paul ernst used for sale

Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

Electronics / Board CNC cross-cutting system Paul 14E Y/O'A 1998

Paul Köster leak testing system for die-cast aluminium or cast aluminium housings in good condition. 2 city ions with workpiece carrier system for different tool holders. Connection option for compressed air and hydraulics directly on the workpiece carrier. Test container approx. 1600 x 2200 mm, depth approx. 900 mm. The system was used to test die-cast aluminium gear housings. Immediately available from stock.

Optimization cap seed PAUL, type 12 KE Automatic cademaege for saeging pre-programmed fixtures and fault caps after kreid marking Very little going on Top Condition

Very nice good working sawmilling for sale Very nice well maintained sawmill line for sale Consisting of: Log task 4 strands, Isolation, regular users and depositors, Fully hydraulic tensioner Mayerhofer, Sash gang saw EWD GDZ GE 71 (passage 71 cm) Riving knife, Cuttingsaw for boards (automatic) Roller conveyor with pullers, cross conveyor for trimming, Edger PAUL KME II - Spliter unit,, Roller conveyor, Kick-off conveyor . grinders Very well-kept LINE! READY TO WORK

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Multi-blade saw Paul K 34 O Complete cutting system with Paul 18 E cross-cut saw and K 34 O/800 GL multi-blade saw Year of construction: 12/1998 -Chain conveyor with lifting platform -Roller conveyor -Cross-cut saw Paul Type 18 E, 12.5 kW -Conveyor belt -Defect roller -Ejection station for cuts -Waste conveyor belt -Roller conveyor -Centering -Multi-blade saw Paul Type K 34 O/800GL, 90 kW, Working width 800 mm, saw blade diameter. 210 mm, 5200 rpm, Synchronisation machine, shaft diameter 60 mm Drip tray Roller conveyor Hydraulic pump 5.5 kW, Miscellaneous 5 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 50 mm Input lengths on the cross-cut saw: 1000 mm to 5000 mm or more Multi-blade saw: 350 mm to 10 ...

Eccentric press #5449 Stroke: 55 mm Ram adjustment: 8 – 96 mm Turn: 50 1/min Max force: 45 t Weight: 2550 kg

PAUL K30U/800

Multi-blade saw Paul Type K 34 G – OU/1200 Specifications: • Working width (mm): 1200 • Total power (kW): 47.6 • Saw shaft top: 1 • Saw shaft bottom: 1 • 5 saw shafts: included • 1 wave car: included • various spacer rings • Top rollers: with PU rubber coating • Bottom rollers: corded • Machine was technically overhauled about 1 year ago by the company Paul

– German production –DTR – optimization of cutting width – dripping cross saw – automatic blade spacing – year of production 1989 TECHNICAL PARAMETERS: .max. element width 920 mm .max. element height 90 mm .max. element length 6000 mm main engine power 37 kW disc diameter max. 300 mm spindle diameter 60 mm sleeve diameter 70 mm fixed sleeve with a length of 60 mm floating sleeve for 1 disc floating sleeve with spindle length of 100 mm number of measuring heads 15 measuring head spacing 350 mm distance between measuring heads total input power 10 kW cross-cut saw for cutting material for a length of 2630 mm saw leveling the material cascade for transporting the board hydraulic feed in smooth speed control hydraulic material pressure hydraulic material height adjustment

PAUL recutting saw type s-900-L with a passage width 906 mm, Cutting width 180 mm. The feed is infinitely adjustable 0- 90 m-min. The saw motor has 110 kW. Saw blade diameter 550 mm at 2500 rpm. With automatic feeding, Spreiselabscheider double-lamellig with pull-out tapes

Shaft diameter 40 mm Cutting height 125 mm Cutting width 750 mm Clearance height 130 mm Distance between upper rollers 600 mm Rotation speed of saw shaft 3300 rpm Power 55 kW Weight 1350 kg Dimention WLH 2000х2000х1500 mm

Transformer, control transformer PAUL PRENGEL (PREDÜ) PDT 0.1 ( PDT0.1 ) Ve: 400 V Va: 17 V 0.1 kVA Dimensions: 130 x 70 x 140 mm

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min.

Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.

Multi-blade saw Paul type K 34 G 2600 Specifications: • Working width (mm): 2600 • Engine power (kW): 37 • Top rollers: with PU rubber coating

Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included

Manufacturer: Paul, Type: Sägewelle K 1500, Diameter saw spindle mm: 100, Cutting width max mm: 1500,

Manufacturer: Paul, Type: Sägewelle, Cutting widht mm: 1500, Diameter saw spindle mm: 100,

Internal grinding machine, internal grinding device, internal grinding spindle, drum grinding machine -Manufacturer: Paul Eugen Mayer, internal grinding machine type PMB -Drive motor: Hanning 1.1 kW / 2810 rpm -Grinding spindle: Ø 100 x 140 mm / see photos -Support table: pivoting -Total dimensions: 580/500/H1180 mm -Weight: 99 kg

SPECIFICATIONS: Electric hot operation Work table size mm: 2500 x 1300 with intermediate plate 4 pistons, diameter mm: 90 Vertical stroke mm: 450

Manufacturer: Paul, Year: 1999, Type: Strangsäge, Control: NCK 3 , Program: yes, Cutting depth mm: 19 X 600, Working hight mm: 16-19, Positioning accuracy mm: 0,3, Feeding speed max m/min: 60, kW output saw motor: 5,9, wood lenght max mm: 3000, Saw Blade Diameter mm: 530, Year :1999

General SKU011U177 LocationBarneveld MakePaul Schwingel No.8183-3 Year of construction1986 Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume23120 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity23.120 Ltr Vessel sizesdia. 2400x4000mm Dished topcheck Dished bottomcheck Manholedia. 600mm Top connections6x dia. 100mm + 2x dia. 150mm Outletdia. 150mm + dia. 100mm Max. temperature65 Degr. C. Information Floorspace2,8x2,8 M Total height5,5 M Weight4800 KGPressure vesselsPaul SchwingelTanks > Pressure vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

Manufacturer: Paul, Type: K 34 M, Year: 1998, Arbeitsbreite min-max.mm: 1300, Arbeitshöhe min-max.mm: 40, Min.-max. working length in mm: 80, Saw Blade Diameter mm: 300, Tool adaption system: 30 Sägewelle, revlutions saw spindle rpm: 4500, Max. throughput width mm: 1500, Chipper: möglich, Power per saw kW: 4 X 4, Power feeding kW: 5,5, Feeding speed max m/min: 5-25, Positioning above axes: yes, Splinter protection: yes, Feeding system: Walzen, Year :1998

Manufacturer: Paul Mehrblattsäge K34G 800 , Type: K 34, Year: 2000, Arbeitsbreite min-max.mm: 800, Arbeitshöhe min-max.mm: 40, Saw Blade Diameter mm: 300, Working hight mm: ca.40, revlutions saw spindle rpm: 6000, Movable saws: no, Power engine kW: 30, Power feeding kW: ca.4, Feeding speed max m/min: 10-25, Splinter protection: yes, Feeding by vacuum lifter: mit Abschieber, Abstapeln mit : Rollenbahn, FREE TEXT: inkl.Ersatzsägewellen ca.8 Stück, Year :2000

General SKUR1133 LocationBarneveld MakePaul Schwingel GmbH (D) Type500 ltr No.963340 Year of construction1997 Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor6.8 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity550 ltr (nett 500 ltr) Vessel sizesdia. 800x1100mm Dished bottomcheck Flat top sidecheck With cover700x240mm With jacket(150 ltr) Max. temperature200 degr. C With anchor stirrercheck With paddle stirrercheck Motor6,8 kW 220/380 volt (Ex) Speed mixing shaft62 rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Weight900 Kg Floorspace1,3x1,2 M Total height3,3 M ATEX compatiblecheckStirring vesselsPaul SchwingelStirring vessels > Stirring vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working con ...

Manufacturer: Paul, Bauyeshr : 1989, Type: 12 MKE, Steuerung : Maxi X 3, Cutting depth mm: 44 - 150, Working hight mm: 19 - 75, Schnittgeschwindigkeit Frequenzgeregelt: yes, Work piece length max mm: 6500, Kw Leistung Sägemotor: 7,5, wood lenght max mm: 3000, Aufgabestationen: yes, Abfallförderband: yes, Saw Blade Diameter mm: 550, Optimisation: yes, Year :1989

Manufacturer: Paul, Type: K34 O/800 GL, Year: 2016, Alignment laser: 25 mW, Arbeitsbreite min-max.mm: 450, Arbeitshöhe min-max.mm: 26 - 52, Min.-max. working length in mm: 480 - 1.600, Saw Blade Diameter mm: 240, Working hight mm: 1.350, Cutting widht mm: 800, revlutions saw spindle rpm: 4.500, Diameter saw spindle mm: 60, Power engine kW: 75, Feeding speed max m/min: stufenlos, Inlet transport mm: 715, Year :2016

General SKUR0909 LocationBarneveld MakePaul Schwingel GmbH (DE) Type6300 ltr. No.8880-3 Year of construction1989 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8560 ltr ( nett 6300 ltr. ) Vessel sizesdia. 2000x3050mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connections5x DN150, 2x DN250 OutletDN150 Half coil jacketed(350 ltr) Max. temperature-30/200 Degr.C With paddle stirrerEkato HWL 100-D Motor15 kW, 380 Volt, (EX) Speed mixing shaft69 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L), Stainless steel 1.4541 (321) Information Total height4,9 M Weight5000 Kg Floorspace2,4x2,4 M ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsA ...

Paul Köster leak testing system for die-cast aluminium or cast aluminium housings in good condition. 2 city ions with workpiece carrier system for different tool holders. Connection option for compressed air and hydraulics directly on the workpiece carrier. Test container approx. 1600 x 2200 mm, depth approx. 900 mm. The system was used to test die-cast aluminium gear housings. Immediately available from stock. Special price free trucks loaded until the end of November 2023 on request.

CNC cross-cut saw Paul Type 18 E Specifications - Incoming wood length (mm): 2300 - 3500 - Wood thickness (mm): 27 - Wood width (mm): 80 - 600 - Type of wood: oak, beech unedged, kiln-dried, rough-sawn - Shortest sections to be sawn (mm): 2250 - Cutting width (mm): 78 – 220 - Machine frame: made of sturdy welded construction with 20 mm load-bearing walls - Machine hood: with viewing window that can be folded up, soundproofing (sound level < 85 dB (A)) - Cutting height (mm): 180, with saw blade diameter 800 - Note: Machine without control cabinet, as it was integrated into a machine line

Description: Machine number: 0031288 Operating voltage: 380 V Connection: 5.5 kW Pressing force: 1000 kN Projection: 300 mm Ram strokes: 100/min Adjustable ram: 60 mm Adjustable stroke: 10 - 100 mm Table dimensions: 900 x 590 mm Attention: the clamping tool located on the table top weight approx.: 5,700 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,500 mm

Optimizer PAUL 11 MKL - German production - year of production 2001 - full optimization - cutting cycle time 0.4 s main engine power 5.5 kW cutting width max. 180 mm cutting height max. 90 mm blade diameter 500 mm cutting cycle time 0.4 s max. material length 3500 mm min. material length 300 mm feed speed max. 200 m / min acceleration of 25 m / s2 automatic feeding system seven ejectors 4000 mm long cross chain feeder length of the receiving table 11500 mm stub diameter 2 x 125 mm

Multi-saw Edger PAUL K34V / 1000 / L 900/100 - after the technical review - very good condition - DTR - perfect for cutting boards - German production TECHNICAL PARAMETERS: cutting width 900 mm cutting height 100 mm 55 kW main engine 5 kW hydraulic pump motor hydraulic feed adjustment hydraulic height adjustment six upper pull rollers six lower pull rollers spindle rest max. blade diameter 350 mm spindle diameter 60 mm sleeve diameter 75 mm two rows of pawls transport dimensions (length / width / height) 400/185/170 cm weight ~ 2200 kg

Description: Machine number: 12965 Printing capacity: 250000 kg Feed size: 300 x 5 mm Belt infeed height (with plate): 125 - 315 mm Additional device: 2-hand operation Projection: 450 mm Installation height center dimension (without plate): 350 mm Clamping plate thickness: 110 mm Trunnion Ø: 65 mm Plunger strokes: 35 min. Adjustable ram: 80 mm Stroke adjustable: 20 - 140 mm Motor power: 20 HP Voltage: 380 V Lower table top dimensions: approx. 1200 x 850 mm Upper table top dimensions: approx. 750 x 330 mm With electronic roller feed: Dreher WAV-RDS-2E 1160B, serial no. 940059, year of manufacture 1994, feed 300 x 3 mm With reel straightening machine combination: BBT ABH 1100 / BRM 300, year of manufacture 2019, feed 300 x 3 mm With minimum quantity lubrication: Schmidt weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,210 x 3,000 mm

Paul KME2 edging saw for edging and splitting boards. Sample image, illustration similar., Roller width: 590 mm, engine: 45 kW, adjustment: hydraulic, More technical data: See PDF

Electronic module UNICONTROL EMV-SP 4b ERNST EMV-SP 4/5 10 MHz P 17. 1/3 Spare part for wood sanding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 160 x 108 x 32 mm

Electronic module UNICONTROL EMV-SP 6 ERNST EMV-SP 6/7 P 45/3 spare part for wood grinding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 160 x 108 x 32 mm

Electronic module UNICONTROL EMV-F 1e ERNST EMV-F1 10 MHz V 2 spare part for wood grinding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 160 x 108 x 32 mm

Electronic module UNICONTROL EMV-SP1B ERNST EMV-SP 6/7 P45/3 V 2 spare part for wood grinding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 160 x 108 x 24 mm

Thermal motor protection relay, motor protection switch SQUARE D CLASS 9065 TYPE TR1.4 1,4 - 2,1 A 220 - 660 V spare part for wood grinding machine PAUL ERNST KKB/K VBS1300x2500 !, among others used, checked ! Dimensions: 70 x 45 x 85 mm

Electronic Module, Display Module UNICONTROL EMC ANCE. A Ersatzteil u.a. für Holz-Schleifmaschine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 195 x 135 x 30 mm