2745 results Plate edge milling machines

similar results found in category milling machines

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: milling machines
Updating date: 07.04.2020 item-No.: 144912683
approved
dealer
New in: 1989
used
Seller: country1-de ZOMA Maschinenhandel

Consol milling machine, used Milling machine, used Model: FGS 32/40 Built / year: 1989 Fabrikat/ Make TOS Table/ table: 1400 x400 mm Speed/ speeds: 35...1800 rpm X Way/ x travel: 1000 mm Y Way/ y travel: 400 mm Z Way/ z travel: 450 mm Spindle cones/taper: ISO 50 Main drive/ main drive: 11 kW Weight: 4400 kg Specification: 3 axes - digital display / DRO

Category: milling machines
Updating date: 07.04.2020 item-No.: 140523530
approved
dealer
New in: 1978
used
Seller: country1-de ZOMA Maschinenhandel

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Category: milling machines
Updating date: 17.02.2020 item-No.: 125284637
approved
dealer
New in: used
Seller: country1-de Troostwijk Auctions
Location: Ljungaverk
Price: 6.200 €

Robotcell incl. ABB IRB 6640 / 2,8-185, IRC 5 For different milling and cutting functions. Rollers approx, 16m infront of and behind the operation area. Installed 2015

Category: milling machines
Updating date: 24.02.2020 item-No.: 145226155
approved
dealer
New in: 2016
used
Seller: country1-fi Chicagowood Malax
Location: 66140 Malax

ACCUTECH Machinery CO UNIVERSAL MILLING MACHINE 2500 TO year 2016 S/N 11051102 in very good condition, used only very sporadically STANDARD FEATURES: Rapid traverse on "X", "Y" & "Z" axis. Via inverter variable feeding on "X", "Y" & "Z" axis High quality meehanite casting body GC-45/DIN-40. All types & shafts are hardened & ground. Table swivels .45° degrees left & right. All "X", "Y" & "Z" against square slide ways & table surface are hardened & ground. Motorized ARM/RAM elec. Engine is 3.75KW (5.5HP) Horizontal spindle elec. Engine is 5.5KW (7.5HP) All square slide way & dovetail way are bigger &stronger. Cast iron is either ASTM No. 40/meehanite GC-45 or DIN GG-40. TABLE Table area 1500x350mm (59x13.7") Number of "T" shaped slots 5-16H7 Distance between "T" shaped slots 60mm Rotary movement of table in both direction 45° Traverse Automatic Long ...

Category: milling machines
Updating date: 17.02.2020 item-No.: 144892558
approved
dealer
New in: new
Seller: country1-de Hilco Industrial
Location: Lüdenscheid

Mill name: Quarto 2 Builder: Achenbach Building year: 1966 Modified: 2005/2006 Type: Quarto Revamping: Motors+drives+el.cont. 2000 Flatness 2005 Gauge 2006 Max entry gauge: 320 µm Min exit gauge: 16 µm Maximum width (mm): 1135 Maximum coil diameter (kg/mm width): 2 Maximum speed (m/min): 720 Main drive power (kW): 400 Total maximum load (kN): 1600 Cooling capacity (l/min): 800 Filtration: Achenbach Superstack filter Number of plates Number of unwinders: 1 Max unwind tension main unwind (kN): 8 Max rewind tension (kN): 8 Gauge measurement sensor: Mesacon 2006 AGC: Optiroll 2006 Flatness measurement: Optiroll 2005 AFC: Optiroll 2005 Electrical control: Siemens / Bachmann

Category: milling machines
Updating date: 17.02.2020 item-No.: 144892598
approved
dealer
New in: used
Seller: country1-de Hilco Industrial
Location: Lüdenscheid

Mill name: Quarto 3 Builder: Achenbach Building year: 1963 Modified: 2006 Type: Quarto Revamping: HP hydrailic 2001 Motors+drives+el.cont. 2002 extended diameters 2002 Max entry gauge: 90 µm Min exit gauge: 12 µm Maximum width (mm): 1135 Maximum coil diameter (kg/mm width): 2 Maximum speed (m/min): 1100 Main drive power (kW): 400 Total maximum load (kN): 1600 Cooling capacity (l/min): 800 Filtration: Achenbach Superstack filter Number of plates Number of unwinders: 1 Max unwind tension main unwind (kN): 5 Max rewind tension (kN): 5 Gauge measurement sensor: Mesacon 2006 AGC: Mesacon 2006 Flatness measurement ---- AFC ---- Electrical control: Siemens

Category: milling machines
Updating date: 17.02.2020 item-No.: 144892604
approved
dealer
New in: used
Seller: country1-de Hilco Industrial
Location: Lüdenscheid

Mill name Quarto 4 Builder Achenbach Building year 1960 Modified 2006/2008 Type Quarto Revamping Max entry gauge 2 x 30 µm Min exit gauge 2 x 5,5 µm Maximum width (mm) 1118 Maximum coil diameter (kg/mm width) 1 Maximum speed (m/min) 600 Main drive power (kW) 210 Total maximum load (kN) 1600 Cooling capacity (l/min) 800 Filtration DeLaval Filter Number of plates Number of unwinders 1 Max unwind tension main unwind (kN) 4 Max rewind tension (kN) 4 Gauge measurement sensor Mesacon 2006 AGC Mesacon 2006 Flatness measurement ---- AFC ---- Electrical control ABB 2008

Category: milling machines
Updating date: 17.02.2020 item-No.: 144892607
approved
dealer
New in: used
Seller: country1-de Hilco Industrial
Location: Lüdenscheid

Mill name: Quarto 5 Builder: Achenbach Building year: 1959 Modified: 2006/2008 Type: Quarto Revamping: HP / LP hydrailic 2006 Max entry gauge: 2 x 30 µm Min exit gauge: 2 x 5,5 µm Maximum width (mm): 1118 Maximum coil diameter (kg/mm width): 1 Maximum speed (m/min): 600 Main drive power (kW): 210 Total maximum load (kN): 1600 Cooling capacity (l/min): 800 Filtration: DeLaval Filter Number of plates Number of unwinders: 1 Max unwind tension main unwind (kN): 4 Max rewind tension (kN): 4 Gauge measurement sensor: Mesacon 2006 AGC: Mesacon 2006 Flatness measurement ---- AFC ---- Electrical control: ABB 2008

Category: milling machines
Updating date: 12.07.2019 item-No.: 63667016
approved
dealer
New in: used
Seller: country1-ch Catalano Werkzeugmaschinen AG

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Category: milling machines
Updating date: 11.02.2020 item-No.: 57252514
approved
dealer
New in: used
Seller: country1-ch Catalano Werkzeugmaschinen AG

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Category: milling machines
Updating date: 26.05.2020 item-No.: 145566991
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 125 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145566992
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 125 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322052
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Dividing attachment: centre heightTailstockRigide tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322087
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322088
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:Vertical: ISO 30 Horizontal: W20 Feeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Vice: width: 100 mmCoolant systemSteady

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322089
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:SteadyTilting and swivel table

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322090
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322355
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 200 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 230 mmDistance from vertical spindle to table: 310 mmDistance from horizontal spindle to table: 330 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:Vertical: ISO 30 Horizontal: W 20 Feeds steps:: 8 longitudinal from: 12 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2 HPMachine´s weight about: 500 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1800 mmVarious accessories:Motorized table adjustment verticallyUniversal

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322382
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 800 mmTable width: 300 mmLongitudinal travel (X-axis): 495 mmTransversal travel (y axis): 292 mmVertical travel (z axis): 399 mmDistance from horizontal spindle to table: 480 mmSpindle speeds:steplessfrom: 50 rpmup to: 3400 rpmTaper in spindle: 40 ISOFeeds stepless:longitudinal from: 10.0 mm/minup to: 600 mm/mintransversal from: 10.0 mm/minup to: 600 mm/minvertical from: 10.0 mm/minup to: 600 mm/minVertical quill travel: 45 mmRapid traverse:longitudinal: 1.5 m/mintransversal: 1.5 m/minvertical: 1.5 m/minVoltage 50 Hz 3x: 380 VoltMotor output: 4.0 HPTotal power required: 5.0 HPMachine´s weight about: 1300 kgOverall dimensions machine:Length: 1700 mmWidth: 1500 mmHeight: 1800 mmVarious accessories:Coolant system

Category: milling machines
Updating date: 26.05.2020 item-No.: 145321634
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Dividing attachment: centre height: 85 mmTailstockVice: width: 50 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145321928
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataLongitudinal travel (X-axis): 100 mmTransversal travel (y axis): 75 mmVertical travel (z axis): 150 mmSpindle speeds:number (steps): 6 from: 125 rpmup to: 4000 rpmTaper in spindle:: 12 WVoltage 50 Hz 3x: 380 VoltMotor output: 0.3 HPMachine´s weight about: 120 kgOverall dimensions machine:Length: 700 mmWidth: 600 mmHeight: 1400 mmVarious accessories:Dividing attachmentVice: width: 60 mmSteadySet of collets

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322446
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 100 mmCross Y: 75 mmVertical Z: 150 mm Technical dataLongitudinal travel (X-axis): 100 mmTransversal travel (y axis): 75 mmVertical travel (z axis): 150 mmhydraulicTaper in spindle:: 12 WSpindle speeds:number (steps): 8 from: 125 rpmup to: 4000 rpmFeeds:steplesslongitudinal from: 10.00 mm/minup to: 2000.00 mm/minRapid traverse:longitudinal: 4.0 m/minVoltage 50 Hz 3x: 380 VoltDriving motor: 0.33 HPMachine´s weight about: 220 kgOverall dimensions machine:Length: 1300 mmWidth: 530 mmHeight: 1400 mmVarious accessories:Dividing attachment: centre height: 75 mmVertical headLamp

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322447
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 100 mmCross Y: 75 mmVertical Z: 150 mm Technical dataTable length: 220 mmTable width: 100 mmLongitudinal travel (X-axis): 100 mmTransversal travel (y axis): 75 mmVertical travel (z axis): 150 mmhydraulicSpindle speeds:number (steps): 8 from: 125 rpmup to: 4000 rpmFeeds:steplesslongitudinal from: 10 mm/minup to: 2000 mm/minRapid traverse:longitudinal: 4 m/minVoltage 50 Hz 3x: 380 VoltDriving motor: 0.33 HPMachine´s weight about: 220 kgOverall dimensions machine:Length: 750 mmWidth: 500 mmHeight: 1500 mmVarious accessories:Dividing attachment: centre height: 85 mmVice: width: 65 mmRigide tableVertical headSteady

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322449
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 210 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Rigide tableSemi-rotary tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322194
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 800 mmTable width: 250 mmLongitudinal travel (X-axis): 400 mmTransversal travel (y axis): 175 mmVertical travel (z axis): 450 mmSpindle speeds:steplessfrom: 50 rpmup to: 3400 rpmTaper in spindle: 30 ISOFeeds stepless:longitudinal from: 12 mm/minup to: 360 mm/minvertical from: 12 mm/minup to: 360 mm/minVertical quill travel: 60 mmRapid traverse:longitudinal: 1.8 m/minvertical: 1.8 m/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.5 HPMachine´s weight about: 900 kgOverall dimensions machine:Length: 1200 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322199
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 800 mmTable width: 300 mmLongitudinal travel (X-axis): 500 mmTransversal travel (y axis): 325 mmVertical travel (z axis): 420 mmDistance from vertical spindle to table: 365 mmSpindle speeds:steplessfrom: 50 rpmup to: 3400 rpmTaper in spindle: 40 ISOFeeds stepless:longitudinal from: 10.0 mm/minup to: 600 mm/mintransversal from: 10.0 mm/minup to: 600 mm/minvertical from: 10.0 mm/minup to: 600 mm/minVertical quill travel: 60 mmRapid traverse:longitudinal: 1.5 m/mintransversal: 1.5 m/minvertical: 1.5 m/minVoltage 50 Hz 3x: 380 VoltMotor output: 3.0 HPTotal power required: 4.8 HPMachine´s weight about: 1600 kgOverall dimensions machine:Length: 1200 mmWidth: 1600 mmHeight: 1800 mmVarious accessories:Dividing attachment: centre height: 100 mmSteadyR ...

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322457
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 185 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 185 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 95 rpmup to: 1500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 450 kgOverall dimensions machine:Length: 1000 mmWidth: 900 mmHeight: 1500 mmVarious accessories:Universal tableLamp

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322458
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 190 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 600 kgVarious accessories:Vertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322459
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 190 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Coolant systemSteadyUniversal tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322460
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 190 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmSpindle speeds:number (steps): 8 from: 95 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 500 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Universal tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322461
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 210 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 210 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Rigide tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322462
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 200 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 200 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:SteadyUniversal tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322463
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 180 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 180 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 95 rpmup to: 1500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 450 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1400 mmVarious accessories:Rotary table:diameterSteady

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322464
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 200 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 200 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 500 kgVarious accessories:Coolant systemSteadyUniversal tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322465
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 600 mmTable width: 190 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmSpindle speeds:number (steps): 8 from: 155 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 13.0 mm/minup to: 164 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 1.5 HPTotal power required: 2.0 HPMachine´s weight about: 500 kgOverall dimensions machine:Length: 1000 mmWidth: 900 mmHeight: 1400 mmVarious accessories:SteadyRigide tableLamp

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322213
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Rigide tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322214
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Universal tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322215
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Digital readout number of axis:: 3 Universal tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322216
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2 HPTotal power required: 3 kVAMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:SteadyRigide tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322217
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmDistance from vertical spindle to table: 260 mmDistance from horizontal spindle to table: 310 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 2000 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 116 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPTotal power required: 2.5 HPMachine´s weight about: 600 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Vice: width: 100 mmUniversal tableVertical milling head

Category: milling machines
Updating date: 26.05.2020 item-No.: 145630960
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 125 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145630961
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 125 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145630962
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 125 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mm

Category: milling machines
Updating date: 26.05.2020 item-No.: 145630963
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 800 mmTable width: 300 mmLongitudinal travel (X-axis): 500 mmTransversal travel (y axis): 325 mmVertical travel (z axis): 420 mmDistance from vertical spindle to table: 365 mmSpindle speeds:steplessfrom: 50 rpmup to: 3400 rpmTaper in spindle: 30 ISOFeeds stepless:longitudinal from: 10.0 mm/minup to: 600 mm/mintransversal from: 10.0 mm/minup to: 600 mm/minvertical from: 10.0 mm/minup to: 600 mm/minVertical quill travel: 60 mmRapid traverse:longitudinal: 1.5 m/mintransversal: 1.5 m/minvertical: 1.5 m/minVoltage 50 Hz 3x: 380 VoltMotor output: 3.0 HPTotal power required: 4.8 HPMachine´s weight about: 1600 kgOverall dimensions machine:Length: 1200 mmWidth: 1600 mmHeight: 1800 mmVarious accessories:Dividing attachment: centre heightTailstockDigita ...

Category: milling machines
Updating date: 26.05.2020 item-No.: 145321459
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Table length: 0 mmTable width: 0 mmLongitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 125 rpmup to: 2500 rpmTaper in spindle:: 20 WFeeds steps:: 8 longitudinal from: 12.0 mm/minup to: 232 mm/minVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 620 kgOverall dimensions machine:Length: 1100 mmWidth: 900 mmHeight: 1600 mmVarious accessories:Set of toolholdersTool cabinet

Category: milling machines
Updating date: 26.05.2020 item-No.: 145322297
approved
dealer
New in: used
Seller: country1-ch Muller Machines SA

Longitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 800 mmTable width: 250 mmLongitudinal travel (X-axis): 400 mmTransversal travel (y axis): 175 mmVertical travel (z axis): 450 mmTaper in spindle ISO: 40 Spindle speeds:steplessfrom: 50 rpmup to: 3400 rpmFeeds:steplesslongitudinal from: 12 mm/minup to: 360 mm/minvertical from: 12 mm/minup to: 360 mm/minRapid traverse:longitudinal: 1.8 m/minvertical: 1.8 m/minVoltage 50 Hz 3x: 380 VoltDriving motor: 2.5 HPMachine´s weight about: 1200 kgOverall dimensions machine:Length: 1200 mmWidth: 900 mmHeight: 1600 mmDimensions of the control:Length: 1200 mmWidth: 600 mmVarious accessories:Rigide tableVertical headSteadySet of short cutter arbors: 2 Set of long cutter arbors: 2 Longitudinal programm control

Category: milling machines
Updating date: 31.03.2020 item-No.: 145737043
approved
dealer
New in: used
Seller: country1-nl Veltman Machines BV
Location: 5061 Oisterwijk
Price: 4.950 €

Milling machine Aciera F3 Travel XYZ: 300-135-270 Spindle holder: W20 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed on the Z-axis Automatic feed on the X-axis Hand-held path to the X-axis Fraeskop 360° rotary Turning the tilting table li and re 30° With Philips 2-axis digital display Engine brake Cowling pump With various accessories, among others W20 collet and many other W20 tool holders Shock head Counterholder Half tipping table

Category: milling machines
Updating date: 12.11.2019 item-No.: 124582002
approved
dealer
New in: 2019
used
Seller: country1-nl Veltman Machines BV
Location: 5061 Oisterwijk
Price: 3.650 €

Toolroom milling machine Aciera F3R Iso 30 Travels XYZ: 300-300-135mm Spindeltaper: Iso 30 Spindelspeeds: 100-2000 Tablesize: 180x600mm Power feeds 27-500mm/min Tilting table 30° left and right Manual rapids 70mm/rev Incl 6 weldon Iso 30 tools Vice on turntable

Category: milling machines
Updating date: 18.12.2019 item-No.: 36628347
approved
dealer
New in: used
Seller: country1-ch Catalano Werkzeugmaschinen AG

Procedures x way 500 mm y way 320 mm z-way 420 mm table 350 x 900 mm Speed 50-3400 RPM. Recording ISO 40

Category: milling machines
Updating date: 18.10.2019 item-No.: 142353382
approved
dealer
New in: 1997
used
Seller: country1-uk CNC Management Ltd

Make: Aciera Model: F3 Year: 1997 Condition: Used Machine type: Mill Location of machine: Switzerland Ancillaries: Comes complete with tooling and manuals Machine Details Machine is in good working condition! Comes complete with tooling and manuals

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)