We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
- technically efficient, ready to work - after full service - profile supports - lowered thrust unit ...
General SKU300U589 LocationBarneveld MakeKorsch TypeEK 0 No.K0000094 Year of construction2001 Main Features Tablet Diameter20 mm Specified Features - Single stroke tablet press MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L), Tool steel 1.2721 Single stroke tablet presscheck Tablet diametermax. 20 mm Filling depth0-20 mm Die diameter20 mm With filling shoecheck With hoppercheck Capacitymax. 3600 st. With motor0,55 kW, 220/380Volt With variable speed drive10-60 rpm Information Mounted on frameStainless steel cabinet With switchcheck With switchgearcheck Weight180 kg CEcheck Floorspace0,74x0,46 m Total height1,90m Extra Specifications- with vari ...
General SKU300U588 LocationBarneveld MakeKorsch TypeXL 100-8-EUD No.K1510018 Year of construction2001 Main Features Tablet Diameter25 mm Material Specified Features - Rotating tablet press Rotating tablet presscheck Number of stations:1 With punching dies8-10-12 With key on punching diescheck Tablet sizes13-16-25 mm Filling depth0-6/6 mm: 4-10/10 mm: 10-16/16 mm With motorcheck (2,2kW, 220-240/380-415 Volt, 1400 rpm) With frequency controllercheck (20-120, 20-120, 20-60 rpm) Capacity29.000-72.000-86.400 pc/h With hoppercheck Information Mounted on framecheck With switchcheck With switchgearcheck Weight960 kg CEcheck Floorspace1,6x0,7 m Total height2 mRotating tab ...
PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM ...
Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and ...
Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland ...
pressure: 100 t distance between columns: 1500 mm stroke: 380 mm working feed: 2,47 mm/sec : 700 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 1740 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 1396 mm total power requirement: 2,2 kW weight of the machine ca.: 2060 kg dimensions of the machine ca.: 1,74 x 2,07 x 2,04 m This 100 ton straightening press has a manually movable portal and is exclusively made in the Netherlands. Thanks to the movable portal and cylinder you can easily reach every point of the ‘to be pressed’ surface. The design of this portal press makes it possible to place heavy material on the large ...
pressure: 300 t distance between columns: 2560 mm stroke: 400 mm working feed: 3,8 mm/sec piston stroke: 300 mm : 700 mm adjustment of press crosshead: 2000 mm slide adjustment -horizontal: 3000 mm tank capacity: min 30 l feed speeds: 9 mm/min pressing speed: 2 mm/sec return speed: 15 mm/sec total power requirement: 10 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 3,5 x 3,05 x 2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t distance between columns: 1100 mm stroke: 380 mm working feed: 2,47 mm/sec : 950 adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 996 mm total power requirement: 2,2 kW weight of the machine ca.: 1,65 t dimensions of the machine ca.: 1,1 x 0,7 x 0,72 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they ...
pressure: 10 t stroke: 30 mm table surface area: 105 x 366 mm distance between columns: 366 mm column daylight: 70 mm : 32 mm total power requirement: - kW weight of the machine ca.: 55 kg dimensions of the machine ca.: 500 x 700 x 1030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.