planer used for sale

Catalog No. 6822 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 5 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) universal spindle 230mm, right/left rotation adjustment 5.5kW - all spindles adjustable up / down, right / left - all spindles equipped with an electric brake - spindle diameter 40mm - from above, 4 metal, toothed introductory rollers - 3 pulling rollers from above, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - side pressure from below - 2 types of feed speed - feed motor 1.2 kW - electric setting of planing thickness - length of the introductory tabletop 2500mm - locked in the cabin - central lubrication of the countertop - diameters of the extraction spigot 150mm, 4x120mm - ...

Maximum width of forming film : 160 mm Forming area : 150 x 125 mm Maximum forming depth : 15 mm Mechanical output : 100 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 500 mm Reel of lidding film : 300 mm Inlet air pressure : 6-8 bar Feeding : Manual(can be automatic) Forming type : Vacuum

TECHNICAL DATA: Working width mm: 530 Working height max mm: 300 Number of knives: 4 Feedrate max m/min: 19 Total connection kW: 4 Weight Kg: 800

Bought for IVF center. however, it has never been used since the vitrification method was used. the counter was showing the last 13th process, which was only for me 5-6 times idle. no action has been taken. there are only a few scratches due to transport inside the laboratory. It is a safe machine.

Description: Drilling table size 530x220 mm knife: 3 pieces, length of surfacing-table: 2200x400 mm, planing height: 200 mm, planing width: 400 mm, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,200 x 1,000 mm, weight approx.: 900 kg

- planing width 530 mm- planing height min./max. 5-300 mm- max. chip removal 8 mm- min. workpiece length 280 mm- dimension thickness table 1000 x 530 mm- motor 5.0 kW / 400 V- speed 5500 rpm- safety knife shaft Z = 4, FI 120 mm with 4 strip planer knives 530 x 30 x 3 mm- feed speed infinitely variable 6.5 / 13 m/min.- slanted toothed steel feed roller- 2 smooth steel pull-out rollers- thickening table on 4 load spindles- electric height adjustment table pre-programmable with digital display of the planing height wood tray with scratch-free carpet support Suction nozzle 150 mm- Knife adjustment gauge- Dimensions L=1150, W=1120, H=1310 mm- Weight 650 kg

- planing width 1000 mm - planing height min./max. 3-300 mm - max. chip removal 9 mm - min. workpiece length 280 mm - dimension thickness table 1016 x 1100 mm - motor 18 kW / 400 V - speed 5000 rpm - motor height detection 1.0 kW - motor feed 1.5 kW - safety knife 18 kW / Z FI 125 mm with 4 strip planing knives 1016 x 35 x 3 mm - feed speed infinitely variable 5 - 20 m/min. - segmented steel feed roller - 2 steel pull-out rollers - thickening table on 4 steel spindles - electric height adjustment - thicktable pre-programmable with digital display of planing height - 2 height-adjustable sliding rollers in the thickness table - suction nozzle 200 mm - dimensions L=1560, W=1180, H=1350 mm - weight 1500 kg

- Hobelbreite 1300 mm - Hobelhöhe min./max. 3-300 mm - max. Spanabnahme 9 mm - min. Werkstücklänge 280 mm - Abmessung Dickentisch 1320 x 1100 mm - Motor 18 kW / 400 V - Drehzahl 5000 U/min - Motor Höhenverstekkung 1,0 kW - Motor Vorschub 1,5 kW - Sicherheitsmesserwelle Z = 4, FI 125 mm mit 4 Streifenhobelmesser 1320 x 35 x 3 mm - Vorschubgeschwindigkeit stufenlos 5 - 20 m/min. - segmentierte Stahleinzugswalze - 2 Stahl Auszugswalzen - Dickentisch auf 4 Stahlspindeln - elektrische Höhenverstellung - Dickentisch vorprogrammierbar mit Digitalanzeige der Hobelhöhe - 2 höhenverstellbare Gleitwalzen im Dickentisch - Absaugstutzen 200 mm - Abmessungen L=1860, B=1180, H=1350 mm - Gewicht 2000 kg

- Arbeitbreite 410 mm - min./max. Hobelhöhe 4 / 225 mm - 4-Messerwelle, FI 100 mm - Drehzahl 4500 U/min. - Motor 4,0 kW (5,5 PS) / 400 V - Motor Vorschub 1,1 kW (1,5 PS) - Absaugstutzen Durchmesser 120 mm - max. Spanabnahme 6 mm - Vorschub 8 / 12 m/min - manuelle Tischhöhenverstellung - 2 fein einstellbare Walzen im Dickentisch - Handrad mit Digitalanzeige zur Feineinstellung - Abmessungen L=1000, B=1000, H=1400 mm - Gewicht 450 kg

- Arbeitbreite 530 mm - min./max. Hobelhöhe 3 / 300 mm - 4-Messerwelle, FI 125 mm - Drehzahl 5000 U/min. - Motor 5,5 kW (7,5 PS) / 400 V - Motor Höhenverstellung 0,25 kW (0,34 PS) - Absaugstutzen Durchmesser 160 mm - max. Spanabnahme 8 mm - Vorschub 8 / 16 m/min - elektrische Tischhöhenverstellung - 2 fein einstellbare Walzen im Dickentisch - Handrad mit Digitalanzeige zur Feineinstellung - Abmessungen L=1200, B=1200, H=1400 mm - Gewicht 680 kg

- Hobelbreite 630 mm - Hobelhöhe min./max. 3-300 mm - max. Spanabnahme 8 mm - min. Werkstücklänge 280 mm - Abmessung Dickentisch 1050 x 630 mm - Motor 7,5 kW / 400 V - Drehzahl 4800 U/min - Sicherheitsmesserwelle Z = 4, FI 120 mm mit 4 Streifenhobelmesser 630 x 35 x 3 mm - Vorschubgeschwindigkeit stufenlos 0 - 16 m/min. - segmentierte Stahleinzugswalze - 2 glatte Stahl Auszugswalzen - Dickentisch auf 4 Tragspindeln - elektrische Höhenverstellung - Dickentisch vorprogrammierbar mit Digitalanzeige der Hobelhöhe - Holzablage mit kratzfreier Teppichauflage - Absaugstutzen 150 mm - Messereinstelllehre - Abmessungen L=1200, B=1100, H=1160 mm - Gewicht 950 kg

- Hobelbreite 810 mm - Hobelhöhe min./max. 3-300 mm - max. Spanabnahme 9 mm - min. Werkstücklänge 280 mm - Abmessung Dickentisch 1000 x 813 mm - Motor 11 kW / 400 V - Drehzahl 5000 U/min - Motor Höhenverstekkung 1,0 kW - Motor Vorschub 0,75 kW - Sicherheitsmesserwelle Z = 4, FI 125 mm mit 4 Streifenhobelmesser 810 x 38 x 6 mm - Vorschubgeschwindigkeit stufenlos 5 - 20 m/min. - segmentierte Stahleinzugswalze - 2 Stahl Auszugswalzen - Dickentisch auf 4 Stahlspindeln - elektrische Höhenverstellung - Dickentisch vorprogrammierbar mit Digitalanzeige der Hobelhöhe - 2 höhenverstellbare Gleitwalzen im Dickentisch - Absaugstutzen 160 mm - Abmessungen L=1350, B=1180, H=1350 mm - Gewicht 1200 kg

Working width: 530mm, planing height: 3-300mm, four-blade shaft diameter: 125mm, max. rotational speed: 5000/min, max. chip removal: 8mm, feed: 8/16m/min, motor power: 5.5kW, length: 1200mm, width: 1200mm, height: 1400mm, weight: 680kg, with electric table height adjustment, two adjustable rollers in the thicknessing table and handwheel with digital display for fine adjustment.

Space requirement: 11300 3950 2800 mm Object table: 5000 mm Sled movement: 2350 mm Permeability between columns: 1260 mm Machine weight: approx. 20t

jointer planer, dresser, flat planer, planer, jointer -Manufacturer: SCM surface planer type F4L -Working width: 400 mm -Number of knives: 4 pieces -Chip removal: 0 - 10 mm -Motor: 3 kW -Planer knife speed: 5500 rpm -Table: 2605 x 400 mm -Dimensions: 870/2605/H980 mm -Weight: 695kg

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display planing thickness: mech. Counter; Feed speed: 5 / 8 / 12 / 18; Feed roller: steel; Pressure beams: articulated; Pull-out roller: rubber; Table rollers: no; Motor power: 9 kW; Suction port: 150mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 810 kg; Motorized thicknessing table stroke with two speeds Numerical display for working height Thickness table made of cast iron The thicknessing table is mounted on four large trapezoidal threaded spindles for maximum stability and precision Four feed speeds Optionally with two rollers in the thickness table Standard with noise protection and chip protection curtain on the workpiece inlet and outlet roller contact pressure adjustable Front feed roller with helical gear Pull-out roller with rubber ...

Planer, dresser, planer with circular saw VEM, ELECTROPLATING LEIPZIG Planer: Type EH 125 max. planing width: 125 mm Working table: 620 x 125 mm Working height: 780 mm Circular saw: Type KS max. cutting fee: 35 mm max. saw blade diameter: Ø 200 mm work table: 330 x 240 mm Working height: 840 - 880 mm (adjustable) Motor: Type ES 160 0,45 kW 3000 rpm 220 V 1AC 50 Hz used, tested ! Dimensions 660 x 620 x 900 mm

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2130×515 mm Thicknessing table size 960×515 mm Working height 4 - 225 mm 2 feed speeds 9 - 14 m/min Approx. Onsite Dimension. (l x w x h): 215 x 1,100 x 1,250 mm, weight approx.: 820 kg

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2040×410 mm Thicknessing table size 960×410 mm Working height 4 - 225 mm 2 feed speeds 8 - 14 m/min Approx. Onsite Dimension. (l x w x h): 2,100 x 1,000 x 1,250 mm, weight approx.: 690 kg

Description: Planer shaft motor Kw (Hp) 5.5 (7.5) Planer shaft with 4 knives Ø 120 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 160 mm Table dimensions 930×630 mm Working height 5 - 300 mm 4 feed speeds 7-11-15-19 m/min Approx. Onsite Dimension. (l x w x h): 1,100 x 1,050 x 1,260 mm, weight approx.: 770 kg

Working width: 530 mm; Planing height: 250 mm; Planer shaft: strip knife; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: Mechanical counter; Feed speed: 2 speeds; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.5 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 900kg;

Working width: 410 mm; Planing height: 230 mm; Planer shaft: strip knife; Number of knives: 3; Height adjustment: handwheel; Display planer thickness: Scala; Feed speed: 7 m/min; Feed roller: steel; Pressure bar: -; Pull-out roller: steel; Table rollers: no; Motor power: 4.4 kW; Suction port: 100mm; Machine length: 800mm; Machine width: 700 mm; Weight: 205kg;

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Working width: 520 mm; Planing shaft: tersa; Number of knives: 4; Dressing table length: 2720 mm; Dressing table adjustment: lever; Hollow and pointed joint adjustment: no; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 870 kg; Large dressing tables made of cast iron The dressing table is adjusted by means of a precise parallelogram system, so that the distance between the table tips and the knife shaft remains the same in every adjustment position The large, stable dressing stop made of anodized aluminum is easily movable and can be tilted from 0Â - 45Â The inclination of the stop can be read from the workstation Standard with auxiliary stop Large four-knife shaft, precision-bearing Smooth running thanks to the precision unit and thanks to t ...

Working width: 180 mm; Working height: 110 mm; Working shafts: 4; Spindle arrangement: bottom, right, left, top; Motor power shaft bottom & top: 7.5 kW; Motor power shaft right & left: 7.5 kW; Adjustment shaft down: -; Adjustment shaft right: -; Adjustment shaft left: handwheel; Adjustment of the upper shaft: handwheel; Planer heads bottom & top: Centrolock; Planer heads left and right: Centrolock combined with roll forming option; Feed speed: 2; Feed roller pressure: Spring; Current consumption: 32.8 A; Extraction connection: Machine Length: Machine Width: Weight:

Working width: 630 mm; Planing height: 300 mm; Planer shaft: strip knife; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: digital display; Feed speed: infinitely variable; Feed roller: steel - articulated; Pull-out roller: 2 x rubber; Table rollers: no; Power consumption: 8.5 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 1000kg;

Description: 400 mm surface planer with 1350 mm pre-planer tables. Complete with horizontal drilling machine Approx. Onsite Dimension. (l x w x h): 2,550 x 1,200 x 1,500 mm, weight approx.: 500 kg

Description: Surface planer with 400 mm worktable complete with horizontal boring machine and 1250 mm pre-planer table Approx. Onsite Dimension. (l x w x h): 2,400 x 1,500 x 1,300 mm, weight approx.: 500 kg

Weibert D51 Thickness Planer 510 mm new 510 mm planing width Planing height 250mm Electric height adjustment of the Thicknesser table Digital display of the planing height Four pillar guide of the Thicknesser table Thicknessing table cast iron planed 1150 x 510 mm Motor 5,5 KW 400V 50 Hz 5-8-10-16 m / min feed rate Suction connector 160 mm G & RO-D510-CE Options: 7.5 KW motor power Autom. Star - Delta connection 4 knife - TERSA wave 2 sliding rollers in the thicknessing table

Planer blade sharpening machine Meinert with built-in Cabinet apparatus for gang saws weight approx. 350 kg Built in 1963 L x W x H 80 x 60 x 140 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Working width: 410 mm; Planer shaft: strip knife; Number of knives: 3; Dressing table length: 1800 mm; Dressing stop angle adjustable: yes 45Â to 90Â; Motor power: 4.4 kW; Engine braking: yes, automatic; Suction port: 100mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 295kg;

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric with table positioning; Planer thickness indicator: digital display; Feed speed: infinitely variable 5 - 22 m/min; Feed roller: steel articulated; Pressure beams: articulated; Pull-out roller: rubber 2 x; Table rollers: Yes; Engine power: 9.2 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 1000kg;

Working width: 410 mm; Planing height: 230 mm; Planing shaft: Tersa; Number of knives: 3; Height adjustment: handwheel; Display planer thickness: Scala; Feed speed: 7 m/min; Feed roller: steel; Pressure bar: -; Pull-out roller: steel; Table rollers: no; Motor power: 4.4 kW; Suction port: 100mm; Machine length: 800mm; Machine width: 700 mm; Weight: 205kg;

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: digital display; Feed speed: infinitely variable 5 - 22 m/min; Feed roller: steel; Pressure beams: articulated; Pull-out roller: rubber 2 x; Table rollers: no; Engine power: 9.2 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 1000kg;

Working width: 410 mm; Planer shaft: strip knife; Number of knives: 4; Dressing table length: 2500 mm; Dressing stop angle adjustable: yes 45Â to 90Â; Motor power: 5.5 kW; Engine braking: yes, automatic; Suction port: 100mm; Machine length: 2500 mm; Machine width: 750 mm; Weight: 570kg;

Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers

Description: The machine was only started for tests - maximum of 30 minutes. The test was made without any loads (wood) There for the item is brand new! serial number MP200/S/006/2020 , a reliable planer with a width of 410 mm Logosol DH410 has a lot in common with our PH260. The machine is built on the same principles and most of its components are the same as PH260’s, which means that it is a very sturdy machine with a cast-iron machine table and separate motors for each cutter and the feeder. Both the machines also have the same type of knives and cutter heads. The difference is that DH410 works with two cutters instead of four. Four-sided planing is made by running the board twice through the machine, while you only machine the board once when planing and dimensioning two sides up to a width of 310 mm and a height of 100 mm Improvements in the model 2 include: 2-sided pl ...

Description: Four-sided planer for processing classic parquet with chain drive It can process parquet from 200 to 600 mm and from 32 mm to 100 mm wide The capacity of the machine depends on the size of the parquet, up to approx. 150 to 300 m2 per shift Approx. Onsite Dimension. (l x w x h): 2,400 x 900 x 1,500 mm, weight approx.: 1,500 kg

Description: CASOLIN Planer with a chain for the drive and has the option of processing the upper, lower, right or only upper and lower elements Approx. Onsite Dimension. (l x w x h): 2,900 x 900 x 1,900 mm, weight approx.: 3,000 kg

Working width: 510 mm; Planing height: 250 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: digital display; Feed speed: 8 / 16; Feed roller: steel; Pressure beams: articulated; Pull-out roller: steel; Table rollers: no; Engine power: 7 kW; Suction connection: 120mm; Machine length: 800mm; Machine width: 900 mm; Weight: 650kg;

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!

see picture - on Anfr.

Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Single Planing Machine Fabr. WALDRICH COBURG Type 2E 1515Com. -No: 2110108 built in 1966combined gantry and milling machine with removable milling attachmentPlaner length: 2000 mmPlaning width: 900 mmPlaning height: 750 mmTable surface: 2000 x 650 mmpermissible workpiece weight: 1550 kgmilling head11 spindle speeds: 112 - 1120 rpmPower: 1.5 kWSpeed: 960 rpm.Tool holder: MK 3Max. Cutter diameter: 63 mmAxial adjustment of the milling head: 130 mmVertical adjustment: 170 mmAdjustment of the milling head on the boom: 630 mmtable driveMotor power of the feed pump: 3 kWFeed rates stepless Flow: 10 - 4200 mm / minReturn: 10 - 2800 mm / minCreep speed: 5 mm / minLongitudinal adjustment: 2000 mmWith- milling attachment- Sanding attachment- Planing steel holder- swiveling control panel- rapid traverse- mot. transom height adjustment- Separate control cabinet- hydr. speed adjustmentused,  ...

planing width 630 mm planerhe 200 mm, motorized adjustment 4 - Meswser shaft, connection 7.5 kW, weight 1.5 t; unmaintained