ro used for sale

This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.

JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles

This CLOOS QRH 390 was manufactured in 2013. It features a QRH 390 with a QIROX Controller V6 and a C-stand MH=24330. Equipped with advanced welding technology and an extraction system, this welding robot is ideal for enhancing your production capabilities. Contact us for more information about this machine.

This ABB IRB 1200-7/0.9 Omicore robot arm was manufactured in 2025. It features a reach of 901 mm, supports a payload of 7 kg, and operates efficiently with a power consumption of just 0.38 kW. Its compact footprint (210 × 210 mm) and weight of 54 kg make it ideal for varied applications. Contact us for more information about this machine.

This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information.

This 6s Mitsubishi Electric RV-4FLM robot arm was manufactured in 2018. It features a reach of approximately 649 mm and a payload capacity of up to 4 kg, making it suitable for various industrial automation applications. Consider the opportunity to buy this Mitsubishi Electric RV-4FLM robot arm. Contact us for further details.

This 6-axis FANUC M-10iA / 8L robot arm was manufactured in 2018. It features a maximum reach of 2032 mm, a sound power level of 57.4 dB, and operates within an ambient temperature range of 0-45°C. The robot includes an R-30iB Plus controller and supports a maximum wrist load of 8 kg. Consider the opportunity to buy this FANUC M-10iA / 8L robot arm. Contact us for more information about this machine.

NIKKEN 5 AX - 170 CNC - Rotary Table incl. Controls - Type : 5-axis CNC / rotary table -The NIKKEN / 5 AX - 170 is a compact and robust CNC swivel table for precise milling and drilling work in 4+5 axes -Complete documentation available -Rotary table / dimensions LxWxH 780x340x280mm

Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg

Volumetric pump, Link to manufacturer:: .fristam/product/fl2/, Link to the manufacturer:: .fristam/product/fl2/, Engine: North motor : 1.10 Kw , Rated rotation speed : 58 1/min , Nominal rotation speed : 58 1/min

Automatic roll stippling machine with pallet magazine Kalcher STA-K - Type: STA-K - Year of construction: 2000 - Pallet magazine with 16 supports - Machine for one-man operation for forming Kaiser, Stern, Salz or Poppy seed (button) and pressure rolls

- Filter area: 2.5m2 - Year of construction: 2001 - Vacuum pump in DIN 1.4404 - Incl. mixing tank with agitator. - With equipment for residual filtration - Flow rate (mucus): 450-500 l/h Dimensions: - Depth: 1400 mm - Length: 2100 mm - Height: 1900 mm - Machine with very few operating hours - Machine in perfect condition

This 6s FANUC M20IA robot arm was manufactured in 2020. It features a maximum payload of 20 kg and a reach of 1,811 mm, making it suitable for various applications. With its versatile mounting options and robust protection ratings, consider the opportunity to buy this FANUC M20IA robot arm. Contact us for further details.

Centrifugal pump, motor 1,1kw, Impeller size 130mm, max 18bar, 33m3/h 2800rpm, inlet/outlet 51/51mm

Centrifugal pump, motor 1,5kw, impeller size 160mm, max 18bar 55m3/h, 2800rpm, inlet/outlet 65/51mm

Centrifugal pump, inlet/outlet 51/51mm, motor ABB Motors 4kw 1420 rpm 20m3/h

Centrifugal pump, 11kw, inlet/outlet DN 80 to DN 100 PN16 (DIN2633)

Pallet lift table/ pallet turner Manufacturer: Overbeck Year of Make: 2014 Condition: Good (Used) Drive Type: Chain Drive Total length: approx. 1300 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roll width: approx. 945 mm / Usable width: approx. 880 mm Roll diameter: approx. 80 mm Wheels: 7 pieces Wheel spacing: approx. 200 mm Stock: 2 pieces Price per piece Internal Article Number: 2026030301 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or t ...

An industrial articulated robot Mitsubishi including control unit, teaching box and work table is available. Payload: 3.5kg, axes: 6, reach: 642mm, repeatability: +/-0.02mm, upper arm length: 245mm, forearm length: 270mm, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch

Centrifugal pump, motor 7,5hp/11,5kw; 1400RPM;60m3/h; Id No: 21973. Closed hygienic centrifugal pump with open impeller. The pump meets the highest requirements of the food, pharmaceutical, chemical and water treatment industries. Parts in contact with the working environment are made of stainless steel CF-3M 1.4404/AISI 316L. The clamp body and seal are designed to be quickly disassembled for inspection, cleaning and maintenance. All dimensions are indicated in the drawing. The passport contains the following technical characteristics: liquid lifting height up to 25 meters, volume of pumping liquid up to 1000 l/min (60 m3/h)

Technical data: - Galvanized version with collection container + hydraulically operated lifting roof - Load up to 35 t - Volume of double-walled collection container 2000 l - Distance between running track and roof / lateral opening height 1500 mm - Max. interior height 2300 mm - Connection 400 V - Space requirement approx. L 7100 x W 3300 x H 3050 mm - Weight approx. 7000 kg - from warehouse D - 14943 Luckenwalde

1.0 St. gebr. Robots Manufacturer: FANUC Series: M-10iA/10MS Type: A05B-1221-B902 Year of manufacture: 2018 Max. reach: 1,441 mm Lifting weight: 12 kg The design is food-safe. At present, the robot is installed in a production cell. You can purchase the robot with or without a production cell. The robot was only in use for one year.

Cylindrical grinding machine (inter/exter) STUDER S20 Favorit Tailstock: 650 mm Inter. / exter. SONY 2-axis visualization Watering tray More information on request.

1.0 St. gebr. Robots Manufacturer: FANUC Series: M-10iA/10MS Type: A05B-1221-B902 Year of Make: 2019 Max. reach: 1,441 mm Lifting weight: 12 kg The design is food-safe. At present, the robot is installed in a production cell. You can purchase the robot with or without a production cell. The robot was only in use for one year.

Load capacity: 80kg, horizontal/vertical reach: 2100mm/3300mm, repeatability: +/-0.07mm, weight: approx. 540kg. Documentation available. An on-site inspection is possible.

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6 axes MEI robot arm was manufactured in 2023. This system was manufactured for a project in the automotive industry. It features a total installed power of 26 kW and operates at a maximum peak air flow of 62.5 liters/min. The machine is equipped with a main control cabinet and various pneumatic components from SMC. If you are looking to get high-quality automation capabilities, consider the MEI robot arm we have for sale. Contact us for further details.

Races: X: 900 mm Y: 1800 mm Z: 2500 mm

This 6-axis COMAU Smart NJ 40-2.5 was manufactured in 2019. It features a robust design with a comprehensive set of accessories, including a tool master and connection cables for seamless integration. If you are looking to get high-quality automation capabilities, consider the COMAU Smart NJ 40-2.5 robot arm we have for sale. Contact us for further details.

Shopping X: 400 mm Y: 1000 mm Z: 1500 mm

eight rotary disc dryers from 2008 coming from a grain distillery.

Key data: 350 mm, 1500 mm, 175 mm

1 Outside – Cylindrical Grinding Machine Make: Fortuna Model: F 13 S Year of Make: 1980 Grinding length: 1500 mm Tip height: 175 mm Grinding diameter: 350 mm Grinding wheel diameter: 500 mm Equipment / Accessories: Lynettes Various grinding wheels Coolant Setup Paper Belt Filter

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of Make: 2001 CNC control: Siemens 840C Bore machining range: 150 mm Maximum workpiece depth: 100 mm Largest external processing area: 150 mm Largest swing diameter over table: 310 mm Workpiece spindle speeds: 0 – 3000 rpm. X-axis table lifts: 1050 mm Z-axis: 300 mm Infinitely adjustable feed speed: 0.01 - 10 mm/min Stroke-dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 to.

Offer 26070 Technical data: - Max. load capacity in horizontal position 7500 kg - Face plate dimensions 1500 x 1500 mm - Face plate motorized swivel 0 - 120 ° - Rotary movement electr. infinitely variable 0.0028 - 1.04 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V x 25 kW - Table height in horizontal position approx. 1600 mm - Handheld remote control - Space requirement approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

This 6-axis NACHI MZ04D robot arm was manufactured in 2022. It features a maximum reach of 541 mm and a payload capacity of 4 kg, making it suitable for various applications. The robot is designed with an AC servo drive system and is IP67 rated for dust and drip protection. If you are looking to get high-quality automation capabilities, consider the NACHI MZ04D robot arm we have for sale. Contact us for further details.

11 Watson-Marlow peristaltic pumps for sale in bundles or individually., Elec:: 230 V / 50 Hz / 1850 W

A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

CS 2500-KF PLUS – Industrial Roasters for Nuts, Seeds & Snacks, The robust Ceselsan CS 2500-KF PLUS is a versatile continuous rojust furnace for the industrial processing of nuts, kernels, seeds, dried fruits and snack products. The system offers uniform heat distribution over multiple zones and enables precise control of temperature, product thickness and belt speed – ideal for reproducible product quality., Bandwidth: approx. 860mm, Insertion funnel width: approx.: 860x600 mm, With dragger kettle for salting or seasoning the products to be roasted Type TZM 150 (150 liters). This doses the products in the roaster after mixing., Diameter of the filling opening: about 600 mm,, Only about 30 operating hours., Information from the operating manual of the machine:, Technical specifications, - Dimensions: 3.636 × 1.946 × 2.000 mm, - gas heated, - Electrical consumption:, - Installed pow ...

Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.

Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

sheet width: 3355 mm plate thickness: 63,5 mm roll diameter: 686 mm voltage: 400 V total power requirement: 150 HP weight of the machine ca.: 95 t dimensions of the machine ca.: 62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

15 WATSON-MARLOW / FLEXICON peristaltic pumps Tube sizes compatible: Internal Ø 0.5 to 8.0 mm, Internal Ø 0.5 mm, Internal Ø 0.8 mm, Internal Ø 1.2 mm, Internal Ø 1.6 mm, Internal Ø 10.0 mm, Internal Ø 12.5 mm, Internal Ø 3.0 mm, Internal Ø 3.2 mm, Internal Ø 4.8 mm, Internal Ø 5.0 mm, Internal Ø 6.0 mm, Precision:: ±0,5 % , Elec: : 230 V / 50 Hz / 1850 W , Link to the manufacturer: : .wmfts/fr-fr/flexicon/remplissage-et-controleurs-oem/remplisseuses-oem /

turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Useful length: approx. 1,000 mm, usable width: approx. 200 mm, sturdy stainless steel frame, mobile design, total dimensions (LxWxH): approx. 1,050 x 620 x 1,080 mm, new motor, new belt, belt speed: approx. 30 m/s. Length: approx. 1,100 mm, width: approx. 800 mm, height: approx. 1,100 mm = 08.06.20 dh

Item condition: in working order Availability: as of now Year of construction: 1999 Year of construction Eberhardt: 2013 Technical data: Output adjustable: 4 rows up to 3600 pieces/h, 80-160gr. 5-row up to 4500 pieces/h, 40-90gr. 6 rows up to 5400 pieces/h, 40-90gr. Connected load: 1.87 kW, 2.1 kVA Performance and weight ranges are indicative. Depending on the dough and proofing, the values may vary. Dimensions in mm Stuppling system Cutting machine A 1020 1215 B 890 890 C 1600 1600 D 1700 1700 E 2720 2420 F 2810 2730 Pre-proofing zone, plunger station and automatic stacker in one compact unit: After rounding, the dough pieces are automatically placed in the robust pre-proofing hanger. A ...

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - / Contact us at -