ross used for sale

Automatic traysealer is sold, for preformed containers. From the manufacturer Ross Industries, model S45. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 1 sealing lasts. Dimensions of the welding area Last for sealing 3 containers at once: 250 x 180 mm. Busch 250m3/h vacuum pump Used Ross Inpack S45 preformed tray sealing machine with: Medium to high speed modified atmosphere packaging Time, temperature and pressure are monitored and controlled to provide consistent seals Contoured filler plates for minimal gas use Unique film media design to minimize film waste Automatic tray loader 3 up configuration 13 ...

CHARLES ROSS Mixer HSM-100LH2 High speed HSM-100LH-2 Control mc series AC Tech with enclosure hydraulic control HIGHSHEAR MIXER Equipment was excellently maintained. Partly with replacement knives You buy a device here

Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.

We offer you a used pallet rack manufacturer Rosss. Technical data for the pallet control stand: Shelving system: Rosss Included are: 01x Pallet rack, used Material color: sendzimir galvanized Profile: 90 x 75 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

ROSSO sock sewing machine

ROSSI $ CATELLI DEPOSIT WITH STEAM AND AGITATION Tank reactor cooks steam creams of 250 liters of Rossi-Catelli capacity. It has 2 agitation systems, scratching and rapid agitation. Built-in steam installation. Inox 316   Model: Vascamiscelazion Capacity: 250 liters Working pressure: 2 bar Year 2003 Weight: 800 kg Width: 1850 mm High: 2450 mm Length: 950 mm

Automatic punching machine double stand Pressure 125 ton Stroke 10 - 80 mm Stroke rate 50-300 1/min Stand width 1180 mm Table area 1150 x 850 mm Continuous opening in the table 1000 x 220 mm Plunger area 1210 x 550 mm Plunger adjustment 100 mm Material width feed 350 mm Material thickness - 6 mm Punching system incl. Feed Model RS 350 SL Levelers Kohler Reel

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS., Mimu machine tools Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 250, Wheel diameter: 510, C ...

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500 auto plunge also available The machine is in our warehouse in Gussago BS, under power Mimu machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

Gear motor, electric motor, electric gear motor -Engine manufacturer: ASEA type MBT132S -Gearbox manufacturer: Rossi, type RV125U02B -Speed: 99 rpm -Power: 5.5 kW -Construction: B3 -Hollow shaft: Ø 60 x 210 mm -Protection class: IP54 -Dimensions: 470/320/H775 mm -Weight: 149 kg

Drilling and threading machining center. • MANUFACTURER: ROSSINI • MODEL: TR-3-TV • YEAR OF CONSTRUCTION: 1989.

Number of conrods 1 Table dimensions ( x-y/mm) 950 X 700 Slide Dimensions X-Y (mm) 600 X 350 Stroke (mm) 10 - 120 Slide Adjustment (mm) 100 Light at T.D.C.(mm) 480 Strokes type Fixed Stroke per minute 65 Location Turin Italy Machine Conditions Working

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016

Solenoid valve, Indirect electro-pneumatically actuated poppet valve ROSS D2773B6011 Operating pressure: 1 - 10 bar Connections: 1 ( inch ) Control connection: 1/8 ( inch ) 24 V DC 14 VA New ! Dimensions: 200 x 113 x 95 mm

Due to relocation, we sell shelf shelves from the manufacturer SSI Schäfer. Plant in very good condition. Come from renting in a very clean operation. Different versions available. Heights approx. 2200mm. Depth 300 / 400 / 500 / 600mm. Total approx. 500 meters shelf shelves SOFORT available. The offer price is valid for a ( 1 ) attachment shelf with the following specifications: 1 piece frame height 2200mm /depth 500mm 5 pieces of shelves 1000x500mm Specialist load 100kg tray floors with load over 100kg also in stock. For further specifications please ask / Contact Mr. Rössler 02131 / 4064849

Due to bankruptcy custommer cancellation, we sell a pallet shelf system from BITO, who is immediately available. Total pallet places available uot to 2.100 pallet places. The price here is for following combination: 60 x shelf fields with each 3 x beam pairs 3600 x 120 x 50mm Height of the frames 6.600mm. Depth 900 or 1100mm Total quantity: 70 pieces of frames 6600x1100mm, galvanized, dismantled 360 pieces of beams 3600 x 120 x 50, compartment 2.000 kg, Virgin Blue painted More and smaller quantities possible. Please enquire Mr. Rössler / LHS GmbH

Used aseptic filler made by FBR ELPO, new 1997. Machine comes with steriliser made by CFT Rossi Catelli, new 2000.

Gearbox ROSSI MOTORIDUTTORI MR IV125U02A ( MRIV125U02A ) i = 156 shaft Drive: Ø 45 mm shaft Output: Ø 60 mm Flange: Ø 200 mm with fan, New Dimensions: 450 x 375 x 200 mm

Machine control with control box ELEKTROSCHALTGERÄTE GmbH AUERBACH APF 73 Type: 772.00-0396.0/0 Connected load: 0.67 kW Operating voltage: 380 V 3AC 50 / 60 Hz Control voltage: 24 V AC 50 / 60 Hz IP54 2x ROSSMANITH ROfre 892 Type: 89 23 01, 0,,75 kW 1 x MOELLER - DIL ET 11-M 1 x MOELLER - DIL ET 70 1 x MOELLER -PKZM 1-10 1 x MOELLER -PKZM 1-4 1 x MOELLER - DIL ER-40 1 x MOELLER - DIL EM-10 with 22 DIL EM Control box: ELEK GmbH Cabinet system: MS-Stahlblech 600 x 200 x 400 mm used, tested ! Dimensions: 650 x 230 x 400 mm

Gear motor ROSSI MOTORIDUTTORI MR V 40U02A 0,18 kW 43,8 rpm engine: MARELLIMOTORI type: MA63B4 0.18 kW 1360 rpm 220 / 380 V 3AC IP55 shaft diameter: Ø 24 mm sprocket: Ø 105 mm, 24 teeth used, tested ! Dimensions: 340 x 140 x 200 mm

Resistance thermometer, transmitter RÖSSEL 2Pl100 Ω 0°C DIN K1. B °C 377100 Sensor length: 250 mm Sensor diameter: Ø 6 mm Thread: 1/2 inch New , stainless steel ! Dimensions: 340 x 80 x 70 mm

Description: Additional information: Pfauter control cabinet for P 750 NC, - Heldt & Rossi servo amplifier SM 807 DC 1750-90, serial no. according to photo, good condition, weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...