4549 offers rep rubber

maximum number of results exceeded > 1000
please refine your search

Category: 301 injection moulding machines / Injection molding machines for rubber
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 159321742

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

REP H48Y10W Horizontal Injection Moulding Machine Year of construction 2005 Machine Parameters Volume [cm3] 1000 Clamping force [kN] 1930 Injection pressure [bar] 1500 Moulds dimension [mm] 450x450 Tonnage 1.9t Platen size: 450x450 Cycles: 2,220,383 General condition: operational Dims [mm]: 4200 L x 1400 W x 2200 H Weight [kg]: 6750

Category: 307 rubber machines / Rubber injection presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 162160038

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Rep B46 Injection Moulding Machine Size of platens 430x430mm Injection unit short volume 670cm3 Injection pressure 1690 bar Injection force 331kN

Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
ankerimg
item-No.: 9267175
New in: 1970

used

check Seller: Euro Rubber Lines
Location: Thornton Land-uk

add to watchlist

1 x Repiquet 2550mm wide x 820mm dia 4 roll inverted L Calender, Machine type: CALANDRE 4 CYL DE 820 x 2550, Machine no. 70-C9-87 Motorised nip adjustment, Peripherally drilled rolls, High pressure hot water hearing Bush bearings with flood lubrication, Hydraulic pre-loading to all rolls, Roll bending and unbending on roll 4, Cross axis on roll 3 and 1. Automatic bank sensors/control + camera system Traversing unit for roll buffing or sand blasting. 'Citroen' unidrive gearbox, type: SPECIAL, order no. 50491, Power 140/240 C.V. Speed 1500/2250, Output 46/59 with individual motor to each roll- Roll 1 and 4 - 130HP, Roll 2 and 3 - 240HP, Max calender speed 120m/min. Dual embossing station with approx 25 x embossing rolls (+ 5 x rubber pressure rollers) In very good condition.

Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 7936384
New in: 2003

used

check Seller: Euro Rubber Lines
Location: nr Blackpool Land-uk

add to watchlist

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Category: 106 presses / Low-Pulling Presses
Latest update: 19.04.2024 add to watchlist
approved
dealer
item-No.: 158651010
New in: 2001

used

check Seller: WeMa A. Pigge GmbH
Location: ab Standort Land-de

add to watchlist

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 307 rubber machines / Rubber injection presses
Latest update: 19.04.2024 add to watchlist
approved
dealer
item-No.: 160203145
New in: 2005

used

check Seller: MEB Maschinenhandel GmbH
Location: Schweiz Land-de

add to watchlist

clamping force: 1.013 kN injection volume: 400 cm³ screw diameter: 25 mm platen size: 335 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used clamping unit: - clamping unit: vertical - clamping force: 1.013 kN - size of heating platen: 335 x 400 mm (standard) core turning unit Injection unit: - screw diameter: 25 mm - Barrel diameter: 51 mm - Injection volume max.: 400 cm³ - Injection pressure: 1,500 bar - Connection value: 3x 400 V, 50 Hz 42A fuse protection (incl. periphery) - Electrical power: 29,1 kVA - Control: G8 Control - Hydraulics: 250 bar (tank 200 litres) - Further connections: Cooling water inlet/outlet Dimensions L/W/H approx.: 2,300 x 3,400 x 2,250 mm Weight approx.: 2,950 kg Not for sale: Article-specific extensions (demoulding unit,  ...

Category: 707 catering machines / Quick cooking kettles
Latest update: 26.01.2024 add to watchlist
item-No.: 163220411

used

Seller: INNOTEC FOOD EQUIPMENT S.L
Location: 28046 MADRID Land-es

add to watchlist

LIQUIDATION of Direct Fire Gas Kettle. Product to be re-released. Manufactured by REPAGAS model MG-91. Made entirely of stainless steel with a tank bottom made of special AISI-316-L stainless steel. Capacity: 100 litres. Flip-top and offset. Adjustable lid for better cooking and energy saving. Hot and cold water filling taps. Tank drain tap. External dimensions: 800 x 950 x 1030 mm high. Medium boiler interior: 600 x 400 mm high. Cooking kettle, indirect fire kettle, direct fire kettle, food machinery, meat machinery. Its condition is excellent re-release. Virtually new overhauled and guaranteed equipment. OCCASION. NEGOTIABLE PRICE

Category: 305 peripheral equipment (e.g. heating,cooling,drying) / Compressed air, vacuum and thermo moulders
Latest update: 20.03.2024 add to watchlist
approved
dealer
item-No.: 163617079
New in: 1991

used

check Seller: Plastima Used Machinery
Location: 4817 Breda Land-nl

add to watchlist

Brand: McNeil AKRON REPIQUET Model: VAB 500/6 Year of construction: 1991 Tube outer diameter max: 500 mm Cooling length: 6000 mm Spray pump: 11 kW

Category: 1001 plants for concrete and precast technology
Latest update: 10.04.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 163765812

used

check Seller:
Location: Österreich Land-de

add to watchlist

Pruning shears made by Reppel type TU 20-6 = - Weight: approx. 4.0 to -Sheet width/ sheet thickness 6mm

Category: 307 rubber machines / Rubber extruders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 123726245

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

8" Cold Feed Rubber Extruder

Category: 2500 miscellaneous
Latest update: 26.03.2024 add to watchlist
approved
dealer
item-No.: 124207511

used

check Seller:
Location: Land-nl
Price: 45 € add to watchlist

Te Koop: Rubber expansion joints. Merk: Toraflex. Type: PMS 16 bar TMS 110 degrees! 00% EPMD. Bellows: DN 100 PN 16. Flens doorsnee, 220mm 8 gating HoH: 180mm Doorsnee gat: 18mm

Category: 1001 plants for concrete and precast technology
Latest update: 04.11.2023 add to watchlist
approved
dealer
item-No.: 911038

used

check Seller: Contec e.K.
Location: Land-de

add to watchlist

Rubber buffers / silent blocs for concrete block machines Brands: SCHLOSSER, Hess, Masa, Omag, Rekers, Frima, Techmatic Web: contec-ek

Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
ankerimg
item-No.: 509710
New in: 1992

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

Category: 302 extruders
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 3273503
New in: 1991

used

check Seller: K & K Industrievertretungen GmbH
Location: Land-de

add to watchlist

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Category: 302 extruders
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 3273505
New in: 1991

used

check Seller: K & K Industrievertretungen GmbH
Location: Land-de

add to watchlist

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Category: 302 extruders
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 7906936

used

check Seller: Euro Rubber Lines
Location: nr Blackpool Land-uk

add to watchlist

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Category: 307 rubber machines
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 10621565

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

Category: 307 rubber machines / Rubber extruders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 16174529
New in: 1994

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Category: 307 rubber machines / Rubber extruders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 16174530
New in: 1980

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Barwell C3 Preformer Extruder 2500 psi Output 600kg/hour Ram type Extruder Extruder size 250mm With Rotary Cutter 8 fixed speeds Year 1980

Category: 307 rubber machines / Rubber extruders
Latest update: 23.06.2016 add to watchlist
approved
dealer
ankerimg
item-No.: 14001070
New in: 1988

used

check Seller: Euro Rubber Lines
Location: Land-uk

add to watchlist

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Category: 307 rubber machines / Rubber testing devices
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 18541200
New in: 1992

used

check Seller: Euro Rubber Lines
Location: Land-uk
VS

add to watchlist

1 x Alpha Technologies Mooney MV2000e Viscometer software discs and operation manual are included. You will have to register the software. PC not available. In good condition.

Category: 307 rubber machines / Rubber testing devices
Latest update: 23.06.2016 add to watchlist
approved
dealer
item-No.: 18541206
New in: 1991

used

check Seller: Euro Rubber Lines
Location: Land-uk
VS

add to watchlist

1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.

Category: 307 rubber machines / Rubber processing machines
Latest update: 18.04.2024 add to watchlist
approved
dealer
item-No.: 29967961
New in: 2004

used

check Seller: Pelmar Engineering Germany GmbH
Location: Traiskirchen Land-de

add to watchlist

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!

Category: 207 gluespreader machines
Latest update: 17.02.2024 add to watchlist
approved
dealer
item-No.: 109401822

new

check Seller: Winter Holztechnik GmbH
Location: Land-de
Price: 190 € add to watchlist

Technical data: - Foam rubber roller width 180 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

Category: 207 gluespreader machines
Latest update: 17.02.2024 add to watchlist
approved
dealer
item-No.: 109401842

new

check Seller: Winter Holztechnik GmbH
Location: Land-de
Price: 160 € add to watchlist

Technical data: - Foam rubber roller width 72 mm- glue roller for gluing surfaces- with stand - absper lever for stopping the glue flow

Category: 309 mills
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 105286502
New in: 1986

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Buzuluk 84inch Two Roll Mill (Double Roller) Year 1986 Roller diameter 660 mm Length of roller 2100 mm Number of rollers 2 Drilled rolls Speed of the rear roller 36,2 m/min Speed of the front roller 29,6 m/min The ratio of the gear wheels 1 : 1,22 The roller bearings antifriction The consumption of the cooling water 12 m3 per hour Maximum gap between rollers 30 mm The main electric motor 160 kW, 985 operating speed/min, 380V, 50 Hz Gear ratio of gearbox i = 10 Machine dimension L x W x H 5500 x 4000 x 1960 mm Machine weight 35 860 kg

Category: 310 spare parts for plastic machinery
Latest update: 04.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 147512819

used

check Seller: SGT SERVIS, spol. s r. o.
Location: Land-cz

add to watchlist

Knife Drawing No. 05714-223C1

Category: 307 rubber machines / Rubber processing machines
Latest update: 18.04.2024 add to watchlist
approved
dealer
item-No.: 128944255
New in: 2015

used

check Seller: Pelmar Engineering Germany GmbH
Location: 63457 Hanau, Agnes-Pockels-Str. 2 Land-de

add to watchlist

Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm

Category: 307 rubber machines / Rubber injection presses
Latest update: 28.03.2019 add to watchlist
approved
dealer
item-No.: 133860950
New in: 2000

used

check Seller: Euro Rubber Lines
Location: 0 Thornton, Hillhouse Business Park Land-uk

add to watchlist

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Category: 307 rubber machines
Latest update: 27.02.2024 add to watchlist
approved
dealer
item-No.: 143199846
New in: 1984

used

check Seller: OLLER-TRADE
Location: Land-pl
Price: 14.000 € add to watchlist

Polish roll mill 550 x 1500mm. Roll gap adjustment - motorized. Main motor power 90kW. Very good technical condition.

Category: 307 rubber machines / Rubber cutting machines
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 146674133

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Bale Cutter Guillotine Blade is approx. 35inch wide

Category: 310 spare parts for plastic machinery
Latest update: 04.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 147512820

used

check Seller: SGT SERVIS, spol. s r. o.
Location: Land-cz

add to watchlist

Guided from bronze Drawing No. 05714 -227D1

Category: 307 rubber machines / Rubber extruders
Latest update: 13.11.2023 add to watchlist
item-No.: 149951819
New in: 2019

used

Seller: Ankele Kunststoffmaschinenbau
Location: 75433 Maulbronn Land-de

add to watchlist

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Category: 307 rubber machines / Rubber extruders
Latest update: 18.04.2024 add to watchlist
approved
dealer
item-No.: 150671556
New in: 1987

used

check Seller: Pelmar Engineering Germany GmbH
Location: 63457 Hanau Land-de

add to watchlist

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Category: 307 rubber machines / Rubber extruders
Latest update: 18.04.2024 add to watchlist
approved
dealer
item-No.: 150671561
New in: 1997

used

check Seller: Pelmar Engineering Germany GmbH
Location: 63457 Hanau Land-de

add to watchlist

Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!

Category: 307 rubber machines
Latest update: 19.04.2024 add to watchlist
approved
dealer
item-No.: 156875340

used

check Seller: MEB Maschinenhandel GmbH
Location: Süddeutschland Land-de

add to watchlist

0: 230 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 2000 spare parts
Latest update: 29.01.2024 add to watchlist
approved
dealer
item-No.: 160417013
New in: 2022

new

check Seller: Silicon plus
Location: 85232 Bergkirchen Land-de
Price: 499 € add to watchlist

Rubber Air Spring, Vibratory mounts, Machine Feet, Machine Legs, Antivibratory feet, Leveling Feet, Heavy Duty Feet Load (Kg/pc): 1200 - 3400 Max. Pressure Bar: 6 Dimensions: S: 370mm D: 360mm H App: 111mm d: 200mm h: 8mm Bolt: M20 Four pieces on stock. Similar models that we can produce: TL1: Load (Kg/pc): 25 - 60 Max. Pressure Bar: 3 TL2: 80 - 300 Load (Kg/pc): Max. Pressure Bar: TL3: Load (Kg/pc): 270 - 800 Max. Pressure Bar: 5 TL4: Load (Kg/pc): 650 - 1500 Max. Pressure Bar: 6 TL6: Load (Kg/pc): 3000 - 6500 Max. Pressure Bar: 6 It can fit to Bruderer, Mabu, Schaal, Schuler, Haulich and other machines. For any questions please contact us.

Category: 307 rubber machines / Rubber cutting machines
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 157163697

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Fogg & Young Bale Cutter

Category: 307 rubber machines / Rubber processing machines
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 159036833
New in: 1997

used

check Seller: Andrew Isaacs Machinery International Ltd
Location: Land-uk
VS

add to watchlist

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Category: 2100 electrical parts
Latest update: 04.12.2023 add to watchlist
approved
dealer
item-No.: 160018997

new

check Seller: IPV GmbH
Location: Land-at
Price: 8 € add to watchlist

Rubber flat cable 12x1,5, RHEYFLAT-N NGFLGOEU-J, Nexans, new 1 x 100m, 1x23m Special price As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. In dry, damp and wet rooms as well as outdoors as a flexible energy and control cable, under medium mechanical loads. The cables are intended for the connection of moving parts of machine tools, conveyor systems, cranes, etc. if the cables are only exposed to bending stresses in one plane. Veins grouped into groups, the individual groups are separated by a bridge.

Category: 109 other metal working machines
Latest update: 19.04.2024 add to watchlist
approved
dealer
item-No.: 160453608
New in: 1968

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 3.800 € add to watchlist

Pile cutting machine, stack cutter, face cutter SCHNEIDER type Senator 155 Rubber, paper and veneer shears Masch. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125 mm Application height 140 mm Backgauge max. 1550 mm Motor power Knife drive 5.5 kW Mains connection 380 volts, 50 Hz - 2-hand operation for stroke triggering - automatic pressing by hold-down presses the stack of paper onto the table - Kickback (backgauge) with digital dimension selection and sequence cut adjustment via control - Backgauge adjustment via servo motor (motor and control has been retrofitted) Space requirement L x W x H 300 x 270 x 165 cm Weight 5100 kg good condition Ideal for cutting paper, cardboard, leather, cork, rubber or fabric reinforced rubber; used

Category: 307 rubber machines / Rubber injection presses
Latest update: 23.11.2023 add to watchlist
approved
dealer
item-No.: 160608174
New in: 2017

used

check Seller: TMS CO.,LTD
Location: Land-kr

add to watchlist

DESMA 400 ton rubber injection molding machine -Model : SIGMA 4000

Category: 207 gluespreader machines
Latest update: 22.03.2024 add to watchlist
approved
dealer
item-No.: 160734902

used

check Seller: TOMESANI Srl
Location: Land-it
Price: 3.800 € add to watchlist

Code: 0005 Brand: OMMA / OTHER BRANDS 2300 Model: 2300 Nr 2 rubber-coated rollers Technical data Length mm 2300 Diameter mm 230 Rifling 3,4 x 1 cm / 9 x 1" (inch) Overall dimensions of wooden crate for 2 rollers: mm 3000 x 900 x 550 h Weight kg 800

Category: 307 rubber machines / Rubber extruders
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 161155846

used

check Seller: G3 Mixing Technologies
Location: 63082 Castel di Lama Land-it

add to watchlist

Refer to code 1042 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rubber extruders
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 161155849

used

check Seller: G3 Mixing Technologies
Location: 63082 Castel di Lama Land-it

add to watchlist

Refer to code 1043 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rubber extruders
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 161155851

used

check Seller: G3 Mixing Technologies
Location: 63082 Castel di Lama Land-it

add to watchlist

Refer to code 1044 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rubber extruders
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 161155853

used

check Seller: G3 Mixing Technologies
Location: 63082 Castel di Lama Land-it

add to watchlist

Refer to code 1045 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rubber extruders
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 161155854

used

check Seller: G3 Mixing Technologies
Location: 63082 Castel di Lama Land-it

add to watchlist

Refer to code 1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rubber cutting machines
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 161197565

used

check Seller: G3 Mixing Technologies
Location: 63082 Castel di Lama Land-it

add to watchlist

Refer to code 1049 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rubber testing devices
Latest update: 29.11.2023 add to watchlist
item-No.: 161442976
New in: 2012

used

Seller: Silspek Rubber Sp. z o.o.
Location: Land-pl
Price: 14.000 € add to watchlist

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online