We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 405)
used
Manufacturer: ULMA Type: ARTIC C YOM: 2009 Capacity: 120 rpm Product Hight Max: 160mm Product width max: 240mm El. specs: 6.5 kW, 10 A, 400 V, 50 Hz
used
There are two identical machines available, operating temperature: 250°C, connected load: 3kW, the heating regulators are defective.
new
horizontal bag machine Gekupack GK Industries Mini 260 New machine Packaging machine for pre-made bags: doypacks, block bottoms, flat bags, ... Suitable for confectionery, animal feed, powders, legumes, small iron parts, nuts, snacks, ... NEW MACHINE! Built in 2022 on behalf of the customer, but never delivered due to difficulties on the customer side. The machine is immediately available! Workspace: 130 mm - 310 mm bag width 130 mm - 350 mm bag length Achievement: approx. 15 - 20 packs per minute (depending on product and film material) Omron PLC - Panel, Relay, Temperature Controller HMI Panel 10" color display (touchscreen) Schmalz Vacuum Generator Panasonic Servo Drives Stainless steel Protection class IP 54 Power supply 220/230 V, 50/60 Hz Power approx. 2.2 kW Compressed air consumption 520l/min, 6-7 bar Supported bag materials: PE, PP, LDPE, PLA, k ...
used
Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130.
used
Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...
used
Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale.
used
The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...
used
Including documentation.
used
Record Panda1000 flow wrapper Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph
used
Product dimensions: 650-1200x300x240mm, roll width: 800mm, roll diameter: 350mm, max. speed: 50 cycle/min, length: 5170mm, width: 1452mm, height: 1435mm, weight: 1.1t, one band is torn and needs replacing.
used
PFM Flow wrapper Model: Tornado-BBLDSS Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph
used
Infeed height: 900mm, format: 35-220x15-120x4-30mm, max. output: 1500/min, including manual infeed conveyor, gap closing conveyor and turning and aligning conveyor.
used
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
used
Bag dimensions: 30-400x10-200x0-70mm, max. output: 250 bags/min, connected load: 4.5kW, length: 3000mm, width: 1075mm, height: 1600mm, weight: 900kg.
used
Redpack P200 Flow wrapper Serial: 660 Stainless flow wrapper, 5500mm overall length with 3500mm infeed, 300mm jaw width, max product height 120mm,
used
Max. speed: 90 bags/min.
used
Pentavac Penta2100 VFFS bagger 2007, vertical form fill and seal machine, 300mm jaw width, adjustable temperature controls, with printer, touch screen controls, with outfeed conveyor, belt width 280mm, belt height 950mm, with four different forming sets, with manual and box of spares, 3Ph
used
Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.
used
BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors
used
Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.
used
max. format 36 x 49 cm Year of construction 2015 Flow wrapping machine Touch screen computer control Insert height up to 120 mm Speed up to 28 m/min (idle) Feed belt without shrink tunnel Delivery date: immediately from stock Price on request. We deliver and install worldwide!
used
With documentation and some accessories, an on-site inspection is possible, but not under power.
used
Horizontal flow pack machine. This Flow Pack packaging machine consists main machine, coil unwinding group, conveyor belts for loading and unloading the products and control panel.
used
Compressed air supply: 6bar, connected load: 7kW.
used
Vertical 4-side sealing sachet machine suitable for dosing liquids. Machine comes without dosing unit.
used
Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.
used
Vertical packaging machines suitable for single portion packing of loose (powder, granules), liquid or small piece products into stickpacks, flat or pyramid bags. Foil width: max. 600 mm. Machine comes without dosing unit. Output: max. 40 bags/min. (depending on product).
used
There are two identical vertical bag filling machines available, weight: 1.1t.
used
Packaging machine Kallfass Universa 5050; good condition; cleaned and tested; Frame size 500x500mm; Passage height 100mm; with Tunnel Compact 650 S; Passage width 650mm; Passage height max.400mm; Cooling fans L-sealer Kallfass Universa 5050; good condition; cleaned and checked; frame size 500x500mm; product hight max.100mm; with tunnel Compact 650 S; working width 650mm; working hight max.400mm; cooling unit.
used
With documentation, an inspection is possible.