We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,821 used machines on RESALE, but how to find them? Machine Search
used
RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax
used
Load capacity 3000 kg
used
Rolling, feeding and straightening machine make SCHLEICHER type RMS 8 - 53/160 - 1050Year of construction 1985Bandwidth: 250 - 90 mmStrip thickness: 0.5 - 0.8 mmDrive power: 7.7 kWNumber of Straightening Rollers: 8Diameter of straightening rollers: 53 mmWith- loop controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450
used
material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:2,8 t Dimensions (WxDxH):1,6 x 2,2 x 2,3 m
used
material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:3,1 t Dimensions (WxDxH):2,2 x 1,5 x 2,8 m
used
material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000
used
LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...
used
Agilent Cary Eclipse Fluorescence Spectrophotometer; as good as new, Demo model of Agilent YOC 2018 Fluorescence, Phosphorescence,Chemilumnescence, Bioluminiscence Xenon flash lamp, 10 year lamp warranty, sensitivity in the picoMolar range, Sensitivity:
used
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool diameter with occupied adjacent pockets80 mmMax. tool length315 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12600 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 1 ...
used
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)33 kWC-Axis Speed-200 rpmSpeed range20 - 4000 rpmTorque (100% DC)580 NmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Shank diametre according to DIN 6988040 mmNumber of tool stations12 Number of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the ...
GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...
used
Bremsgeräte AER ANTRIEBSELEKTRONIK STATOMAT B 2325 / 01 ( B2325/01 ) RMS current: 200 A Operating voltage: 380 V 3AC Supply voltage: 220 / 110 V AC spare part and spare part a. for wood sanding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 160 x 150 x 160 mm
used
DC Supply: 8 V to 35 V, 1 A max, DC Outputs: 24 V, 15 A (T4 to T5); 2 A (T7 to T14), DC Inputs: 30 V max, Volt-free Outputs: 250 V AC, 8 A, AC Voltage inputs: 600 V AC, 50 Hz / 60 Hz, 1 phase to 3 phase, AC Current inputs: 5 A, 50 Hz / 60 Hz, 1 phase to 3 phase, Charge Alternator: 30 V DC, 2.5 W max, Magnetic: Pickup: 70 V RMS, 10 kHz max, Analog Inputs: 10 V DC max, Comms Port: 5 V DC max, Governor / AVR: +/- 10 V DC
used
Used Gea centrifuge model ASE-20. Year of manufacturing 2019. Allowable rated rotational speed of the drum min-1 1200 (FU:60HZ) Allowable feed material density kg/dm3 1 max. Allowable heavy liquid density kg/dm3 1 max. Allowable solid phase density kg/dm3 1.4 max. Allowable throughput m3/h 400/1.5 min./max Allowable feed temperature ºC /95 min./max Allowable housing pressure range bar (g) -/0.04 min./max Drum filling volume l 3.6 approx. Allowable vibration speed mm/s RMS 7 max. Measuring point on the stand Ambient temperature °C 10/45 min./max plate clamping pressure bar (g) 82-112 CIP possible - yes CIP flow rate l/h -/1800 min./max Sound power level dB (A) 80 DIN EN ISO 3746 Sound power level mW 2.94 DIN EN ISO 3746 Lubricating oil quantity l 2.25 approx. Construction type IMV1 Power kW 11 (FU:7.5KW) Voltage V 400 Frequency Hz 50 Type of protection IP55 Inv ...
used
Bremsgeräte AER ANTRIEBSELEKTRONIK STATOMAT D 2225 / 01 ( D2225/01 ) RMS limit current: 50 + 50 A Operating voltage: 420 V 3AC Supply voltage: 230 / 115 V AC used, tested ! Dimensions: 185 x 165 x 155 mm
used
Hydraulic pump, hydraulic unit, hydraulic tank, hydraulic tank -Hydraulic tank: Tank capacity approx. 40 litres -Filter: RT filter RMS-80 -Filter performance: 80 l/min -Level indicator: -Total dimensions: 490/250/H565 mm -Weight: 23 kg
used
sheet width: mm coil weight: 4 t coil internal dia.: mm material width: 300 mm material thickness: 0,4 - 2,0 mm total power requirement: 8,5 kW weight of the machine ca.: t dimensions of the machine ca.: m Conveyor system consisting of: ALBA decoiler EHA-4-300 and elec.-hydr. Leveler RMS EM 2/6-120/45-300 B, year of manufacture 99 coiler: bundle weight 4000 kg, coil inside diameter 460-620 mm, External coil diameter 1600, dimensions 1500x1140x2300 mm, weight approx. 2000kg Straightening machine: feed rollers number 2 - diameter 120 mm, straightening rollers number 6 - diameter 45 mm, center distance 80 mm, take-off speed 5-20 m/ min, Deduction height above floor 1500 mm, dimensions 1100x740x1800 mm, weightapprox. 600 kg ARKU roll feed, Servomaster 300, year 94 passage width 300 mm, roller diameter 100 mm, max. cross-section 1000 mm², Material thickness 0.1-5mm, feed accuracy better than ...
used
This Röders RFM 760/2 Universal Machining Center was manufactured in the year 2004 in Germany. It is equipped with a Röders RMS 6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm.
Working area 1Longitudinal500 mmCross450 mmVertical400 mmGeneralUniversal milling machine, with compound Guideway construction New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataType of main driveAC Drive power (40% DC)20,3 kWDrive power (100% DC)14,5 kWSpeed range20 - 14000 rpmSpindle taperSK 40 DIN 69871 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMiscellaneousClamping SystemDIN 69872 Floor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table cen ...
GeneralUniversal milling machine, with compound Guideway construction; Control: CELOS with Siemens 840D sl Operate Working area 1Cross450 mmLongitudinal500 mmVertical400 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-18000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre ...
used
x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Used 5-axis bridge-type machining center ROEDERS PXP601DSH (A3750) Condition: USED YEAR 2014 X-AXIS TRAVEL 540 mm Y-AXIS TRAVEL 635 mm Z-AXIS TRAVEL 400 mm DISTANCE SPINDLE NOSE-TABLE 50-555 mm RAPID FEEDS X-Y-Z 60 m/min SPINDLE 42000 rpm; 14 kW; HSK E40 A-AXIS ± 115 ° TABLE SIZE 340 x 340 mm MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 96 POS MAX TOOL DIAMETER 16 mm CONTROL UNIT ROEDERS RMS6X.xx4 WEIGHT 10000 Kg OVERALL DIMENSIONS 2885 x 2760 x 3050 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; SPINDLE COOLING SYSTEM ; EXHAUST SYSTEM NOTE AXES WITH LINEAR MOTOR
used
This Röders TEC RXU 1001 Milling Machine was built in 2017 in Germany and has 19930 hours. It is equipped with a Röders RMS6 control unit and has 3 axis. The machine has a spindle speed of 30000 rpm.
used
This Röders RFM 600/2 Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Roders Tec RMS6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm.
used
Roders RXP600 DSH Precision High Speed ââCNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 à D 2800 à H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 à 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...
used
This Röders TEC RXP 500 Vertical Machining Center was made in 2005 and a general overhaul was made in June 2012, has 52478 hours, of which 21375 are spindle hours. It is equipped with a Röders RMS6 Ver.3.24 control unit. The machine has a spindle speed of 42000 rpm and is in very good condition.