We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,437 used machines on RESALE, but how to find them? Machine Search
used
Capper AROL – pre-threated plastic cork PCO 1881 4 capping heads Suitable for plastic corks PCO 1881 – 28 mm Speed: 8.000 BHP Counterclockwise direction Year 2000 Machine without electrical panel because it worked in sync with the filler
used
This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.
used
PET PREOFRM Injection Mold Hotrunner : PET Injection Mold Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set as well as cooling mould
used
Refrigerant: R407F; Class: 4BII;
used
Refrigerant: R407F; Class: 4BII;
used
Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...
used
• Corker AROL for pre threated plastic cork pco 1881: • Year: 2000 • Producer: AROL • Speed (BPH): 8.000 bph • Direction: Counterclockwise • Suitable for palstic pre-threated cork pco 1881 28 mm. • 4 heads. • Safety protections. • Code X 20
used
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
used
Preform Weight (Max): 30,5 g // Neck Type: PCO
used
Closing heads ALCOA for plastic screw caps pick-and-place PCO 28 mm tested and ready to work
used
Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...
used
Angebot / Offer: CMEC-HY Cap 48 Year: 2009 MOULD Cavities: 32x Closure Type: PCO 1810 standard Closure Weight: 2.5 gr Cycle time: 6 sec Hourly output: 19200 pcs Control: Siemens S7 Hours: 3200 hrs Dimensions: (LxWxH) 7.30 m x 2.40 m x 2.60 m
used
Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures
used
PET PREOFRM injection mould Hotrunner : PET injection mould Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set and cooling mould
used
Capping heads KRONES for plastic screw caps Pick-and-place PCO 28 - 1810 like new
used
SIDEL SBO 12 serie 2 blow-moulding machine for 12 moulds. Personalization for preform neck PCO 28. The manufacturing year is 2002 and the capacity is 15.000 BPH. Machine equipped with : - Preforms tipper & hopper - Electrical cabinet - Sidel control panel The machine is no more in production and is already professionally dismantled. The machine is in good condition. If you are interested by this machine, you can contact us by mail for further information and discuss about the availability.
used
PET-Filler, make: H&K, type: VVF112/14SV, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, built 1985
used
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2001 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
used
Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours
used
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
used
Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...
used
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
used
Overview The Triblock consists of a rinser, filler and capper and was manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine for the production of still and sparkling water or CSD. Techn. Details Capacity: 22.000 bph Worked formats: PET 0,45l & 0,66l Cap type: PCO 1881 plastic screw Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinsing machine with integrated recirculation system Filling with differential pressure system Filling machine equipped with star clutches with quick format change Capper equipped with quick format change Original mechanical filling valves brand Simonazzi Revamping of electrical panel with Siemens S7 E300 PLC Cap hopper not included
used
Bottling line PET ISO | 15.000 bph Year: 2001 – 2012 Blowing machine SMI SR10 | 2010 Formats of 05L-1L-1.5L Cap 28 mm PCO CORVAGLIA e 267 NOVEMBAL ALASKA 10 cavities Filling monoblock MELEGARI 50.70.10 | 2001 Rinser 50 clamps Filler 70 valves | isobaric Capper 10 heads Carbonator MELEGARI Labeller P.E. rollfed | 2012 12 heads Shrink wrapper SMI SK 600F | 2001 Handler SMI MAB 60 | 2001 Palletizer EMMETI | 2001 Air conveyors ZECCHETTI | 2001 Safety protections on all machines
used
PET-LINE 60N/95 complete system for preforms PCO consisting of: 1. PET Injection system Netstal PET 2000-3700 R 2. 60 cavity injection mould Otto Hofstetter AG (27 gr) 3. 60 cavity injection mould Otto Hofstetter AG (30,5 gr) 4. Dryer Piovan 560 kg/h 5. Air dehumidifier RPA 1200, 1200 m3/h 6. Compressor Aircenter SM 12, 60 m3 7. Water chilling unit Chiller CA1921MT 8. Water chilling unit Chiller CA0621MT Manufacturer: Otto Hofstetter AG Year of production: 2012 Installed power: 462 kW. Working hours: 7285 h
used
Qty. 1 Second-hand PET blowing and water filling line Mfc.: Tanner AG, SACMI, FT System, Krones & others Built: 2005-2013 Capacity: 12,000 bph on 1.5 L - Pack 3X2 16,200 bph on 0.5 L - Pack 4X3 16,200 bph on 0.35 L - 4X3 pack Product: Still and sparkling water Cap: 28 mm PCO 1881 Mould series: 3 sets of moulds for 0.35 L/0.5 L/1.5 L Note: The line is in production until the end of October 2023 Various new mechanical and electrical spare parts to the value of EUR 200 k are available with the line.
used
COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...
used
Preform Weight (Max): 32,5 // Neck Type: PCO
used
Overview The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l) Formats: 500ml, 750ml, 1.000ml, 1.500ml PCO 1881 Operating voltage: 400V/ 50 Hz Control voltage: 24 VDC Scope of delivery Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008 Preform feeder | Transver AG | - | 2008 Silo Elevator Sorting Chute
used
for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations
used
Complete automatic PET bottling line with capacity of 10.000 b/h, with 2 sets of tools for bottling 0,5L and 1,5L. PET LINE -Tikves Winery- Spec. Equipment Producer Type Year of prod. Capacit. 1 Preforms transporters M. TANNER 1999 15.000p/h 2 BLOW MOULD KRONES- CONTIFORM KBM8 1999 10.000b/h 3 Chiller for moulds KKT-Kraus KLC-s 38 N 1999 38KWhr 4 Air transporter KRONES- 1999 5 Unscrambler LANFRANCHI L1ST 1997 12.000b/h 6 OZONER for rinsing water BERTOLASO OM1002 1997 7 Monoblok Rinser+Filler+ capper RINSER BERTOLASO NV 1R 10 1997 10.000b/h FILLER ORTMAN+HERBST HANSA B B56/8Z-144 1997 10.000b/h CAPPER ZALKIN PCO 1997 10.000b/h 8 Bottles transporters KETTNER 1997 9 MIKSER ORTMAN+HERBST 1978--- 2005-Refurb. 15.000l/h 10 LASER PRINTER ALMARK 880 11 Labeller KRONES CANMATIC- WRAP AROUND 2002 10.000b/h 12 PVC Packer BAUMER 1997 12.000b/h 13 ...
used
Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods
used
Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...
used
QT 654 | Filling Monoblock PROCOMAC • Year: 2001 • Speed: 12.000 Bph • Model: HAL ADV 36.45.6 • Direction: Counterclockwise • RINSER • Number of clamps: 36 • Mobile nozzle • Single treatment • Filler • Number of valves: 45 • Type of filling: isobaric • De-gassing and sanification • CAPPER AROL Pick & place • Number of heads: 6 • Type of cap: PCO 1881 • Bottle formats: 300 ml Ø 59 H 205 600 ml Ø 68 H 238 • Machine reconditioned on 2020 • Safety protections
used
Filling Monoblock Cortellazzi 40.50.10 PET • Year: 1997 • Speed: 8.000 bph • Direction: Clockwise • Model: PET ISO 40.50.10 FINTEC VEGA • Formats: 0.5 LT | 1.5 LT | 2.0 LT • Rinser 40 clamps • Filler 50 valves | Isobaric filling • Capper 10 heads AROL | PCO 1810 • Safety protections
used
Used Blow Moulding Machine SIAPI EA20 120 2 Year 2004 1800 Bph AUTOMATIC BLOWER SIAPI EA20 120 2 2 CAVITA 2004 suitable for blowing PET bottles up to lt 5 from preforms complete with Automatic preform feeder Automatic preform orientator Machine electrical panel Mold and chiller excluded Production 1 800 bph Machine protections working Manuals available Working hours 25 000 Currently stopped in stock Neck type PCO 1810 neck 32 neck 30 25 Air recovery system present [...for more information send your inquiry to the seller.] refno: SO76
used
Type: 12/24/1, Year of construction 1997; Rinser - filler with neck-handling - capper (PCO 28 and sports cap); direction: right-left; formats: 500 ml + 1500 ml PET, for 28 mm PCO28. Dimensions: Rinser 1.500 mm x 1.500 mm x 2.750 mm; Füller 2.000 mm x 1.800mm x 2.850 mm; Verschließer 1.000 mm x 800 mm x 2.750 mm. The height is because of the security case around the machine. More then 300 machines new and second hand on our seema .de
used
01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...
used
Used Complete PET Filling Line 2001 Looking for a complete PET filling line to increase your production capacity We have just what you need a used complete PET filling line from 2001 that can handle up to 18 000 bottles per hour Here are the details of the line Blowing machine Krones Contiform S 16 year of manufacturing 2002 with air recovery system including preform feeding system Air conveyor Sidel year of manufacturing 2001 Tribloc Sidel Alsim 100 140 20 with 100 rinsing stations 140 mechanical volumetric filling valves and 2 head Arol plastic screw capper year of manufacturing 2001 This also includes a cap feeding system by Meyer Mixer GEA year of manufacturing 2001 Complete bottle conveyor system GEBO including conveyor lubrication system Labelling machine Krones Contiroll to label OPP labels from the roll by hot glue year of manufacturing 2003 Shrink packer and heating tunnel Krone ...
PET filler, Fabr. H&K, type: VVF112/14SV, with 112 filling valves, with 120 mm pitch, with 14-digit screw capper Fabr. Alcoa for PCO 28 closures, YOC 1985
used
Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000 Number of moulds: 18 Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881 Type of preforms: with recycled PET resin Machine was regularly maintained Machine equipped with: Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control
used
Ultra Clean Filling Line Krones 22000 bph for CSD in PET bottles - 2010 Complete ultra clean filling line for carbonated soft drinks, cider, water made by Krones and GEA in 2010. The line has been always serviced by Krones service and thus in excellent condition. Blow moulding, rinssing, filling and capping compartment of the line is ultra clean. All these machines are connected to each other’s and they are forming a closed ultra clean compartment where bottles are transferred without conveyors from machine to machine. Filling valves are sterilized with steam and the rest with Preracetic Acid C2H4O3 solution. Process department is made by GEA and it can produce various aseptic products and other beverages. Packing department has very versatile Krones Variopac Pro for shrink, shrink tray and carton boxing and a new in year 2015 Krones Robopox palletizer. Main Characteristics M ...
used
Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000 Number of moulds: 18 Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881 Type of preforms: with recycled PET resin Machine was regularly maintained Machine equipped with: Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storag ...
new
1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...
used
SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.
used
Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS
used
Used Blow Molding Machine SMI SR12 2007 This used blow molding machine manufactured by SMI in 2007 is a reliable and efficient machine designed for PET containers The model is SR12 and it is capable of producing containers with a format of 1 5 L With 12 cavities this machine has a high production capacity and can produce large quantities of containers in a relatively short amount of time One of the advantages of this machine is its preform loader preforms tipper and preforms unscrambler which help to streamline the production process and make it more efficient The preform loader automatically loads the preforms into the machine the preforms tipper tips the preforms into the mold and the preforms unscrambler helps to orient the preforms in the correct position for molding The preform neck type for this machine is PCO1810 which is a widely used neck finish for PET containers This blow mold ...
used
Used Blow Molding Machine Blomax 14 2004 For businesses looking to invest in a cost effective high speed blow molding machine we re pleased to offer a used KHS Blomax 14 model from 2004 This machine is specifically designed to produce PET containers and has a remarkable speed of 18000 BPH The standard mould hanger can cover bottlevolumes from 0 1 to 3 0 liters Special sizescan also be produced Equipped with 14 cavities and a range of features including a preform loader preform tipper and preform unscrambler this machine offers excellent value for money Additionally it has a PCO1881 preform neck type and air recovery system to improve efficiency This Blomax 14 is a rotary type machine and is currently in production making it an excellent option for businesses looking to expand their production capacity Although it doesn t come with a compressor or chiller it is still a reliable and effici ...
used
Used complete isobaric filling line Krones up to 32 000 bph Significantly the Used complete isobaric filling line Krones up to 32 000 BPH is a technologically advanced line Specifically it s designed for PET filling with water both still and carbonated and soft drinks CSD Impressively this used isobaric filling line offers an impressive capacity of up to 32 000 bottles per hour BPH combining efficiency and precision in the bottling process Main Component KHS Blomax Blower Central to the line is the KHS Blomax 18 blower achieving a maximum productivity of 32 000 B H Included in the equipment are a preform silo elevator and unscrambler plus an air recovery system Additionally a new touch HMI Human Machine Interface has been installed and the machine has been completely overhauled It has been adapted to work with a single type of neck preform e g 1L 30gr Preform PCO1881 and comes with a set ...