punching machines 1250 used for sale

Manufacturer: 5 Achs Leimspritzanlage, Type: Superfici, Year: 2000, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 10-100, Working widht max mm: 1300, Einlauband: 3500, Enststaubung: 2 Bürsten mit Ioniesierung, Spraying heads - total: 1, Zuluftfilterdecke: yes, Abdunstrockner mm : 7500, Düesentrockner 1 mm Temperatur: ca. 45, 5 axis machine: yes, Stainless steel design: yes, Spraying stations: 1, Working widht mm: 1500, Feeding speed m/min: 3-5, lichte Durchlaufhöhe mm: 100, Dry exhauster: yes, Transport system paper: yes, Lackierpistolen: 2, Materialförderpumpen: Krautzberger, Spraying heads - total: 1, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Year :2000

Manufacturer: Vitap, Type: Point K2, Year: 2018, Barcode scanner: yes, Machining stations: 1050, Work piece width min-max mm: 1010, Work piece length min-max mm: unendlich, Work piece thickness min-max mm: 50, 3 axis control: yes, Working range X: 270 - unendlich, Working range Y-axis: 185 - 1200, Working range Z: 4 - 50, Vertical drilling station from below: 9, Milling spindles horizontal: 1 vertikal, Power kW 1: 5,0, RPM min-max 1: 12.000 - 24.000, Milling spindles vertical: yes, Horizontal drills-X: 2 + 2, Drill horizontal Y: 1 + 1, Sawing unit: 100 mm, Lochraster: 32, Machining stations: 1050, Year :2018

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Manufacturer: Fraxinus - Desco , Year: 2008, Superordinate control: yes, Cycle performance units/min: 5, Work piece width min-max mm: 155-1070, Min.-max. workpiece length in mm: 482-3000, Min.-max. workpiece height in mm: 18-250, Vorschub der Montage m/min: regelbar, Roboterbeschickung für Pappe: yes, Stacking locations: 3, Ausrichtlineal Montagelinie: yes, Length of wrapping belt mm: 25000, Roboteraufstapelanlage: yes, Stacking locations: 3, Carton at pallet: yes, Stacking patterns possible: yes, Discharge station: 1, Einschleussstation: yes, Packing belts: 1, Automatic carton sealer: yes, Folieneischlagstation : yes, Folienbreite max mm: 1500, Foleinschrumpfanlage: yes, Stacking robot: yes, Stacking locations: 2, Pallet buffer: yes, Automatic pallet wrapper: no, Pallet buffer: yes, Feeding speed adjustable: yes, Feed out conveyor for pallets: yes, Sice - euro-pallet: yes, Belt width m ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

Manufacturer: IMA OBK, Type: OBK, Year: 1996, Premilling: yes, Profile milling: yes, Profil sanding: no, Edgeband thickness max mm: 60, Thickness of coiled edgeband max mm: 1, Panel length min mm: 300, Work piece thickness min mm: 100, Feeding speed max m/min: 5-30, Machine lenght mm: 11000, Pressure zone star: yes, Pressure zone exchange system: 4-fach, Strip magazin: no, Trimming saw: yes, Flush milling: yes, Scraper: yes, Buffing unit: 2 Stück, Glue system granulate/cartridge: granulat, Spraying device: yes, Noise enclosure: yes, Compressed air bar: 6, Maschine kann vorgeführt werden , Year :1996

Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994

Manufacturer: 2 Lakierroboter Yaskawa, Type: ENCM und ERCS, Year: 2005/2007, Control: Yaskawa, Spraying heads - total: 2, Working width mm: 1500, Conveyour system: Transportwagen gesteuert, gesteuerte Achsen: 6, Ex-geschützt: yes, S-Achse Grad [°]: +/- 170, L-Achse Grad [°]: +/-120-65, U-Achse Grad [°]: +/-205-165, R-Achse Grad [°]: +/-190, B-Achse Grad [°]: +/-145, T-Achse Grad [°]: +/-360, Max.Tragkraft kg: 5, Max Drehmoment Nm: 3/8, Stainless steel design: yes, Spraying stations: 2, Colour circuits: 1, Laquer circles: 1, FREE TEXT: beide Anlagen Roboter sind gekoppelt einem Transportsystem für den Tisch, Year :2005/2007

Please see the pictures for the data!

Year of construction 2016

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 38 mm -Tool: Ø 200 x 30-60 mm -Dimensions: 640/150/H250 mm -Weight: 52 kg

GeneralTraveling column machine; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools50 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 12,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12Clamping System HSK-A 100Spindle taper HSK-A 100Speed range 20 -12000 rpmTorque (40% DC) 288 NmTorque (100% DC) 187 NmDrive power (40% DC) 44 kWDrive power (100%  ...

HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...

PONAR TARNÓW RUP-28 universal grinding machine was built in 1979 in Poland by the Fabryka Obrabiarek Specjalizowanych Ponar-Tarnów. The machine is used for precise grinding of both external and internal cylindrical surfaces in order to achieve the appropriate class of surface roughness and the desired shape. The grinding process is performed on a large work table by means of a grinding wheel that reaches a speed of 45 m/s. The machine’s design has been developed to ensure the highest stability and accuracy of the performed operations during many years of intensive use. All this makes the offered RUP 28 cylindrical and internal grinding machine an excellent choice for production plants, tool shops or workshops specialised in the reconditioning of machine parts. The total weight of the machine is 2600 kg. Technical specifications of the PONAR TARNÓW RUP-28 cylindrical grinding mach ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWClamping System HSK-A 63Spindle taper HSK-A 63Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmDrive power (40% DC) 35 kWNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 30 pockets HSK-A63Tool magaz ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Cross420 mmLongitudinal700 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmDrive power (40% DC) 8,5 kWToolchangertoolchangerType of magazine WheelNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40b ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Working area 1Longitudinal450 mmCross580 mmVertical460 mmSpecial equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

Leftover bread chopper Hommel Rotormat 2000 Super "the universal shredder" Stainless steel version Powerful Connection 400V, 16A-CEE plug Dimensions: 690 x 650 x 1550mm, WxDxH Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: another sieve Delivery service Maintenance contract

Stroke machine Rego SM 2000 Stirring machine with automatic timer 1 whisk, 1 whisk 1 32 litre stainless steel kettle Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Residual bread chopper Bio 2 for all light/dark leftover breads etc. "the organic universal shredder" Robust technology Connection 400V, 16A-CEE plug Used machine

Thermo Quick Duo temperature control unit with 2 removable bowls Control by thermostat Connection: 230 V Used device cleaned

Spiral mixer Kemper SPL 75 Manual control 2 gears, 2 clocks Stainless steel boiler and spiral Connection 400V, 32A-CEE plug Used machine

Anchor Fomko F 32 LH 2 working functions: 1 x stirring / 1 x beating 1 whisk, 1 whisk 1 32 litre stainless steel kettle Powerful and robust technology Connection 400V, 16A-CEE plug Used machine

Leftover bread chopper Ismar Junior 4 for all light/dark leftover breads etc. "the universal shredder" simple, robust technology Connection 400V, 16A-CEE plug Used device

Spiral mixer Diosna SP 80 F/TU 2 time timers, 2 gears simple, robust technology Connection: 400 V Used machine

Weigher Scheurer SV 140 E Easy weight adjustment with central lubrication Good robust technology Discharge belt height adjustable long Connection 400V, 16A-CEE plug Used machine

Sheet metal plastering machine Jeros 5015/828 for 2-edge trays Stainless steel version with lubrication Connection 400V, 16A-CEE plug Used machine

Spiral mixer Kemper SPL 75 Manual control 2 gears, 2 clocks Flour dust hood Very robust technology Connection 400V, 32A-CEE plug Used machine

Spiral mixer Oase SPK 50 Manual control 2 gears, 2 clocks Flour dust hood Stainless steel boiler and spiral Connection 400V, 16A-CEE plug Used machine

Spiral mixer Diosna/Oase SP24/SPK15 2 timers & 2 speeds Stainless steel boiler and spiral Machine mobile Connection 400V, 16A-CEE plug Used machine

Doja-Tec glazing line with speed controller Stainless steel version plating products Connection 400V, 16 A CEE plug Used device

Key data: 800 mm, 650 , 650

We have various spare parts in stock for the following machine. Please inquire! DMU 80E Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410

Key data: 4200 kN, 1090 g/PS, 70 mm

Demag Ergotech 420/800 2300 with embossing function and Robot Wittmann DR 633/CNC 6-316 Prices are at: inventar-verkauf.de/id/alesco Details: Clamping force: 4200 KN Handlebar width: 800 x 710 mm Mold opening: 710 mm Control Ergocontrol NC 4 Connected load: 68KW Total dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Robot Wittmann DR 633/CNC 6 - 316 (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-fold core pull 2 I/O Embossing function retrofitted 2 x Injection Unit: Injection Unit 1 Weft volume: 891 cm Weft weight: 800gr (polystyrene) Screw diameter 60mm Injection pressure 2420 bar Injection Unit 2 Weft volume: 1212 cm Weft weight: 1090gr (polystyrene) Screw diameter 70 mm Injection pressure 1877 bar WITHOUT COOKING VACUUM CLEANER and CLAMPING DEVICE.

Key data: 1100 mm, 3 , 150 mm

Wide belt sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, year 1991 TECHNICAL DATA: Working width max. 1,100 mm Working height max. 150 mm Abrasive belt width 1,110 mm Sanding belt length 1,900 mm 1. Grinding unit Profiled steel contact roller D=200 mm Motor power 15 KW 2. Grinding unit Combined contact rolling - grinding shoe unit Profiled rubberized contact roller, D=150 mm Air cushion sanding shoe Motor power 11 kW 3. Grinding unit Grinding shoe unit, electronically controlled link pressure beam Element width 30 mm Synchronization / counter-rotation Infinitely variable sanding belt speed (frequency converter) Digital display of the sanding belt speed Motor power 11 kW - Transport carpet with stepless belt feed 3 - 15 m/min. - Vacuum table / vacuum clamping device 11 kW - Rotating cleaning brush 0.75 kW - Digital display of the grinding height - ...

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

Klinger bottle washing machine also for swing-top bottles. Machine can be planned and set up by us. We can also supply additional conveyor technology

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

Machine is in very good condition and swing-top bottles can also be driven 0.5l Bracket 0.5l Euro 0.33l Longleg

Krones bottle washer built in 2001 676-039 6000 bottles/h 0.2l-1.0l bottles Machine will be available in December 2026

1 Qty.1 Second-hand roll grinding machine GRINDER241001-1 Mfc.: Herkules Siegen, min. roll dia.: 250 mm, max. roll dia.: 900 mm, table length: 3,500 mm weight: 20 Tonnes

Key data: 300 mm

2 Qty.1 Second-hand roll grinding machine GRINDER241001-2 Mfc.: Zocca Italy, Type: RCL 2000/6, min. roll dia.: 100 mm, max. roll dia.: 300 mm, table length: 2,000 mm, weight: 10 Tonnes

Key data: 762 mm

4 Qty.1 Second-hand roll grinding machine GRINDER241001-3 Mfc.: Farrell, Type: 409, min. roll dia.: 0 mm, max. roll dia.: 762 mm, table length: 2,514 mm, weight: 15 Tonnes

Key data: 6500 kN, 80 mm

Clamping force: 650t Year of construction: 2024 Injection Unit .../4630 Screw diameter 80 mm Spec. Spray pressure 2090 bar Injection volume 2212 cc Hydr. Drive power 113 kW L/D Screw Ratio 22 Clamping Unit 6500/... Clamping force 650 t Lights spar spacing 1040 x 910 mm Ejector force 110 kN Tool installation height 400 mm Opening way 950 mm Max. panel spacing 1350 mm Ejector path 250 mm Weight 27000 kg Year of construction 2024 Control type KEBA 2985 Clamping unit Two-plate technology – hydraulic clamping force Fast tool movement due to two diagonal cylinders Tool protection function Linear guide for BWAP (MAIII PLUS, MA-F) Set of spray nozzles Closing and opening of the mold (max. 5 stages, min. 3 stages) Tool height limitation via limit sensor Clamping plates according to Euromap standard Ejector reset function Display of ejector p ...