used PADE Spindle moulders

Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â?? +45° Rotation-10° â?? +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Round End tenoner Manufacturer: Pade Model: TSU Tenon width: 4-100 mm / + pin thickness Tenon thickness: 4-30 mm Tenon depth: 10-50 mm Support tables 2 pieces for reciprocal work Support tables Tiltable

LINEAR MILLING MACHINE PADE UNIZE 6 number of aggregates 6 2 milling 2 x 7.5 kw engines 2 universal: milling or grinding 6.6/8 kw two-speed engines 2 grinding 3.7 kw engines included tool

Key data: 800 mm, 1400 , 2700

in stock, as good as new, with 12 months warranty -max. temperature 800 °C -Application temperature 750 °C -Heating time from 15 °C to 700 °C approx. 3-5 hours -Insert mass complete 2600 kg -Connected load heating 4 x 47.25 kW = 189 kW -2 compact fans -Furnace circulation capacity approx. 3,000 x per hour -Control zones 4 pieces -Program control IMAGO 500 -Touch panel TP 700 Color -Overtemperature controller -Thermocouple regulator 4 x NiCr/Ni type K; Class 1 -Thermocouple overtemperature 2 x NiCr/Ni type K; Class 1 Furnace volume 6.0 m³ Internal dimensions: Width (clear) approx. 1400 mm Depth (clearance) approx. 2700 mm Height (clearance) approx. 1600 mm Height of furnace base approx. 585 mm External dimensions: Width (without switchgear) 2300 mm plus switchgear approx. 500 mm Depth 3300 mm Height (with lifting door) 4200 mm (transport height 3100 mm)  ...

Working size 420x280x60cm With 4 spindles head

Pade MOD Oscillating Drill Number of drilling spindles: 2 Maximum bore size 100mm Maximum hole depth 80mm Maximum tool diameter 12mm 2 pneumatic material clamps Table adjustable at -20°/0°/+20°

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles

SECOND-HAND TWO BENCHES OSCILLATING MORTISER PADE MOD. MO - CE RULES - kw 3 - volt 400/50 - year 2007

Max tenon width: 100 mm + thickness Max tenon thickness: 30 mm Max tenon depth: 50 mm Table adjustments: vertical: 100 mm tilt on both sides: 15?/0?/-15? front tilting: +5?/-20? guide on table for mitre positioning cutter spindle motor: 3,7 kW motor for drum rotation: 0,4 kW dust extraction: 2 x 100 mm

PADE Trimming-Milling-Drilling Machine Model 1000/N: - Self-sliding worktop - Header blade D=400mm, 3 hp motor - milling machine with shaft D=30mm, motor hp 5 - 5-spindle drilling machine, 360° swivel, 3 hp motor Machine not according to CE standards, for export

COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

This PADE NS21 (2002) Drilling and Sawing Combination Machine was manufactured in 2003 in Italy. It has around 3,000 operating hours and can work with a machinable workpiece size of 2500 mm. It features the combination of a pair of end milling , circular saw with adjustable angle on both sides and group drill heads (to be considered that one head needs repair). As for the 2 axes, the vertical axis has a rotation capacity of 90 degrees and the horizontal axis has a tilt capacity of -10 to +45 degrees. The machine with documentation and CE certificate.

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Table dimensions mm: 1000 x 900 With drive system

According to the PDF prospectus!