We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE
used chain conveyor belt Manufacturer: PAAL Type: KES 1750 Year of construction: 1993 specifications: Conveying width: 1,750 mm Feed length: 18,370 mm Riser length: 13,440 mm Drive power: 9.2 kW 2-speed speed Side bolster heights: 527 / 1027 mm ...
Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing ...
automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: a ...
1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material ...
baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg
automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t
used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat i ...
Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers ...