used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

used chain conveyor belt Manufacturer: PAAL Type: KES 1750 Year of construction: 1993 specifications: Conveying width: 1,750 mm Feed length: 18,370 mm Riser length: 13,440 mm Drive power: 9.2 kW 2-speed speed Side bolster heights: 527 / 1027 mm  ...

• more information

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material ...

• more information

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: a ...

baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers  ...

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

used residual roller saw Manufacturer: PAAL Type: RS 40 / 250 specifications: roll diameter: 400 mm roll length: 2,500 mm Saw blade diameter: 600 mm Drive power: 22 kW transport chain speed: 2.45 to 11.75 m/min. Throughput depending on roll length and saw cutting depth: 87.5 to 175 m/h housing width approx.: 1000 mm machine length approx.: 9000 mm Machine weight: approx. 2,400 kg