por used for sale

Te Koop: Fischer & Porter flowmeter DN 25 ABB COPA-XE d DE 47 Tatalum

Te Koop: Fischer & Porter flowmeter DN 25 ABB TRIOWIRL VT41

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

Numerically controlled gantry milling machine PORĘBA FBA125 X3M with SINUMERIC 820S control. Type FBA 125 X3M Built in 1997 Distance between columns 1500 mm Working table dimensions: 3000x1000mm Max. Distance from the work table to the spindle 1250 mm X axis travel 3000 mm Headstock travel along the axle beam 1750 mm Travel of the headstock in Z axis 1000 mm Table load 12,000 kg Spindle (2 speed ranges) 2000 rpm, 30 kW, SK50 Manual tool change Currently, the machine is excluded from the production process.

Code: 0229 Brand: POR Model: A 100N - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard With covered suction filtering battery ASPIR MECC AM B/64 CS - CE Standard Technical data Briquette diameter mm 65 Max briquette length mm 50/300 Output m3/h 1,454 Motor Hp 10 Drum diameter mm 1200 Pump lt 50 Level sensor Inspection door Cooling unit Overall dimensions mm 2115 x 1350 x 1700 h Weight kg 1000 Covered suction filtering battery SPIR MECC AM B/64 CS - CE Standard - with 64 filtering tubes Flow rate m3/h 8500 Power Kw 0,18 Round attach with connecting flange Overall dimensions mm 2100 x 2100 x 2800 h Weight kg 650

POR Super Oscar briquetting machine – after technical review – Italian production – year of production 2010 – sleeve and oil cooling – Odometer Reading 1659.10 mth TECHNICAL PARAMETERS: Briquette diameter 80 mm .max. Briquette Length 80 mm capacity 350 kg/h engine power 27.5 kW hydraulic crushing 1400 kg/cm2 .max. Operating Force 150 bar oil capacity 600 liters hopper diameter Ø 1200 mm container height 90 cm dimensions (length/width/height) 2500 x 1900 x 1800mm net weight 2400 kg Super Oscar PLUS is equipped with an enlarged feed drawer and specially hardened sleeves. The increased hardness of the sleeves has a positive effect on their service life, especially when we want to briquette various raw materials

Briquetting machine make Por series A 6 Complete with 36 sleeve filter, aspirator and connection ring to the machine Engine power HP 10 (kW 7.5) Briquette diameter 60 mm Maximum briquette length 50 mm with flat punch Number 14 cycles per minute Production 0.819 m3/h (+/- 10%) with maximum humidity 17% (purely indicative data which may vary based on the physical structure of the material) Dimensions: Height 1430 mm / Front 1660 mm / Depth 1100 mm / Weight 760 kg Inspection door with viewer Automatic start/stop level sensor Electromechanical panel

; ready for immediate use

PORO cutting machine with BURNY 2.5 control (with 50 standard macros)+ photo scope (template can be saved), 2 stueck Harris cutting torch cutting range up to 300mm, numerous dues available template table 1250x3000mm, firing table 1500x4500mm. controls shows sporadic

Te Koop: Fischer & Porter flowmeter DN 20 Model D10 D 1465 G

Te Coop: Fischer & Porter flowmeter DN25 Model D10 DK 1425 A De prijs is incl. 21% BTW

Te Coop: Fischer & Porter flowmeter DN25 Model D10 D 1465 D De prijs is incl. 21% BTW

Te Coop: Fischer & Porter flowmeter DN25 Model D10 D 1465 G De prijs is incl. 21% BTW

Te Koop: Fischer & Porter flowmeter DN 40 Model: 10 d 1465 1 D deksel ontbreekt.

Te Koop: Fischer & Porter flowmeter DN 10 Model COPA XT DT 43

Te Koop: Flowmeter van Fisher & Porter Model: D10 D 1465 D

Propellers size from 38 Inches up to 80 inches CU1 and CU4

Turning diameter: 940 mm Turning length: 3000 mm Turret positions: 8 CNC Brand: Siemens MACH-id     4027 MAKE         Poreba TYPE           TRP 93 MN YEAR          2003 SPECIFICATIONS Swing over bed Ø   940 mm Control     Siemens Swing over cross slide     570 mm Distance between centres      3000 mm Work piece weight         9200 kg Spindle bore      254 mm Spindle speeds / ranges         500 Rpm Bed width         585 mm Power     22 Kw DIMENSIONS Length       6270 mm Width       2735 mm Height        2400 mm incl. 8 position revolver incl ...

Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg MACH-id     3990 MAKE         Poreba Poland TYPE           TCG 160 YEAR         1995 SPECIFICATIONS Swing over bed Ø      1600 mm Swing over cross slide       1300 mm Distance between centres    10.000 mm Work piece weight       40.000 kg Spindle speeds / ranges        200 Rpm Bed width      1300 mm Power        75 Kw DIMENSIONS Length         15900 mm Width           2800 mm Height         2800 mm Poreba TCG 160 lathe, we ha ...

turning diameter over bed: 1930 mm turning diameter over slide rest: 1520 mm turning length: 5000 mm turning speeds: 0,5-250 U/min spindle bore: 105 mm workpiece weight: 35 t steady: 400-700 mm steady: 700-1200 mm steady: 1000-1600 mm control: Siemens total power requirement: 106 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 600 mm centre distance: 6200 mm spindle speed:: 1.6-315 U/min tailstock quill diameter: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t steady: 3 digital readout: total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: 11x2,4x1,9 m drive motor: 75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1100 mm turning length: 6000 mm control: Siemens 840D turning diameter over slide: 740 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mm turning diameter over slide rest: 530 mm turning length: 8000 mm turning dia. in gap: 1080 mm spindle diameter: 95 mm speed: 8-800 (21x) U/min total power requirement: 15/22 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-Jaw chuck 3-Jaw chuck 2x Steady Rest 4-Way toolpost The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 10000 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 6000 mm turning dia. in gap: 1250 mm spindle diameter: 95 mm speed: 8-800 (x24) U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 8000 mm speed: 800 U/min spindle passage: 105 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1350 mm turning length: 6000 mm : . Power compound 4-jaw chuck, Ø 1.000 mm Steady rest, Ø 500 mm Work rest Rapid tool post Coolant system Rapid traverse 2-Axis Trak D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spreader, door spreader, door assembly -Number: 8x per case -Number: 2x spreading device available in the case -Price: per piece -Weight: 15 kg/piece

Center height: 0 mm Center distance: 6000 mm Spindle bore: 0 mm Make Poreba TPK 8 Type TPK 80 Year 80 er Poreba drehmaschine Poreba lathe tokarki Centre height (mm) Swing bed = 830 Center distance (mm) Swing sup = 530 Spindle bore Centres = 6.000 Workpiece weight 6 Ton 3 x Fixed steady rest Trak 2 axis Dro 4 chuck 800  

Overhauled Poreba 1100 mm x 4000 mm heavy duty lathe Diameter 1100 mm Distance between centers 4000 mm

CNC portal machining center make PORTATEC type PBZ 30/18Year of construction 1999Table mounting and processing surface X u. Y: 3000 x 1800 mmvertical processing height Z: 300 mmSpindle mount: ISA 30Number of tools in the magazine: 8Passage between the uprights of the portal: 2080 mmSpindle speed: 1500 - 24000 rpm.External dimensions approx: 4000 x 2500 x 1800 mmDrive power: 7.5 kWWith- Portatec-Siemens control- Tool changer- Vacuum pump for table clamping- add. Pre-head clamping on the table- dedusting system- Handheld remote control device- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Control unit Siemens Sinumerik 840D Passage over the bed 650 mm Passage diameter over the bed 380 mm Distance between centers 3000 mm Spindle bore 105 mm Number of ranges 2 (automatic change) Spindle speed 2 - 2000 rpm Tailstock quill diameter 100 mm Tailstock quill extension 200 mm Tailstock taper 6 Morse Traverse travel 370 mm Weight 5500 kg

turning diameter:2000 mm faceplate diameter:2000 mm max. workpiece weight:6000 (fliegend) kg weight of the machine ca.:30 t main drive motor:55 kW

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Meinert Portalbeschickung, Year: ca.1990, Control: Schützsteuerung, Work piece width min-max mm: 150-1200, Min.-max. workpiece length in mm: 500-2500, Min.-max. workpiece height in mm: 10-60, Vacuum feeding: yes, Longitudinal feeding: ca.3500, Stacking pattern, single-row: yes, Number of stacks: 1, Stack height in mm: ca.1200, Cycles approx.: 6, Number of sucking lines: 2, Removal of protective boards: no, Feeding speed continous adjustable: yes, Erection in a pit: für Bühne yes, Hydraulic lifting table kg: 2000, Drain roller operation: Auslaufband, Year :ca.1990

1) Wood pulveriser input 12mm out put 150mesh 2) hot mixer max temperature 120dg capacity 100 kg per pach(15 mints each pach) 3) PE pruvolizer (from granules to powder) capacity 200 kg per hour 4) Crusher capacity 500 kgper hour 5) Wpc pelletizing extrotion line capacity 300 kg per hour 6) Extrusion line to make wpc wall and decking capacity 42 mters per hour including cooling table and cutting table and dropping area. This factory includes all the necessary tools and accessories, it is almost new in condition, built in 2021. It has produced 5000sqm of product

Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36 / 914 mm Speed adjustable -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm -Weight: 112 kg with pallet

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover

with CNC control, Fabr. SIEMENS, type: 810, max. turning length: 3000 mm, turning diameter over bed: 940 mm, power consumption: 2 kW, NOTE: The machine was completely overhauled in 2014

Description: Traverse length 4600 mm maximum capacity: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,200 x 800 mm, weight approx.: 200 kg

Marel IPM3 X600 Portioner for fish and meat Released: 2003 Condition: Restored Designed for slicing meat, fish fillets and whole fish into portions of similar weight. Two working conveyor belts allow you to speed up the slicing process and increase the productivity of 8 to 10 workers. Equipped with a dispersal conveyor belt, a sorting device on 2 x 2 baskets. Dimensions: 3400 x 1620 x 1700 mm. Pipeline width: 280 mm. Pipeline speed: 0.5 meters per second The number of resins per minute is 5 to 8. Power: 7.1 kW Connectivity: 3 x 380 - 480 B Send a request

Capacity: up to 1800 pc/h Main motor power: 1 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 120 Lenght: 80 Height: 175 Delivery time: after the advanced payment machine is ready for delivery

Portion cutter Marel I-Cut 22 Dual-lane portion cutter for cutting a product into portions of exact weight. Laser scanning system provides 3-D scanning measures and as a result - high accuracy of cutting. Cutting speed is up to 1500 strokes per minute on each lane Power: 8 kW Electricity: 3 x 230 + PE V, 50/60 Hz

For sale Portioner for minced meats from the manufacturer CFS, model PORTIONCUT. Its condition is completely renovated, revised and guaranteed. Built in stainless steel in its entirety to the passage of the product. Electrical connection at 220-240 V / 50-60Hz 0.35kW. External dimensions 1320 x 600 x 1120 mm high. Weight 100kg.

Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg