We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 831)
used
M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller
used
Max. size= 92 x 92 cm, Availability= 042024, Equipment: air table chromed 2 resopal side tables with air 1 spare knifes option sheet jogger R-2 - year 2010 pile lift: LW 450-2 - year 2018LOT Loaded in truck or container
used
Duplo PFi Blade B2+ Year of construction: 2021/2022 Digital cutting table - perfect solution for flatbed cutting, creasing or perforating and drawing. Ideal for digital printing and smaller offset print runs. -Technical data and further information see Appendix - Condition like NEW At call!
used
Max. size= 137 x 85 cm, Availability= 032023, Platform internal dimensions 850 x 1370 mm max. opening 134.5 cm minimum opening 62 cm Load capacity 1000kg Dimensions L 1500 x W 1500 x H 1600 mmLOT Loaded in truck or container
used
M. No.: 6251389 Format (cm): 58 Equipment / Additional information: 1xreserve knife
used
max. paper size: 90 x 90 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cardboard scissors Biagosch & Brandau Manufacturer Biagosch & Brandau, Hamburg Cutting width: 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With pull-out tray for clippings
used
max. paper size: 30x21 cmserial no.: 1888 voltage: 400 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine No. ST139K-53845, printing capacity 12 t, max. 60 mm stroke, table approx. 920 x 470 mm, stoessel approx. 560 x 350 mm, right exit switch disassembled, non-functional
used
Size: 450 mmTechnical details: Power: 220 VoltNet Weight: 145 kgMeasurements: 670 x 780 x 1120 mmEquipments:adjustable saddle for precise Insertion depth 450 mmcutting line lighting DigitallCutting height 40 mm Cutting length 450 mmElectric blade controladjustment Automatic pressure bar Precision
used
Cutting length 76 cm, see also pictures1 knife set extraContinue:1 cutting knife KLINGELNBERG / IKS 1390 x 160 x 14 mm
used
Size: 610 mmTechnical details: Power: 380 V 50 Hz 2.2 KWEquipments:Cutting speed: 3.1 sec / cycle or 19 rpmwidth: max. 610 mmCutting length: max. 610 mmJob memory: 256 Cutting height max. 100 mm
used
used
Equipments:Machine dimensions: W: 850 mm, D: 560 mm, H: 780 - 950 mmTape dimensions: 5-13 mmBelt tension: 8-45 kg/80-450NBelt tension infinitely variable
used
Demo machine, like new !
used
Size: 165 x 1150 mmEquipments:Large side tablesdisplaySafety cellsAir tables left, center and right spareknivesprogram
used
Polar 115 N+, Year 2019 Touchscreen Program Airtable Airtable left Airtable right Polar Jogger RA-4 Year 2019 Polar Stacklift LW-1200-4 Year 2019 Etc. Available: at short term
used
Size: 73x 115 cmEquipments:lifting capacity 650 kgWeight 450 kg Stroke height 1.000 mmPlatform width 1.150 mm Platform depth 790 mm
used
Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars
used
Size: 1150 mmEquipments:3 spare knifesair table
used
Baumann pile turner BSW3-1000 for stationary use Year 1995 manual rotation The pile turner can only rotate. A repair is necessary for the ventilation and jogger functions. format: 750 x 1100 mm Maximum load: 10,000 N Minimum opening width: 600 mm Opening width max.: 1,390 mm
used
Size: 1020 mmEquipments:with PC control Unicoused shee cutter Machine speed max 220m / min with register controlCalender width 1020 mmType: Micromaticpaper weight : max. 65-120 gram PC and cutting edge control were replace in 2012cutting accuracy: +/- 0,3 mm Embossing unit year 2005
used
Polar 115 EMC monitor Year of construction: 1992 EMC Version, Monitor Autotrim, Air Table, 2x Small Side Table + 1 Large Side Table, Spare Knife, etc. At call!
used
Size: 580 mmEquipments:Machines No 17003Hydraulic pressprogram2 spare knivesknife changing tool
used
Air table 2 side tables Photo cells Program Electrical retrofit in TVC (2005)
used
Reference Num.: 4077Brand: PolarType: 92 EMCConstruction year: 1985Available: directlyStatus: Not in productionLocation: DeutschlandCutting Size: 920 mmEquipment:- Lufttisch- Ablagetisch links + rechts
used
max. format 76.50 x 109 cm Year of construction 2001 Automatic vibrating machine Vibrator with spreading roller Air table Flap stop right and left Delivery date: immediately from stock Price on request. We deliver and install worldwide!
used
Reference Num.: 3988Brand: Tr?nkleinType: SM 80 LAvailable: directlyStatus: Not in productionLocation: DeutschlandCutting Size: 800 mm
used
ED - Program Control Monitor color Side tables with air Polar Mohr R 2 vibrator Polar Mohr LW 450 - 1 Replacement blades
used
Reference Num.: 3483Brand: PerfectaType: SEY 92Construction year: 1978Available: directlyStatus: In productionLocation: DeutschlandCutting Size: 920 mmTotal weight: kg 1,800 / lbs 3,968Equipment:- Lichtschranke- Seitentische- Lufttisch- Ersatzmesser