We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 843)
used
Fully Automated Thermal Arc Laminating Machine Feeder/Laminator/Separator/Destacker Format 72x106 Max 40 m/min Few operating hourscan be viewed and tried out on site
used
connection value: 380/400 Voltconnection frequency: 50 HzYear: 1984/1990 Year of construction 1984 / 1990- Vacuum feeder- Laminating station 12.3024/1- Press belt 1100 12.302431The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Laminating machine GMP Protopic 520 Art.Nr. PS6071
used
Laminiermaschine / Laminator GMP Eurolam IDH 540IIIYear 2015 - Serial-No. CJ00340K Bogengroesse / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstaerke / Substrate Thickness 120-350g/㎡ Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150℃ Power Consumption 12kWDie Maschine verfuegt ueber eine Induktionsheizung, pneumatischen Zylinder-Andruck und eine professionelle PID-Temperaturkontrolle. Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nuernberg - Can be test
used
540 x 950 mm Stack feeder Bow trowel at the jetty Cellophanier System SPOT Lamination Machines control 2 reel seats Box display
used
UV-Beschichtungsmaschine - UV-Coating machine Billhoefer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
AUTOMATIC LAMINATOR B&F MECCANICA DRY -Year 2004, High pile -Min paper thickness 110 grms/Sqm- Max 350/400 grms/Sqm -Max mechanical speed: 100 m/min -Min. format sheet: 300 mm x 280 mm -Max. format sheet: 1030 mm x 1400 mm -Max roll diameter : 400 mms. -Electric power machine: 24 kW -Compressed air: 6 bar -Automatic MABEG feeder, Suction feeder table -Diathermic oil-heated calander with MTA autonomous thermal unit -Automatic sheet separator -Automatic stacker in delivery -Complete italian made, In production, available in May
used
Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nuernberg - Can be test
used
Laminator GMP PROTOPIC PLUS 520
used
UV-Beschichtungsmaschine - UV-Coating machine Billhoefer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-UV-Beschichtungsmaschine - UV-Coating machine Billhoefer CPUV-
used
Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm Paper 100-400 GM2 Solid Board max. 350 g corrugated board max. 7 mm in production good condition
used
Rollen-Laminiergeraet - Roll Laminator GBC Aquila 65Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiss-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgsOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
new
Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...
used
Rollen-Laminiergeraet - Roll Laminator GBC Ultima 65Year 2018 - Serial-No. PGG0734 Formatbreite / Size width max. 650mm Heiss-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 685mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 889 x 355 x 533mm Weight 62.4Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Laminator - paper overboard Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery delivery on a table Condition can be purchased `as-is`or refurbished on most parts (ask details) Available Direct or very soon
used
Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110Year 2009 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hourTop Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”)Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgsOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on ...
used
PME inline embossing station for integration into an existing laminating line (coarse linen): - Rubber counterpressure roller (diameter: 250mm) - A water-heated embossing roller (diameter: 254mm) - Web tension control with load cell - Pneumatic adjustment of the counterpressure roller - Pitching pressure in the pinch gap 100kN - Main drive with 5.5 KW - Maximum mech. Speed: 60m/min. - Maximum working width: 800mm - Connected load: approx. 30KW - Power consumption: approx. 20KW - Compressed air requirement: approx. 2.5 Nm³/h at 6 bar - Easy to change the embossing roller - Year of construction 2013
used
used
Spare parts Foliant Taurus 530 SF YOC 2011; Display, electronic components, cylinders, compressor Becker DT 4.16; Compressor T4.25 DSK. Spare parts for Foliant Taurus 530 SF year 2011; display; electronic parts; cylinders; compressor Becker DT 4.16 and T4.25 DSK.
used
STANDARD-EQUIPPED
used
Hot Laminating Machine , Max. Width Movement up to 50 C 1110 mm Procedure up to 125 C 1059mm Max. material diameter Unwinding 100 mm Rewind silicone paper 150 mm Max. plate thickness 38 mm Inner diameter roller sleeves 76.2 mm Cleaned and tested
used
Machine was hardly used!
used
Laminator Neschen K 1100 N , top condition , up to 45 mm throughput height
used
STANDARD-EQUIPPED
used
Laminator - paper over board Make Tùnkers Model S-1100 Year ///// Workingwidth 1100 mm As standard laminator Automatic feeder - register - full surface gluing - manual feeder into automatic lamination station - pressing belt - delivery on table As spot label gluer Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt - pressing belt - delivery on table Both options ? Okay ! Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt OR manual feeder into automatic lamination station - pressing belt - delivery on table Delivery delivery on a table Condition example machine sold throughly refurbished by us almost consessionless - this machine is eventually obtainable from the USA - all new pneumatic - all new shafts for the pressing station - all bearings replaced - all new belts - ...
used
STANDARD-EQUIPPED
used
Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...
used
used
Laminator Peak PP-450 HR; good condition; cleaned and tested; Working width 450mm; .max. Strength 350mic.; temperature range 100-160 C'; Speed 650mm/min.; Table unit. Laminating machine Peak PP-450 HR; good condition; cleaned and checked; working width 450mm; max.thikness 350mic.; temperature 100-160C'; Speed 650mm/min.; table top machine.
used