SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover  ...

• more information

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel  ...

Te Koop: Fischer & Porter flowmeter DN 25 ABB COPA-XE d DE 47 Tatalum  ...

• more information

Te Koop: Fischer & Porter flowmeter DN 25 ABB TRIOWIRL VT41  ...

• more information

Horizontal Lathe POREBA TCA 160 x 12 m Condition: very good, complete Technical details: Max. swing over bed 1600 mm Max. swing over carriage 1280 mm Max. swing over gap 1600 mm Turning length (between centers) 12000 mm spindle turning speed (min) 0.85 rpm spindle turning speed (max) 170 rpm The width of guide way 1100 mm Dia. of spindle bore 105 mm Taper of center sleeve 120/80 Feeds: bed slide/longitudinal 0,19-5, 0 mm/1 spindle rotation Feeds cross slide 0,095-2, 5 mm/1 spindle rotation Rapid travel-longitudinal/face 4000 mm/min Max work piece weight centre this centre 30000kg Max work piece weight with 2 steady rest 40000kg Faceplate diameter 1600 mm Metric thread  ...

Mobile elevating belt with dough portioner, plastic belt, belt width: 700 mm, elevating height: 2700 mm, total dimensions: 6100 mm x 1350 mm x 2850 mm. ...

• more information

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

Numerically controlled gantry milling machine PORĘBA FBA125 X3M with SINUMERIC 820S control. Type FBA 125 X3M Built in 1997 Distance between columns 1500 mm Working table dimensions: 3000x1000mm Max. Distance from the work table to the spindle 1250 mm X axis travel 3000 mm Headstock travel along the axle beam 1750 mm Travel of the headstock in Z axis 1000 mm Table load 12,000 kg Spindle (2 speed ranges) 2000 rpm, 30 kW, SK50 Manual tool change Currently, the machine is excluded from the production process.

POREBA Model: TR 90 x 6000 Manufacturer: POREBA- Poland Model: TR 90 x 6000 Condition: very god, complete, no missing or broken parts Technical details: Distance between centres: 6000 mm Height of centres over bed: 435 mm Height of centres over carriage: 310 mm Swing over bed: 900 mm Swing over carriage: 570 mm Swing in gap: 1150 mm Turning length in gap: 390 mm Spindle bore: 105 mm Spindle taper: Morse’a 6 Spindle speeds number: 18 Spindle speeds: 7.5 - 380 rpm Numer of feeds without replacing wheels: 55 Longitudinal feeds: 0.13 - 4 mm Cross feeds: 0.065 - 2 mm Number of metric threads: 55 Range of metric feed strokes: 0.5 - 15 mm Number of inch thread ...