faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Spiralkneter PIETRO BERTO, type: easy120 - for 120kg of dough - 2 speeds - 1 boiler speed -Schüsselvolumen-203 litres -Bowl diameter: 800 mm -Course mixing arm: 101 / 202 RPM. -Boiler speed: 11 RPM. -El. Connection: 3 x 400 V, 50 Hz, 6.8 kW, 16A -Weight: 568 kg The dough tool is located in a very good condition of the bakery. Inspection and test run are possible by arrangement like. Last machine in stock!

Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton

Wickman 5/8 + Barloader Pietro Cucchi PB20 The machine is located in Spain. ...

• more information

WE OFFER AN WERY NICE CONDITION VARTICAL LATHE CNC Vertical Lathe (VTL) with C-Axis and Milling spindle & Pallet changer Pietro Carnaghi - ATF 8 TM Year 1995 NUM 1060 II CNC Control Pallet changer with 2 pallets Pallet diameter 800 mm Max. workpiece weight 1500 mm Swing diameter 1100 mm Turning diameter max. 1000 mm Turning height max. 750 mm Table drive motor 60 KW Table speeds 1.5 ~ 1000 rpm C-Axis 0.001° Milling spindle drive 23.5 KW Milling spindle speeds 12 ~ 3000 rpm Tool taper BT 50 Automatic tool changer for 80 tools Full work area guarding Chip conveyor Coolant through the spindle  ...

Used spiral mixer PIETRO BERTO, type: easy 120 E -in bakery condition- - with extendable boilers - for 120kg dough - 2 speeds - 1 boiler speed - Incl. 3 tank wagons - Bowl volume: 203 litres - Bowl diameter: 800 mm - Gears kneading arm: 101 / 202 rpm. - Boiler speed: 11 rpm.  ...

• more information

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

Used Stikken ovens PIETRO BERTO, Type: PBR H5/E-18 -In bakery condition - with gas burner - 3 ovens available - Sheets for baguette and 3-edge perforated sheets also available Visit and test run on request.  ...

• more information

Single-spindle bar feeder. control panel ePalm10 max. material length: 3,300 mm max. material diameter: 52 mm feeder width 830 mm feeder length 4,650 mm weight 1,500 kg Centering inserts can be purchased for the feeder: 28.5 mm 35 mm 38.1 mm 48 mm and clamping mandrels for diameters: 38 mm 31.9 mm 25.7 mm