pellet used for sale

Filling set for 2-point ampoules including: 1 crystallizer capacity 168 in 10ml filling in about 30 seconds 1 PELLETIER sealing tunnel Everything needs to be renovated

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adjustable defle ...

General SKU231U198 LocationBarneveld MakeRieter TypePRIMO 100 S No.10.0069173 Year of construction2006 Main Features Motor3 KW Width100 mm Specified Features - Pelletiser MaterialMild steel Pelletiserstrand pelletizer Rotor width130mm Rotor diameter100mm With roll feedingcheck Motor3 kW 220-240/380-420 Volt (598 rpm) Capacitymax 350 kg/h Outlet200x140 mm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight750 kg CEcheck Floorspace1,3x1 m Total height1,45 mPelletisersRieterMills > PelletisersBrand > Rieter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU231U190 LocationBarneveld MakeRieter TypePrimo 100S No.10.006-8519 Year of construction2000 Main Features Motor3.5 KW Width100 mm Specified Features - Pelletiser MaterialMild steel Pelletisercheck Rotor width130mm Rotor diameter130mm Number of rotor knives1 Motor 3,5 kW, 400 volt Number of strands:4 Capacity30-90 kg/min Outlet200x140 mm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight620 kg CEcheck Floorspace1,3x1 m Total height2,2 mPelletisersRieterMills > PelletisersBrand > Rieter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU063S235 LocationBarneveld MakeScheer & Cie TypeHSG400 No.21057927 Year of construction1990 Main Features Motor22 KW Inlet diameter200 mm Width400 mm Specified Features - Pelletiser Motor22 KW, 380/660 Volt Information Mounted on framecheck Mounted on wheelscheck Floorspace1,0x1,6 M Total height1,7 M Weight1200 KGPelletisersScheer & CieMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

For sale is a functioning pellet production line including controls. The plant is suitable for pelletizing agricultural raw materials (straw/hay/alfalfa etc.) and has an output of 1000-1600 kg/hour depending on the material. The complete system has approx. 800 operating hours The production line is composed of: cjffolp2bh Byfo0wxd Bale breaker 37 KW + bale conveyor table 10m and Hammer mill 75 KW Zyklon + Rotary Valve + Buffer Tank Scheuch dust filter house with control system and a capacity of 20,000m3/h including discharge for big bags, 2 Koller ring matrices pellet mill 110 KW with aut. Central lubrication. In the associated conditioner, the moisture content of the material is automatically controlled by means of a dosing pump and mist nozzle as well as a microwave sensor from the Envea brand. Pellet cooler with level sensors and automatic emptying. Vibrating scr ...

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Pellet Production Plant Capacity per hour: 4 tons -Moving floor -Conveyors -Chips heating system -Filter system -Sieve plant -Dry hammer mill -Pellet mill -Pellet loading system

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Complete pellet line for biomass or animal feed. CPM 3020-4 with 132 kW motor Including CPM Conditioner, CPM press and Geeelen cooler with fan and cyclone. Positive direct gear drive 132 kW, provides a 98% energy transfer Rounded cast gear case with internal ribbing for quieter operation Segmented die clamps for quicker die changes Metal-to-metal seals between components Modular gearbox design for production flexibility Replaceable quill flange Stainless steel pellet chamber Single motor 132 kW for greater efficiency Very good condition.

SC ECOPELET-BRICHET SRL sells the industrial pellet press, with the following characteristics: - year of production 2023; - motor 37 kw in 8 poles; - electric panel; - with ring mold; - capacity 1000 kg/hour softwood pellets, 700 kg/hour mixed pellets (50% beech, 50% fir); - pellets with a diameter of 6 mm. The machine produces wood pellets which is a biomass fuel used by the customers who use pellet heat

Stock - No.: 2166 1 used, in 2019 partly overhauled and tested film/foil/regrind pelletizing extrusion line EREMA type RGA 50 T equipped with: 1. cutter / densifier unit, new motor with 18,5 kW tangential ( T ) cutter - Ø 550 mm 2. Extruder single-screw Ø 50 mm – 20 LD motor 18,5 kW – NEW Frequency Converter 3. screen pack changer sieve- Ø90 mm with hydraulic unit-new 4. watering-granulation unit HG, pelletizer drive 0,75 kW 5. pellet drying vibrating dewatering unit GS 1000/200 6. control board ( new converter ) The line is ready for operation, date shortly in our workhsop Wuppertal-Germany. More regranulation-pelletizing lines ex stock available, ask for our actual machine-list or visit us

Collier sleeve Fishbone CPM 22-2.5 for pellet press

Pellet press 3-5 tons hour 2006 but very little used of the brand PTN 1100 150-300 Dutch make very very sturdy and very good condition with some spare parts, sale due to project dissolution

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly production Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly production Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly production Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly production Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly production Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg

We sell our until recently used pellet press, incl. control cabinet, drive press 2 x 22 kW, incl. conditioner and dosing unit frequency-controlled, incl. second set of roller wheels and various dies from Ø 4-8mm, built-in dies: 4x40 for animal feed; approx. 3500 kg/h feed - possible depending on input material

The pellet mill has been refurbished by us and is in as new condition. Die, roll assembly and V-belt are new. Engine power 2 x 110Kw The diameter 650mm Press width 105mm

Pellet mill / press CPM 7900 aftre renovation Dia inch : 30 - 762 mm Die width : 8 - 210 mm Die surface 5025 cm² KW : 250 KW Machine type : 7900 Buildyear : 1984 Width rollers : 215 mm Dia rollers : 350 mm 1 set rollers Oil cooling Twin mixer 2 x 15 KW / Die Hosting system New inlet in stainless steel

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg

Description: Composed of: . N°70 bags of LT FIREWOOD pellets of 15 kg each. 6mm pellet size, composed of 100 percent softwood. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,200 x 1,600 mm, weight approx.: 1,050 kg