With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providi ...

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful ar ...

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by  ...

This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of elec ...

With PRO 500 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with PRO series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overha ...

- X: 4050 mm - Y: 2050 mm - Z: 250 mm - Clamping area: 4200 x 2150 mm - Speed range: 12 kW - 36,000 rpm - Spindle holder: HSK E40 - Control: MDSI 6.0 on XP computer - Tool changer: 10-fold - Tool diameter max.: 13 mm - Switching hours: 23589 h - Spindle On: 7736 h - Total power: 15 kW - Machine weight: 4900 kg - Space requirement (W x D x H): 6.7 x 3.12 x 2.6 m Details Tool length scanning, spindle type: Reckerth type MSPF-125/36-12/FBLP/HSK-F40, frequency converter company Berges type SWPK 400150 H12, vacuum pump company Busch type RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: company Depureco type T22/100, cooling pump: company Chilly 25-5 Accessories overhauled repla ...

Catalog No. 6832 TECHNICAL DATA piston cylinders 5 pcs: - 3 vertical - 2 horizontal - max length of glued elements 3630mm - max width of glued elements 2270mm - engine power 0.75 kW - hydraulic piston cylinders - dimensions length/width/height 4450x880x2880mm - weight about 1000 kg ADVANTAGES – German production – unpainted - a hydraulic press – used press, very good condition Net price: PLN 13900 Net price: EUR 2989 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)