power generators 3 used for sale

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2016-1BB42 -Number: 2x switches available -Price: per piece -Dimensions: 60/45/H75 mm -Weight: 0.3 kg/pc.

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm -Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2026-1BB40 -Number: 11 switches available -Price: per piece -Dimensions: 85/45/H105 mm -Weight: 0.6 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2026-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RH2131-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 60/45/H120 mm -Weight: 0.3 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2027-1BB44 / 3RH2911-1HA11 -Number: 12 switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RH2131-1KB40 -Number: 9 switches available -Price: per piece -Dimensions: 60/45/H105 mm -Weight: 0.3 kg/pc.

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2017-1BB42 -Number: 3x switches available -Price: per piece -Dimensions: 60/45/H75 mm -Weight: 0.3 kg/pc.

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Siemens / Moeller, Motor protection overload relay -Siemens. Type 3TF2801-0AP0 -Moeller: Type ZE-6 -Quantity: 1 available -Dimensions: 95/45/H75 mm -Weight: 0.3 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Siemens / Moeller, Motor protection -Siemens. Type 3TF2801-0AP0 -Moeller: Type ZE-1.6 -Quantity: 1 available -Dimensions: 95/45/H75 mm -Weight: 0.3 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Siemens, Sirius 3R motor protection overload relay -Type: 3RU1116-1GB0 -Auxiliary switch: 3ZX1012-0RH11-1AA1 -Quantity: 1 available -Dimensions: 120/45/H70 mm -Weight: 0.3 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Siemens, fuse switch disconnector 160 A -Type: 3NP407 -Quantity: 1x load break switch available -Dimensions: 170/110/H80 mm -Weight: 0.7 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Siemens, fuse switch disconnector 250 A -Type: 3NP52 30-0CA0 -Quantity: 1x load break switch available -Dimensions: 265/205/H190 mm -Weight: 4.1 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Siemens, fuse switch disconnector 160 A, unused, original packaging -Type: 3NP5060-0CA00 -Quantity: 1x load break switch available -Dimensions: 200/140/H100 mm -Weight: 1.6 kg

Auxiliary circuit breaker, miniature circuit breaker, fuse, circuit breaker, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector -Manufacturer: Rittal, NH 00 load break switch 160 A -Type: SV 3401 -Number: 2x load break switches available -Price: per piece -Dimensions: 230/115/H140 mm -Weight: 1.0 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 40 mm -Stroke: 200 mm -Hole: Ø50 mm -Pitch spacing: retracted 725 mm -Dimensions: 850/130/187 mm -Weight: 32.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 50 mm -Stroke: 220 mm -Hole: Ø50 mm -Pitch spacing: retracted 555 mm -Dimensions: 675/140/196 mm -Weight: 37.3 kg

Load break switches, terminal blocks, load disconnectors, fuse load disconnectors, control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: Rittal, OM adapter -Type: SV 9340.370 -Number: 2x adapters available -Price: per piece -Dimensions: 65/45/H210 mm -Weight: 0.2 kg/piece

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Siemens, fuse switch disconnector 160 A, unused, original packaging -Type: 3NP4085-1CF00 -Number: 2x load break switches available -Price: per piece -Cardboard dimensions: 200/160/H165 mm -Weight: 1.7 kg/piece

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Siemens, fuse switch disconnector 250 A, unused, original packaging -Type: 3NP4276-1CG01 -Number: 2x load break switches available -Price: per piece -Cardboard dimensions: 250/180/H160 mm -Weight: 4.0 kg/piece

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Carbon electrode package of 50 pieces -Type: Carbonair 10 x 305 -Identification number: W 000 010 446 -Quantity: 9 packages available -Price: per package -Transport dimensions: 320/105/H55 mm -Weight: 2.1 kg/package

Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 8000 kg -Load cell: 4x Tedea-Huntleigh 2000 kg -Quantity: 3 pieces available Price: per piece -Dimensions: 2500/1250/H130 mm -Empty weight: 472 kg/unit

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower radial fan, double version without drive -Fan wheel: 2x Ø 400 x 380 mm -Drive shaft: Ø 30 mm, V-belt pulley 2-groove Ø 231 mm see photos -Outlet: 470 x 275 mm -Dimensions: 1400/660/H615 mm -Weight: 47 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt, transport belt, belt conveyor from packaging machine -Speed: 21 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Transport dimensions: 780/640/H620 mm -Weight: 36 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, cardboard roll carrier, transport roller, carrying roller -Transport trolley: with cutting device -Roll: Ø 327 x 1800 mm rubberized -Shaft: Ø 50 x 415 mm -Drive shaft/mount: Dimensions see photos -Dimensions: 2355/520/H327 mm -Weight: 286 kg/unit

Pneumatic cylinders -Stroke travel: 350 mm -Piston diameter: 80 mm -Piston rod: 20 mm -Connection: 16 x 1.5 mm -Total length when retracted: 480 mm -Total length extended: 830 mm -Air inlet and outlet: adjustable -Quantity: 7 pieces available

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table -Model: AWH 355 -can be opened on one side -without hydraulic unit -with hydraulic valves -without control -controlled via cam switches -supported by clamping brackets for heavy machining -Clamping surface: Ø 350 mm -Peak height: 350 mm -braked: hydraulically -driven: hydraulically -Hydraulic motor speed: 10-1500 rpm -Swallowing volume: 20 cm³/rev -Dimensions: 680/360/H620 mm -Empty weight: 290 kg

Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 275-300 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Adjustable dimensions -Hand protection -Key -Quantity: other sizes also available -Weight: 1.5 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: 12 l/min -Self-priming: up to 1.5 m (when dry) Liquid temperatures: 7 - 54 degrees -Pressure: 1 bar during continuous operation -Amperes: 2 A -Connection: 24 Volt DC Quantity: 1 piece available -Dimensions: 220/120/H160 mm -Weight: 2.7 kg

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2600 mm stroke of upper beam: 265 mm throat: 450 mm dayligth: 530 mm working feed: 10,0 mm/sec ajustment speed: 160 mm/sec return speed: 100 mm/sec Control: CYBELEC ModEva 10S work height max.: 900 mm table width: 104 mm back stop - adjustable: 800 mm oil volume: 250 l total power requirement: 18,5 kW weight: 10900 kg range L-W-H: 4250 x 1700 x 2850 mm from a maintenance workshop - good condition () New price ~ 84.000 euros Furnishing: - with DELEM numerical CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high-quality color LCD screen (TFT) - pivoting control, front right - controlled axes : Y1 + Y2 + X + R + CNC crowning (WILA) - CNC electric backgauge (X axis) Travel speed 500 mm/sec. - CNC electric height adjustment (R axis) Travel speed 350 mm/sec. ...

M. No.: 3704 Equipment / Additional information: Volt: 220 // Hz: 50 WITH PEDAL

S. No.: 3011747 Equipment / Additional information: Volt: 230 // Hz: 50 WITH PEDAL Condition: doesn’t work properly, needs service

Used disk centrifuge made by Alfa Laval, type: 3191. New: 1974.

-Metal Detector -Manufacturer: S+S Separation and Sorting Technology GmbH - Type: Ecoline 750/300/100 -Mains voltage: 230 / 115 VAC - Frequency: 50/60 Hz

Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...

Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996

Manufacturer: IMA Nowimat Leistenmaschine, Type: U/F/12/360, Year: 1996, Min-max edge material mm: 3-12, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 10-25, Premilling: yes, Application of separation agent: no, Coil magazine: 1-fach, Strip magazin: Ja, Min.-max. batten magazine mm: yes, Mitre stations: yes, Radius milling axis adjustment: yes, Corner tracing type: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: no, Bonding part EVA: yes, Groove milling: Freiplätze 3, Workpiece support: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1996

Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE  ...

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Manufacturer: Giardina UV Walzenbeschichtungsanlage UV, Type: GS 01 FWM + ST/SPC 302/12, Year: 2002, Control: Siemens, Work piece width min-max mm: 85-250, Min.-max. workpiece length in mm: 1600, Min.-max. workpiece height in mm: 8-30, Working widht max mm: 300, Operating side: links, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 60, Gummierte Auftragswalze mm: yes, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Metering roller drive m/min: 20-30, Glättwalzengeschwindigkeit ca. m/min.: 10-40, Widht of roller coater: 320, rbakel: yes, Feeding speed min/max: 60, Pump system: yes, UV dryer: 12 Lampen, Ein Mann Bedienung: yes, Vor und Rücklauf: yes, kW power 1 lamp: ca.2,5, Adjustable: yes, Position of lamps: gerade, Conveyor lenght mm: 4500, FREE TEXT: Giesskopf zum Aufgiessen von UV-Lacken<CRLF>Kantenb ...

Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece supp ...

Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...

Please see the pictures for the data!

- No Tailstock - Automatic doors - Tool eye - Chip conveyor