We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,651 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
For sale lot of machines, main for thread grinding, and gear grinding, also horizontal pfauter, best price for bundle. Reishauer NRK Reishauer US x2 Klingelnberg HNC 35K Wmw hinterdrehmachine x2 Reinecker hinterdrehmachine Kapp grinding Wmw niles 35/20-29 Horizontal Pfauter Lindner grinding x2 Klingelnberg gear test machines
used
max. wheel diameter: 330 mm gear width: 180 mm max. module: 7 min. module: 0,5 total power requirement: 12 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. wheel diameter : 300 mm Gear width : 180 mm Max. module : 5 Min. module : 0,5 Max. table load : 50 kg Number of teeth : 7-256 Max. helix angle : +/-45° Max. diameter of grinding wheel : 350 mm Turning speeds : 1100-1900 U/min
used
Max. wheel diameter : 300 mm Gear width : 180 mm Max. module : 5 Min. module : 0,5 Max. table load : 50 kg Number of teeth : 7-256 Max. helix angle : +/-45° Max. diameter of grinding wheel : 350 mm Turning speeds : 1100-1900 U/min
used
Max. wheel diameter : 400 mm Gear width : 0 - 300 mm Max. module : 8 Min. module : 0,3 Number of teeth : 5 - 999 Tooth width (Z1- grinding slide travel) : 0 - 300 mm Centre distance : 60 - 700 mm Max. helix angle : +/- 45 ° Workpiece weight max : 300 kg Tip circle diameter : 10 - 400 mm Root circle diameter : 10 - 400 mm Equipment/Accessories : CNC : Siemens 840D Pallet conveyor : Coolant/filter device Novotecnic : CNC dressing device REISHAUER :
used
Gear grinder REISHAUER OZA with change gears.
used
I sell a gear grinding machine with whole equipment, grinders, exchange gears and technical data. We are selling the machine only because we bought her for a project that we did not become. So that we didnt worked with the machine never, we do not know the condition of the machine and we are selling the machine in seen condition. On the machine is a balancing and a sharpening unit for the grinding wheel.
used
max diameter of the tooth heads wheel: 300 mm minimum diameter of the bottom of the grooves: 10 mm max number of teeth: 130 min. number of teeth: 12 (10) max module: 5 max angle of teeth inclination: 45 degrees sled stroke: 180 mm max object weight: 60 kg max diameter of grinding wheel: 350 mm min. grinding wheel diameter: 270 mm grinding wheel width: 62/84 mm grinding wheel hole: 160 mm
used
Manufacturer: Reishauer AG : Switzerland in working condition... sample grinding can be done on request. Specifications: Max impeller diameter: 300 mm Gear width: 170 mm / / Module:-Min: 0.5 -Max: 5 Clamping length max: 420 mm Tooth angle Max: 45 grad Number of teeth: 12 -Min: 12 // -Max: 130 Contour slide: 200 mm Helical lead -Min: 200 mm -Max: 6000 mm Max diameter of grinding wheel: 350 mm Max wheel grinding width: 84 mm Vudg7ohvx Total power requirement: 9 kW Dimensions 2500 x 2000 x 2300 mm Total weight: 4600 kg
used
Max. grinding length : 450 mm Max.clamping length : 700 mm Thread diameter : 3–200 mm Thread pitch : 0,40–80 mm Max. angle pitch : -25º / +25º Grinding wheel diameter : 275-350 mm Grinding wheel width : 8-40 mm Grinding wheel bore : 160 mm Grinding wheel speed : 1550-1900 rpm Weight approx : 3500 kg
used
max. wheel diameter:150 mm max. module:3 min. module:1 weight of the machine ca.:7,2 t dimensions of the machine ca.:2,44 x 1,43 x 2,46 m grinding wheel diameter:206-275 mm Betriebsstunden: 99.235 Incl. automatic loading system Felsomat, without filter No Twist Control Grinding Option
used
max. wheel diameter:150 mm max. module:3 min. module:1 weight of the machine ca.:7,2 t dimensions of the machine ca.:2,44 x 1,43 x 2,46 m grinding wheel diameter:206-275 mm Working hours 98.780 Incl. automatic loading system Felsomat No Twist Control Grinding Option
used
max. wheel diameter:400 mm max. module:10 min. module:0,3 weight of the machine ca.:11,5 t dimensions of the machine ca.:3,3 x 2,75 x 2,8 m max. number of teeth:999 min. number of teeth:5 Width of teeth:0-300 mm pressure angle max.:30 pressure angle min.:14 workpiece weight max.:300 kg worm grinding diameter:300...205 mm width of grinding worm:125+0,7 / -0,5 mm boring diameter:160 H7 mm with loading device FELSOMAT Type: FZ250 Year of construction: 2002 No tail stock
used
Reishauer AZA Gear Grinder The machine is in very good condition with complete equipment. It is connected to electricity and can be seen in operation. Complete documentation.
used
workpiece diameter: 240 mm centre distance: 0 mm honing length max.: 500 mm max. module: 5 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Change gear set for Reishauer UL 1800, , in a wooden box Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 125 kg
used
Description: Change gear set for Reishauer UL 1800, , in a wooden box Approx. Onsite Dimension. (l x w x h): 950 x 600 x 450 mm, weight approx.: 175 kg
used
thread dia.: 250 mm grinding length: 500 mm thread pitch: - mm tread diameter: 2 mm clamping length - spindle head right: 900 mm spindle bore: 66 mm clamping length - spindle head left: 1020 mm workpiece weight: 200 kg pitch: 0,8 - 288 mm pitch angle: +/- 40 ° workpiece turning speeds: 0,4 - 50 U/min grinding wheel width: 8/13/16/20/30 mm table feed: 1500 mm/min grinding spindle speed: 1900-2450 U/min no. of feed: 12 max. thread profile: 12,5 Modul number of starts: 1 - 8 dia. of hole: 160 mm grinding wheel diam. min/max.: 275 / 350 mm grinding motor: 16 kW electrics - voltage/frequency: 3 x 380 / 50 V/Hz total power requirement: ca. 20 / 45 kW / KVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 5,7 x 4,7 x 2,6 m profiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with: - CNC control Grossenbacher AG / Reishauer modell FMS 6 - CNC profiling de ...
used
max. width of grinding wheel: 300 mm diameter / bore of grinding wheel: 60 mm Flange taper: Reishauer each piece 200,-Eur The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: 0 mm gear width: 120 mm max. module: 3 min. module: 1 total power requirement: 20 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m : : : : : : 5 machines in stock, YOM: between 1986 and 1990 Gear Æ, min./max. 55 / 120 mm Gear Æ for shaft-formed parts 80 mm Module (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 ° Helix angle, max. 40 ° Workpiece clamping length 145 - 420 mm Grinding worm Æ 300 - 400 mm Grinding worm width 25 - 40 mm Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm Feed range 0.4 - 4 mm/rev Total electrical load 20 kW - 380 V - 50 Hz Weight 7,500 kg Accessories / Special Features REISHAUE ...
used
Minimal diameter of the gear wheel : 350 mm Maximum diameter of the gear wheel : 280 mm Max. thread diameter : 200 mm Min. thread diameter : 3 mm Max. length : 700 mm
used
Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Max. grinding length: 450 mm Max. clamping length: 1055 mm Max. work piece diameter: 250 mm Thread diameter: min.: 2 mm max: 250 mm Workpiece spindle bore: 45 mm Workpiece weight on centres max.: 200 kg Thread pitch: min.: 0.3 mm max: 100 mm Max. angle pitch +: 40 ° Max. angle pitch -: 40 ° max. module: 10 Grinding wheels: Diameter: min.: 280 mm max: 350 mm Width: min.: 3.5 mm max: 40 mm Bore: 40 mm Grinding-wheel speeds: number (steps): 6 from: 1700 rpm up to: 2540 rpm Work-piece spindle head speed: number (steps): 27 from: 0.4 rpm up to: 160 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.4 kW Total power required: 15 kVA Machine´s weight about: 4700 kg Overall dimensions machine: Length: 3300 mm Width: 1930 mm Height: 1800 mm Various accessories: Coolant syst ...
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
change gear bolt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used grinding spindle with wear marks. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: Reishauer DS / zum läppen weight of the machine ca.: 200 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 460 mm threading length: 900 mm thread pitch: 100 mm total power requirement: 10 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 290 mm -recess recess: Ø 268 mm -Hole circle: Ø 168 mm -Through hole: Ø 70 mm -Weight: 43.5 kg
used
max. wheel diameter: 400 mm gear width: 250 mm max. module: 8 min. module: 0,5 root circle diameter: 10 mm number of teeth: 5 - 999 max.helical angle: +/- 45 ° weight: 12.5 t control: Siemens 840 D Machine is in very good condition, test reports available. CNC Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- Control: --- total power requirement: --- kW weight of the machine ca.: 5,0 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)
used
grinding wheel diameter:400 mm total power requirement:3 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 min. module 0,5 pressure angle 10 - 30 ° grinding worm dia. 270 - 400 mm width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm
used
max. wheel diameter: 400 mm gear width: 300 mm max. module: 8 min. module: 0,3 control: Sinumerik 840 D number of teeth: 5 - 999 pressure angle: 14 - 30 ° helix angle: -45 / +45 ° workpiece weight: max. 300 kg x-axis: 490 mm rapid traverse X-axis: 15 m/min y-axis: 220 mm rapid traverse Y-axis: 5 m/min z-axis: 300 mm rapid traverse Z-axis: 5 m/min grinding wheel diameter: 205 - 300 mm grinding wheel width: max. 125 mm boring diameter: 160 H7 mm number of starts: 1 - 5 weight of the machine ca.: 12,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.
used
RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...
used
Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm
used
Description: Change Gears/Gears: This 32-piece steel change gear set consists of: Gears with the number of teeth from 20s - 149s Approx. Onsite Dimension. (l x w x h): 400 x 250 x 200 mm, weight approx.: 50 kg
new
Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...
new
max. wheel diameter: 400 mm gear width: 200 mm max. module: 10 min. module: 1 profile depth: 25 mm x-axis: 630 mm y-axis: 400 mm z-axis: 190 mm U-axis: 80 mm a- axis: 360 ° b-axis: +/- 30 ° max.helical angle: 30 ° grinding wheel diameter: 250 - 350 mm spindle speeds (infinitely variable): 1500 - 2800 U/min grinding slide feeds: 6000 mm/min center distance betw. workpiece-tool min/max.: pitch max.: 9000 mm pitch min.: 10 mm electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 38 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,8 m horizontal Profil Gear Grinding Machine for Spur and Helical External Gears. Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with: - CNC Control FANUC 0i-MF -- for 6 Controlled Axis (4 simultaneously) - Gear Measuring System - Chip and Sludge Removal System - Pape ...
used
max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...
used
max. wheel diameter: 1500 mm gear width: 550 mm max. module: 25 min. module: 2 workpiece weight max.: 6000 kg max. number of teeth: 432 min. number of teeth: 12 table diameter: 990 mm grinding wheel size: 400 mm total power requirement: 75 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: m With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer Niles Model ZSTZ 1250 Year 1986 Maximum wheel diameter : 1250 mm Module + : 30
used
Manufacturer Gleason Model Pfauter P 200 G Year 1999 Machine is in good condition
used
max. wheel diameter: 1010 mm gear width: 0 mm max. module: min. module: total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radiu ...
used
max. wheel diameter: . mm gear width: . mm max. module: . min. module: Control: total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m specifications Max. Grinding length (mm) 500 Max. Grinding diameter (mm) Ø 300 Speed 5,000 - 25,000 kW 15 Voltage 380V Hertz 50 Including: Max. auto feed 15.000 mm/min Max. feed carriage 21.700 mm /min Angle grinding head 0 - 55 degrees Helical pitch 10 - 90.000 mm Max. positioning movement of grinding head 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine in good technical condition, possibility of testing after agreement. Machine weight 2000kg.
used
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
used
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
used
Max. table load: 8t, diameter table: 2000m, max. wheel diameter wheel: 720mm, pressure angle: 12.5-30°, max. bevel angle: 35°, diameter grinding wheel: 300mm/400m, peripheral speeds: 25 or 35m/s, grinding stroke: 750mm, number of teeth: 12-372, length: 6800mm, width: 5500mm, height: 3800mm, weight: 26t, was modernized in 2000 and equipped with CNC control, with documentation, on-site inspection is possible.