We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: a ...
automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t
Specifications Maximum pressure: 82 tons Year of construction: 2012 Pressing force: 97 tons/m² Number of bindings: 5 - fold vertical Trunking cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Weight: approx. 25 tons Power supply: 400 V/ 55 kW Bale binding: automatic Press capacity at idle: max 576 m³ / hour Press capacity under operating conditions: max 267 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9 tons/hour Theoretical throughput to density 60 kg/m3: approx. 14 tons/hour Theoretical throughput to density 100 kg/m3: approx. 21 tons/hour
Specifications Maximum pressure: 85 tons Pressing force: 103 tons/m² Trunking cross-section: 750 x 1100 mm Power supply: 400 V/ 45 + 30 kW Year of construction: 1992 Number of bindings: 4 - fold vertical Dimensions of the tailgate: 1020 x 1750 mm Weight: 26 tonen Bale binding: automatic ...
Maximum pressure: 95 tons Year of construction: 2008 Pressing force: 115 tons/m² Number of ties: 4-fold vertical Duct cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Power supply: 400 V/ 75 kW Bale tying: automatic Specifications No-load capacity: max 340 m³ / hour Theoretical throughput to density 35 kg/m³) 11.5 tons/hour Theoretical throughput to density 60 kg/m³) 20 tons/hour Theoretical throughput to density (100 kg/m³) 32 tons/hour Brief description of the features: • Open hopper allows filling with the conveyor belt • Knife on the press plate and on the frame of the press to cut off the excess raw material • Automatic r ...
1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material ...
baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg
automatic baler Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 485 kN (50 t) Specific pressing force: 6.4 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Total connected load: 92 kW, 175 A Throughput at idle: approx. 285 m³/h Throughput under operating conditions: approx. 125 m³/h Output at 35 kg/m³: approx. 4.4 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 1,250 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) ...
Paal 325F channel baler incl. conveyor belt Paal 325F BJ:2008 with. 27,390h operating hours Functional! Gebr. channel baler from the manufacturer Paal for sale. The system has been dismantled in working order and is ready for shipment in our warehouse. The system is offered with a filling belt for feeding the hopper. According to known product data, the total weight of the press including the filling belt is approx. 35t. If you are interested in this facility, please feel free to leave a message via our contact form. Condition: used condition, normal signs of wear present, functional, dismantled. Paal 325F Year of manufacture: 2008 with. 27.390h operating hours, working con ...
Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers ...