reepex used for sale

Reepack Reeflex 150 Ecoline tray sealer Manufacturer: Reepack srl, Italy Type: ReeFlex 150 Ecoline Year: 2011 Stainless steel Mold: baguette format, 300 mm x 85 mm, 3 times Speed: 6 – 15 / min. Power: 400 v., 50/60Hz, 3-phase Weight: 1000 kg Dimensions: L 4060 mm x W 1300 mm x H 1820 mm

Tray sealer few operating hours with shell storage shell size: 350 x 350 mm Top foil: Max. 420 mm Power 6 to 15 cycles / minute Delivery time: 2..3 weeks

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

Three Roll Calender Manufacturer: Reed 24inch wide x 12inch diam. Right angle drive Double helical gears Hand nips Lunn Safety Gear Holroyd Gearbox Crompton Parkinson Motor Complete with Starter

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Tray sealing machine: speed : up to 17 cycles /min ( sealing) 10 to 12 Cycles/ Min ( with MAP configuration) Reeflex 250 is an automatic tray sealer in-line. Used vacuum traysiler (packer in finished trays) Reepack Reflex. Two matrices (tray size: 170/210 mm, 300/230 mm) depth up to 160 mm. The condition is excellent. Photos before the repair. Price including overhaul. Automatic machine for sealing preformed trays, available with vacuum forming device and M.A.P. system. High productivity and flexibility are provided due to the available additional equipment and the possibility of rapid change of the mold. The stainless steel frame provides a high degree of protection against corrosion and adherence to optimum sanitation and hygiene conditions, works with a programmable PLC to store 15 different programs.

LIQUIDATION of Bell vacuum machine from the ITALIAN manufacturer of high quality REEPACK, model RV400. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel. The machine is ready to plug in and work with. Busch vacuum pump: 63m3. RA 063 F 5R3. Final pressure: 0.5 mbar Vacuum system: per sensor External measurements of the machine: 630 mm x 770 mm x 950 mm. Camera dimensions: 525 mm x 625 mm x 190 mm high. Welding bar measurements: 525 mm x 1. Includes inert gas injection (M.A.P.) Weight: 195 Kg. Voltage: 380-400 V, 3 Ph, 50 Hz, 3.4 A. Vacuum machine, vacuum hood, vacuum packaging machine, vacuum hood machine, meat machinery, packaging machinery. Equipment fully revised, conditioned and guaranteed.

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Reepack automatic traysealer 312201570 It is located in Asturias, Spain.

Packing Line, Packing Machine, Hood Shrink Machine, Hood Shrinker, Film Wrapping Machine, Sealing Tool Sealing Tool, Tray Sealing Machine, Tray Sealer -Manufacturer: Reepack, sealing tool from tray sealing machine Inauen VC999/ TS 1200 N -Type.: 342201270 -Shell size: 270 x 190 mm -Cutting die: see photos for size -Dimensions machine: 540/520/H220 mm -Weight 49 kg

Hazard lights, night signs, flash lights, day and night signs -Reetec: Control for wind turbine hazard lights -Type: W, red slimline THSLW -Dimensions: 210/255/H70 mm -Weight: 3.5 kg

Reepack traysealer, model: 1751VG, serial number: 1013001, year of construction: 2013, 400 V, 3 Ph, 50 Hz, 16 A, dye: (2x) 130 mm x 180 mm, plastic mesh belt, belt width: 400 mm, Busch vacuum pump, type: RA 0100 F503, number: 130005731, year of construction: 2013, total dimensions: 5000 mm x 950 mm x 1830 mm. With pallet with trays.

Product number: 2204J Type: 1751VG Serial number: 1013001 Year of construction: 2013 Capacity: 6 - 15 cycles/min. Tray dimensions: max 350 x 365 mm Air pressure: 6 - 7 Bar Power: 3 x 400V, 50Hz, 10A Dimensions: 5000 x 915 x 1820 mm Weight: 1000 kg Including 10 dyes and pallet spare parts

Hazard lights, night signs, flash lights, day and night signs -Signal lights for: wind turbines -GF lamp: RE-LED 864 (Red) -Housing: aqua signal -Price: per piece -Number: 2 pieces -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Hazard lights, night signs, flash lights, day and night signs -Signal lights for: wind turbines -GF light: RE-LED 865/864 (White/Red) -Housing: aqua signal -Price: per piece -Number: 2 pieces -Dimension: Ø 356/675 mm -Total weight: 17 kg

Lifting and Turning Device for beverage paper roll consists of: Jumbo Reel Lifting and Turning Device for beverage carton paper rolls, your choice: manual (manufacturer BT), with battery electrical lifting (manufacturer Tetra Pak)or with battery electrical lifting and autom. hydr. turning (manufacturer BT)

Cable reel, cable reel, power cable reel, cable reel, workshop reel, cable reel, wall cable reel, workshop cable reel, wall reel -DR Italia: power cable reel -with cable: 7G 1.0 length: 13 m -Dimensions: 340/400/H400 mm -Weight: 15.5 kg

Reel on and off reel, reel GSW SCHWABE Type LHD 50/800 Probe Double unwinding reel, double uncoiler Fabr. No. 5775 Year of construction approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Plant discs 850 mm Start-up rings 850 Center reel shaft to reel foot 980 mm - Reel structure manually rotatable by 180 with latching steps - central spread via rotary lever adjustment - mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg good condition; used

Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel -Cable reel -Drum: Ø 300/160 mm -Weight: 11 kg

Hose reel, hose reel, tank hose reel, wall reel, refueling hose, chemical hose, mineral oil hose, high-pressure hose, tank truck hose -Manufacturer: Gelbring / Tonsing, HD tank hose on reel -Type: NBR-1 DIN EN 1761 / EI 1529 / VG 95955 -Hose length: approx. 240 m -Hose: Ø inside 50 mm (2) outside 66 mm -Reel: hydraulically driven -Dimensions: 1750/1590/H1360 mm -Weight: 780 kg

Double reel, reel, decoiler, motorized reel for sheet metal processing, punching, eccentric press, hydraulic press, automatic punching machine, motor reel, winding reel, decoiler, sheet metal unwinder -Manufacturer: OBRU, reel height adjustable, with drive -Diameter / width: adjustable, see photos -Dimensions: 750/730 / H1130 mm -Weight: 114 kg

Double reel, reel, decoiler, motorized reel for sheet metal processing, punching, eccentric press, hydraulic press, automatic punching machine, motor reel, winding reel, decoiler, sheet metal unwinder -Manufacturer: OBRU, reel height adjustable, with drive -Speed: 17 rpm -Dimensions: 800/700 / H1140 mm -Weight: 125 kg

Double reel, reel, discharge reel, motor reel for sheet metal processing, punching machine, eccentric press, hydraulic press, automatic punching machine, motor reel, winding roll, decoiler, sheet metal unwinder -Manufacturer: Wanzke, reel height adjustable, with drive -Diameter/width: adjustable, see photos -Drive: 0.37 kW -Speed: 9 rpm -Dimensions: 1000/960/H1410 mm -Weight: 208 kg

Fully automatic unwinding reel Remote control console Automatic and manual working mode Fine adjustment of speed Potentiometer Simply synchronized with punching machine Reel motorized, with Central Expansion Reel run both directions, prewaerts and rueckwaerts with loop sensors control Speed from 0.1 to 30 RPM rpm Engine with gearbox Reel max load 1 ton Winder strip width up to 300 mm Inner diameter 250 mm min max. 500 mm Outer diameter max. 1300 mm Power 0.37 KW Dimensions 1,200 mm x 1,200 mm height 1,600 mm with CE certificate in stock 2 essa, 2 shaal and 12 brother general overholt punching machines

Hose reels, hose reels, tank hose reels, wall reels -Spring drum -Hose length: 5 m -Dimensions: 500/400/200 mm -Weight: 16 kg

Spring cable reel, spring-operated cable reel, spring cable reel METOOL PRODUCTS LTD. SC18/1A/A4/FM SC18-1A-A4-FM 4- pole ( pole : 3 + PE ) Outer diameter: Ø 315 mm Inner diameter: Ø 180 mm Drum width: 110 mm Flange: 83 x 83 mm with approx. 4 m connecting cable and approx. 9,, 5 m cable used, tested ! Dimensions: 340 x 320 x 320 mm

Encapsulated automatic cable reel, cable reel, cable reel ELEKTRON BERLIN No. 01204 Triple socket No. 1479, 10/16 A, 250 V AC cable: GMH11YÖ K25 cross-section: 3 x 1,5 mm² Cable length: approx. 8 m Drum diameter: Ø 300 mm nominal power (coiled): .max. 1800 W nominal voltage: max. 250 V AC Primary voltage: 220 V 1AC 1.4 A used, tested ! Dimensions: 350 x 260 x 170 mm

Strapping machine, packaging machine, strapping machine, skin pack machine, pallet wrapper, geared motor with reel -Manufacturer: Nord, gear motor with reel from packaging machine Tiromat Compact M420 -Transmission: Nord 1 S32F F i= 5.40 -Motor: Nord SK1S32F 0-750 rpm / 0-139 rpm -Number: 2x reel unit available / 1x left 1x right -price: per piece -Total dimensions: 520/460/H360 mm each -Weight: 19 kg/pc.

The WH-1512 G reversible reel is an automatic double-sided winding and unwinding reel for metal strips. While the metal strip is being unwound, the interlayer paper is wound up at the same time. The reel is suitable for coils with the following dimensions: - Outer width max. 150mm - Coil outer diameter max. 1200 mm - Spool weight per side must not exceed 150 kg (full spool)

Winding drive, rewind drive D75mm and D150mm, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Winding drive, rewind drive D75mm and D150mm consisting of: 1) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 2) Hypoid gear, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, 3) Winding spigot for reel support, series 3233, D75mm, Spanntec, 4) Attachment adapter for reel support, series 5230, D150mm, Spanntec, 5) Attention: Optionally, we also have the matching motor module SINAMICS S120 6) You are wel ...

Spring cable reel, hose reel, cable drum VAHLE KTN SCH 300/252 H ( KTNSCH300/252H ) VLF 300 ( VLF300 ) Hose length: 25 m Outer diameter: Ø 550 mm Inner diameter: Ø 300 mm Drum width: 190 mm Flange diameter: Ø 138 mm Connection: 3/4 New ! Dimensions: 550 x 290 x 550 mm

Spring cable reel, hose reel, cable drum VAHLE KTN SCH 300/252-H ( KTNSCH300/252-H ) VLF 300 ( VLF300 ) Hose length: 20 mbr /br /VLF 300 ( VLF300 )br /br /hose length: 20 mbr /br /VLF 300 ( VLF300 )br /br /hose length: 20 Outer diameter: Ø 550 mm Inner diameter: Ø 300 mm Drum width: 190 mm Flange diameter: Ø 138 mm connection: 3/4 New ! Dimensions: 550 x 360 x 550 mm

Spring cable reel, hose reel, cable drum VAHLE KTN SCH 300/252 H ( KTNSCH300/252H ) VLF 300 ( VLF300 ) Hose length: 30 m Outer diameter: Ø 550 mm Inner diameter: Ø 300 mm Drum width: 190 mm Flange diameter: Ø 138 mm connection: 3/4 New ! Dimensions: 550 x 290 x 550 mm

Wire reel, willow wire reel, barbed wire winder, wire winder, wire winding machine, Electric fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -the device could with corresponding recording with front loader or Three-point hitch can be used -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Number: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Own weight: 19 kg

Description: Composed of: N°4 reels including one reel of total capacity 1025 meters, two reels of total capacity 250 meters and one reel of total capacity 1000 meters. We do not guarantee the completeness of the reels (assumed capacities) Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 600 mm, weight approx.: 50 kg

For sale: Used parts from spindle mower Agria 9300, also dieselengine Kubota V 1200 Other parts of / for reel mowers available to some types of Jacobsen, Ransomes and Sabo. Also complete spindle mower units, cutting moves, pull mowers, self-propelled mower. - JODAU environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Reelinger machine Manufacturer: Julius Max. width: 1300 mm Max. diameter: 1200 mm

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm

Motor cable reel Manufacturer : Wampfler Type : EB040625-W100.3/40/10-90-HMK8/KN90L4 Free sag, drum on the mobile device Speed 30m/min. m. 50 mtr. Cable 4x16 mm² Condition : New, may have slight scratches/marks, comes from stock. Scope of delivery/information : see the pictures. Internal No.: Werkst. EG R2 P16 Werkst. EG R2 P18 Werkst. EG R1 P06

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm

Two Bihler reels are available, without documentation, an inspection is possible.

Key data: 400

Reel system Sheet width : 100 – 400mm Inner dimension : min. Ø 470mm. – Ø 530mm. Dimensions : Ø 1400mm. Load : 4000kg. Rotary speed d/min : 14 Rotary Speed Controller Right & left rotation ----- Feed system - SERVO Sheet width : 70 – 400mm Sheet thickness : 0.2 – 3mm. Speed : 100m/min. Feed : Ø 80mm. ( 2pcs.)

Reed switch, 4 pieces KÄRCHER 2.880-194 Switch head: Ø 8 mm, length: 85 mm approx. 1.0 m connection cable New ! Dimensions ( packaging ): 235 x 75 x 75 mm

Reel chassis, rolling trolley, trolley, hand-operated YALE HTG1-A load capacity: 1000 kg beam width: 50 - 220 mm eyelet: inner diameter: Ø 30 mm, length: 33 mm chain length: approx. 5.0 m ( single ) New, with documents ! Dimensions ( rolling trolley ): 300 x 260 x 190 mm Dimensions ( packaging ): 320 x 290 x 250 mm

Hose reel for water and compressed air PLANETA L-275 Hose diameter: 3/8 ( 9.5 mm ) Hose length: 15 m Working pressure: 20 bar Housing material: Plastic ( high strength, impact resistant ) New ! with documents ! Dimensions ( packaging ): 390 x 330 x 210 mm

Cable reel BRENNERSTUHL Luminous flux approx. 50 m, 1 earthed sockets

Cable reel luminous flux RED plastic, approx. 40 m, 3G2,50, 3 earthed sockets

Description: Hose reel for compressor pneumatic hose 14 MT, complete with fittings Approx. Onsite Dimension. (l x w x h): 300 x 400 x 300 mm, weight approx.: 5 kg