richter iwk used for sale

pressure: 65 t throat: 370 mm stroke: 29-151 mm no. of strokes: 50 Hub/min ram - range of adjustment: 80 mm table surface area: 1300x700 mm ram surface: 1000x600 mm hole in the table: ¦ 110 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1700x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 350t, stroke: 30-200mm, stroke adjustment: 130mm, stroke speed: 30/min, table dimensions: 1700x1250mm, including Roller Feeder Straightening Machine ALBA VhyRia 600S and uncoiler.

Stroke adjustment: 29-160mm, ram adjustment: 130mm, stroke speed: 48/min, connected load: 14kW.

pressure: 160 t dayligth: 600 mm stroke: 25 - 150 mm table surface area: 1500 x 900 mm ram surface: 1500 x 900 mm ram adjustment: 100 mm daylight between the columns: 1500 mm daylight between the side columns: 400 x 200 mm distance between columns: 1680 mm weight of the machine ca.: 15 t dimensions of the machine ca.: 2,7 x 1,8 x 4,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle press make RICHTER type HSP 25Machine -No: 510 built in 1953Max. Press force: 25 tTable size: 540 x 400 mmBear size: 420 x 200 mmSpindle diameter: 70 mmStroke: 180 mmExternal dimensions approx: 1200 x 1200 x 2000 mmused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single Stand - Eccentric Press PELS - RICHTER Type PEKR 125 Masch. No. 20684 Year of construction 1967 Compressive force 125 ton. Projection 430 mm Table size 1100 x 750 mm Ram surface 890 x 650 mm Table opening 400 mm Stroke adjustment 6 to 115 mm Ram adjustment 100 mm Installation height largest stroke above max. 450 mm Clamping pin bore 50 mm Stroke rate 60 strokes/min. Table height above corridor 900 mm Motor power 7.5 kW Mains connection 380 volts, 50 Hz - Overload protection by crushing plate in the plunger - Compressed air Clutch-brake combination DESCH- Plunge weight compensation cylinder - Manual ram position - Two-hand operation - Cam switchgear - Grease central lubrication Vögele - Stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm Weight approx. 10 ton. good condition; used

Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar -Limit signaller: Type M1 -Screw connection: see photos -Dimension: 170/135/H135 mm -Weight: 2.1 kg

pressure:160 t distance between columns:2050/1900 mm stroke:15 - 170 mm no. of strokes:15 - 40 /min distance table/ram, max. stroke up, adjustment up:690 mm table surface area:1600 x 800 mm side window:800 mm ram surface:1620 x 700 mm ram adjustment:140 mm power requirement:15,0 kW weight:24,0 t Dimensions (WxDxH):3,3 x 2,3 x 5,3 m height over floor:4,8 m height beneath floor:0,5 m clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

Tube filling- and closing machine for pre capped ALU tubes. Machines is fitted with a tube loader TZ101, Laetus coding device and various accessories. PLC: Siemens type Simatic S5. Output: 80 tubes/min.

Tube filling and closing machine for metall tubes. Machine comes in line with IWKA-cartoning machine, type Cartonpac CPS-R.

Elec: 380V / 50Hz, Pressurized air: 6 to 7 bar, Integrated vacuum pump: Yes, A (mm): 20-85, B (mm): 17-65, C (mm): 50-200, Dimensions (mm): 3700x1860 H2060, Documentation: Yes

IWKA Model CP150 Automatic Horizontal bottle Cartoner. Capable of speeds up to 150 cartons per minute. Carton size: (Length) 20mm-90mm, (Width) 15mm-60mm, (Depth) 55mm-180mm. Set up for Reverse tuck style cartons. Has Embosse coding unit , GUK sheetfed leaflet feeder .

Tube filling machine,stainless steel,IWKA TU 60,for plastic and metal,tubes max 350 ml dosage.

This unit is a filling and closing machine for metallic, aluminium tubes. The construction principles, materials used and innovative concepts guarantee maximum productivity, user friendliness and quality, making this machine an ideal solution for the pharmaceutical and the cosmetic market. Special consideration was given to a rapid change over to different tube sizes and consistency of filling product. The in-built flexibility makes it the ideal machine for use in research and development. Easy to use machine with excellent access for cleaning and maintenance. Technical data: Length mm 1825 Width mm 1115 Height mm 2150 Net weight Kg 2200 Production characteristics: Tube diam. min-max 10-52 mm Tube length min-max 52-250 mm Dosage min-max 2,5-500 ml Production capacity 40-120 tubes/min Automatic tube filling machine equipped with heated funnel, agitated hopper and 14 ...

-Winding unit with right winding sense -Winding buckthorn holder for coils Inner diameter 2-5mm -Winding number 2-30 -Wire thickness 0.25-1mm -Gear translation AA + DD -Roller-drht richter -380V; 50Hz; -Documentation, spare parts plans Explusinszeichnungen and schematic available -Dimensions Space requirement 675 H430 735mm low Ehcubsv -Weight 65Kg

pressure: 150 t Table dimensions: 1000 x 360 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min dayligth: 525 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t Table dimensions: 1000 x 360 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1900 mm surface area: 6000x2500 mm control: Siemens type: 840D Tool changer: 40 chip conveyor: Richter b-axis: +/- 110 ° c-axis: 360° 0 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...

Table length: 9500 mm Table width: 1100 mm Longitudinal X: 8000 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Siemens MACH-id          6049 MAKE               LAGUN Spain TYPE                GBM CM8 YOP                   2010 SPECIFICATIONS X-Axis       8000 mm Y-Axis       1200 mm Z-Axis       1500 mm Table load         25000 Kg Power on spindle      34,5 kW Spindle speeds           4000 Rpm Millinghead auto-index          2,5 x 2,5 ° Feed rate X-Axis            20.000 mm/min. Feed rate Y-Axis   ...

Type: FA 1643 CL Working surface: approx. 1,400 x 4,000 mm Drive by Richter exciter DF 401S

IWKA TZK100 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 12 to 50 mm and a maximum tube length of 235 mm, rod length 730 to 850 mm, capacity from 40 to 100 tubes per minute,compressed air 6-8 bar, machine floor space approx. 2000 x 690 mm (LxW), machine height approx. 1570 mm, machine net weight approx. 570 kg

Micrometer Feinmesszeugfabrik Suhl, RICHTER Meßwerkzeuge Range: 100 - 200 mm TGL 15046/I Division. 0.01 mm with protective box used, tested ! Dimensions: 410 x 225 x 42 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump RICHTER CHEMIE-TECHNIK GmbH RM 1,5x1x8 Class 150 impeller diameter: Ø 8,0 inch ( approx. 203.2 mm ) Input: Ø 1.5 inch ( approx. 38.1 mm) DN40 Flange diameter: Ø 132 mm Output: Ø 1.0 inch ( approx. 25.4 mm ) DN25 Flange diameter: Ø 112 mm motor: SIEMENS NEMA Premium type SD 100 215 TC ( SD100215TC ) 7.5 H.p. ( 7.5 hp, approx. 5.52 kW ) 2930 rpm 200 / 400 V 3AC, 50 Hz approx. 15 m connection cable with cable protection conduit type LA, size 1/2 inch, 4-wire with plug ( HARTING ) used, tested ! Dimensions: 830 x 400 x 340 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump RICHTER CHEMIE-TECHNIK GmbH RM 1,5x1x6 Class 150 impeller diameter: Ø 6,0 inch ( approx. 152.4 mm ) Input: Ø 1.5 inch ( approx. 38.1 mm) DN40 Flange diameter: Ø 132 mm Output: Ø 1.0 inch ( approx. 25.4 mm ) DN25 Flange diameter: Ø 112 mm motor: SIEMENS NEMA Premium type SD 100 182 TC ( SD100182TC ) 2 H.p. ( 2.0 hp, approx. 1.47 kW ) 1478 rpm 200 / 400 V 3AC, 50 Hz approx. 15 m connection cable with cable protection conduit type LA, size 1/2 inch, 4-wire with plug ( HARTING ) used, tested ! Dimensions: 740 x 360 x 310 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump RICHTER CHEMIE-TECHNIK GmbH RMA 1,5x1x6 Class 150 impeller diameter: Ø 5,3 inch ( approx. 134.62 mm ) Input: Ø 1.5 inch ( approx. 38.1 mm) DN40 Flange diameter: Ø 132 mm Output: Ø 1.0 inch ( approx. 25.4 mm ) DN25 Flange diameter: Ø 112 mm motor: SIEMENS NEMA Premium type SD 100 182 TC ( SD100182TC ) 2 H.p. ( 2.0 hp, approx. 1.47 kW ) 1478 rpm 200 / 400 V 3AC, 50 Hz approx. 15 m connection cable with cable protection conduit type LA, size 1/2 inch, 4-wire with plug ( HARTING ) used, tested ! Dimensions: 740 x 360 x 310 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump RICHTER CHEMIE-TECHNIK GmbH RMA-B 1,5x1x8 Class 150 impeller diameter: Ø 7,99 inch ( approx. 202.95 mm ) Input: Ø 1.5 inch ( approx. 38.1 mm) DN40 Flange diameter: Ø 132 mm Output: Ø 1.0 inch ( approx. 25.4 mm ) DN25 Flange diameter: Ø 112 mm Engine: SIEMENS NEMA Premium Type SD 100 215 TC ( SD100215TC ) 7.5 H.p. ( 7.5 hp, approx. 5.52 kW ) 2930 rpm 200 / 400 V 3AC, 50 Hz approx. 15 m connection cable with cable protection conduit type LA, size 1/2 inch, 4-wire with plug ( HARTING ) used, tested ! overhauled ! Dimensions: 830 x 400 x 340 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump RICHTER CHEMIE-TECHNIK GmbH RM 1,5x1x8 Class 150 impeller diameter: Ø 8,0 inch ( approx. 203.2 mm ) Input: Ø 1.5 inch ( approx. 38.1 mm) DN40 Flange diameter: Ø 132 mm Output: Ø 1.0 inch ( approx. 25.4 mm ) DN25 Flange diameter: Ø 112 mm Motor: SIEMENS NEMA Premium Type SD 100 215 TC ( SD100215TC ) 7,46 kW 2930 rpm 200 / 400 V 3AC, 50 Hz New ! Dimensions: 830 x 430 x 330 mm

Containment shell for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 6/RMI160 Material number: 9418-35-1001 Material: SSIC/SG PLUS Pot diameter: Ø 167 mm Pot height: 125 mm Flange diameter: Ø 220 mm New ! Dimensions ( packaging ): 260 x 260 x 130 mm

Containment shell insert for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 6/RMI160 Material number: 9418-35-1051 Material: SSIC/SG PLUS Pot diameter: Ø 164 mm Pot height: 125 mm Flange diameter: Ø 220 mm New ! Dimensions ( packaging ): 230 x 230 x 130 mm

Hydraulic pump, oil pump, gear pump, hydraulic unit -Manufacturer: ORSTA, hydraulic pump with clutch bell -Pump Type: A25R -Clutch bell: IWK 8420523 -Shaft: Ø 22 x 25 mm Recess: Ø 250 mm -Hole circle: Ø 300 x 18 mm -Dimensions: 285/285/H245 mm -Weight: 7.1kg

Containment shell insert for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1.5 x 1 x 8 Material number: 9418-35-1061 Material: SSIC/SG PLUS Pot diameter: Ø 164 mm Pot height: 125 mm Flange diameter: Ø 240 mm New dimensions ( packaging ): 250 x 250 x 130 mm

Description: - Control: conventional - Pressure: 125 t - Throat: 400 mm - Stroke: 6 - 160 mm - Total power requirement: 11 kW - Number of strokes: 60 Strokes/min - Installation height: 525 mm - Ram adjustment: 100 mm - Ram surface: 800 x 550 mm - Table surface: 1100 x 750 mm - Drain opening in Table: 400 mm - Stand passage: 740 weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 3,300 mm

Impeller with pump rotor for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1,5 x 1 x 6 impeller, closed: D175 Material number: 9427-93-1006 diameter: 175 mm, width: 20 mm pump rotor: 50 Nm Material number: 9427-93-3002 Bearing bushing diameter: Ø 45 mm Shaft bushing: Ø 24.5 mm New ! Dimensions: 175 x 175 x 127 mm

Impeller for magnetic clutch centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1,,5 x 1 x 8 impeller, closed: D203 Material number: 9427-93-1011 diameter: 203 mm, width: 21.5 mm bearing bush diameter: Ø 45 mm shaft feedthrough: Ø 26.0 mm New ! Dimensions: 203 x 203 x 125 mm

Cellular rubber tape RICHTERS 50 x 8 mm Width: 50 mm Material thickness: 8 mm Number of rollers: 6 Roll length: 5 m Material: Cellular rubber, self-adhesive Other quantities on request ! New ! Dimensions ( single roll ): 240 x 240 x 50 mm Dimensions ( packaging ): 255 x 255 x 310 mm

pressure:400 t throat:520 mm stroke:20 - 200 mm no. of strokes:30 /min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:1600 x 1000 mm table height over floor:715 mm passage to the back:1000 mm ram surface:1300 x 800 mm ram adjustment:130 mm power requirement:38,0 kW weight:41,0 t dimensions (WxDxH):2,1 x 2,6 x 4,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

Cellular rubber tape RICHTERS 25 x 5 mm width: 25 mm material thickness: 5 mm Number of rollers: 9 roll length: 10 m Material: cellular rubber, self-adhesive Other quantities on request ! New ! Dimensions ( single roll ): 260 x 260 x 25 mm Dimensions ( packaging ): 265 x 265 x 310 mm