We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 842)
used
The Vierwerke Rapida RDC 106 rotary die-cutter can be configured in different variants to carry out different processes – punching, creasing, perforating, embossing Format max. 740 x 1060 mm Format min. 340 x 480 mm Material thickness from 0.03 to 0.6 mm (grammage 60-450 g/m2) The maximum mechanical capacity is 15,000 sheets/h. Equipment: • Magnetic cylinder in each punching unit to which the dies are fixed • Drivetronic SIS and a camera system to control the sheet guidance in the feeder and in the delivery. • Automatic punch pressure adjustment accuracy of 1 μm, separated for each side • Fast, tool-free change of dies - "Click&Cut" system, set-up times – up to 5 minutes for repeat jobs. • Dynamic arch brake and anti-static system
used
max. plate width: 80 cmstamp width: 425 mmserial no.: 174 plate punch autoplateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Width 68 cm Year of construction 2006 Lifting Punching Machine Computer control with monitor Touch screen Price on request. We deliver and install worldwide!
used
Size: A4
used
1 LABEL DIE CUTTING MACHINE PMC MODEL F -Year of manufacture 1990 -Four-sided guiding system jogs and holds the stacks on all four sides during the die cutting operation for precise die cutting. -Full control of stacks through feeding, guiding and die cutting eliminates manual jogging. -Convenient adjustment of guides and die with clear view of die register on labels speeds set-up and reduces waste. -Labels are safely loaded outside die cutting area. -Typical uses: labels, note pads, credit cards, identification tags, postal cards, game cards, 3-way trim, round cornering. -Materials: paper, plastic, vinyl, Mylar, paperboard Specifications Model F: Maximum Pre-cut Size 184mm x 184mm(7.25” x 7.25”) Minimum Pre-cut Size 32mm x 32mm(1.25” x 1.25”) Maximum Die Cut Size 178mm x 178mm(7” x 7”) Minimum Die Cut Size 25mm x 25mm(1” x 1”) Recommended Tri ...
used
Size: 730 x 1040 mmEquipments:Thickness of material: 0,1 - 2 mmDie-cutting precision: ±0.1 mmMax. speed: 7.500 sheets / hourMax. feeding pile height: 1280 mmMax. pressure: 300 Tons
used
Kama DigitalCut 58 automatic punching machine with hot foil stamping The machine has faults. Year of manufacture 2014 Art.Nr. PS5992
used
Size: 500 x 750 mmEquipments:Max. pressure: 200 TonsMax. speed: 10.000 sheets / hourThickness of corrugated paper: 80 g / m²Heating temperature: 0 - 199°CHeating zone: 10Max. feeding pile height: 1280 mmDie-cutting precision: ±0.1 mm
used
DIE CUTTER OMCSA MARTIA MODEL F -Years 1980 -Hand fed die cutter max paper size 120x83 cms. -Internal die cutting size 117x77 cms. -Mechanical clutch, new motor -Two frames, plates and accessories -In production, available in June
used
Size: A4
used
DIE CUTTER HEIDELBERG GT -Max paper size 32x46 cms. -Complete with ink unit and rollers -Two frames, plates and accessories -In production, available immediately
used
Working width: 520mm, speed: 150m/min, unwind diameter: 1200mm, number of stations: 3, three of which can be used as die-cutting stations and two as printing stations, with web tension control, splice table, side edge control E&L, insetter, hot air drying, UV-drying, water-cooled impression cylinder, cooling unit for water cooling, turning cross, grid take-off, matrix rewind, grid take-up, draw station with cross cutting and integrated slitting station, single sheet delivery, high pile delivery, printing unit infeed and exhaust fan for ozone, available from December 2023.
used
WUPA PS 4.1 year 1973 - 2003 refurbished size 800 – 1,120 mm Min. size 360 – 500 mm Min. grip 14 mm weights 100 – 1,000 g/m2 Thickness max. 3 mm pressure 240 t Speed max. 4,000 sheets/h Stripping
used
Max. label dimensions: 2x5.5 inch, max. printing speed: 152/min, weight: 150kg, operational hours counter: 573h.
used
Platen press / Diecutter - clamp shell die cutter Make Crosland Model A2 Year 1960 ? Max size 46 x 67 mm Details 2 chases Available direct
used
There are two Domino A400 available, were not used for eight years, with ten printing heads.
used
Max paper size : 57 x 82 cm
used
Speed: 3-90m/min, with documentation.
used
Equipped with : FFU-4055 flat feeder unit RD-4055 rotary die cutter SPC-4055 separator Specifications : Original sheet size : 400x550 – 200x275 mm Final sheet size : 376x526 – 50x80 mm (with separator) Pile height : 500 mm Grams : 127,9 - 400 g/m² – cutting max 0.5 mm – creasing max : 0.4 mm Speed : 6000 c/h
used
There are 21 identical label printer available.
used
used
Bobst SP 142 ER Year 1981 Max.Size: 1420x1020mm Min.Size: 700500mm Max Speed: 6000sh/h Max. cutting force: 600T center line Without blanking – only separating possible.
used
Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard ...
used
Enko ES 1800 ST, Year: 2009, TECHNICAL SPECIFICATION, Suitable for the following materials, Solid board up to 300 g/m², Corrugated and laminated corrugated 0.5 - 12 mm, Cabability specifications, Sheet size …………………………………………………………… …………………… max. 1800 x 1300 mm, min. 800 x 700 mm, Cutting pressure max. (450 t) 4.5, Maximum number of strokes max. 3000 s/h, Dimensions and Weights, Length of machine approx. 6300 mm, Width of machine approx. 3200 mm, Height of machine approx. 2150 mm, Weight of machine aprox. 24 t, Pile height, Feeder max 1200 mm, Delivery max. 1160 mm, Technical Data, Gripper edge margin, adjustable from 10 - 18 mm, Cutting knife height 23.8 mm, Wood front edge 27 mm, Electrical connected load 48 KW, Electrical supply 3 Ph, 400 B.C, 50 Hz, Compressed air required 6 bar (kg/m²)
used
max. format 26 x 38 cm Built in 1980 Price on request. We deliver and install worldwide!
used
Heidelberger Dymatrix 105 CS, Baujahr: 2005, min. Format: 350 x 400 mm,, max. Format: 740 x 1050 mm,, max. Stanzfläche: 740 x 1050 mm,, max. Materialstärke: 2000 g/m2 (Wellpappe bis 4 mm),, Funktionen: Stanzen, Rillen, Perforieren, Prägen, Ausbrechen, Gesamtstunden: 4.765 Stunden, Gesamthübe: 15.890.209
used
Max size 330 x 460 mm Details Dedicated diecutter video available
used
Bobst SP 142 E year: 1978 Max speed: 6500 sh/h Max Size: 1020x1420mm Minimum Size: 500x700mm
used
Max size 260 x 380 mm Details with hot foil attachment with foil pull and heating element Available direct
used
ENKO Year: 2014 Model: EA 2200 STFT Technical Specification of Standard Machine Suitable for the following materials: Solid Board - up to 300gsm Automatic Top Feeder - up to 500 g/m² Corrugated and laminated Corrugated - 0.5 - 12mm Cabability specifications Sheet size: max. 2200 x 1700 mm min. 700s 500mm Cutting pressure: max. 440t Max. number of strokes: max. 2200 s/h Dimensions and Weights Length of machine: approx. 9400mm Width of machine without platform : approx. 3285mm Height of machine: approx. 2815mm Weight of machine: approx. 45t Pile height Delivery with 300mm elevation max.1600mm TechnicalData Gripper edge margin, adjustable from 10 - 18 mm Cutting knife height: 23.8 mm, Year: 2014, model: EA 2200 STFT, Cutting pressure: max. 440t