om used for sale

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

BBA GHP 100 BBA high pressure pump. This BBA pump with high head is suitable for many applications. The powerful Perkins engine is built into a sound-dampened housing. Max. capacity 225 m3/h Max. Head 78 mwc. Available with any connection you require. Are you unsure whether this machine provides the desired working point for you? or you would like more information about delivery options. Do not hesitate to contact us, we are happy to assist you!, , Throughput capacity: 225 m3/h, Max dirt passage: 30 mm, Max. head: 77 MWK, Max dirt passag: 2300 rpm, Weight: 2650 kg, , = More information =, , Applicable material: Water, Empty weight: 4.000 kg, Cargo space capacity: 3.750 l, Technical condition: good, Visual appearance: good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer info ...

Description: Semi-automatic horizontal film wrapping machine Rotation speed: 350 rpm Speed regulator: Omron Consumption: 0.36 Kw Film roll specifications: 100 mm wide, 23 micron thick Manual operation Adjustable speed Automatic start and foil cutting Horizontal roller conveyor with free-running rollers Vertically adjustable rollers to facilitate guiding of the packages Adjustable winding tension depending on the product to be wrapped Double unroller for working with 1 or 2 rolls of stretch film to speed up throughput Safety pedal for starting and stopping the machine CE approved Approx. Onsite Dimension. (l x w x h): 700 x 1,000 x 1,500 mm, weight approx.: 100 kg

Description: Travel - x 8300 mm Travel - y 950 mm Travel distance - z 700 mm BWO CNC900 control Profile length 8,000 mm Profile width 300 mm Profile height max. 300 mm Spindle speed 1 - 24,000 Drive power 100% ED 10.00 kW Drive power 40% ED 11.50 KW Tool holder HSK-E50 Feed X-axis 1 - 80,000 mm/min Feed Y-axis 1 - 60,000 mm/min Feed Z-axis 1 - 30,000 mm / min. A - axis +/- 90 ° Tool changing device 9 + 1 Cutter diameter 9x 75 mm Cutter length max. 9x 150 mm Saw blade diameter 1x 350 mm Total power requirement 25.00 kW Description: With BWO CNC900 ETH control unit with RC910 control panel, OMLAT high-frequency drilling spindle, 8 multifunctional clamping vices Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 3,000 mm, weight approx.: 13,000 kg

Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,

Standard machine - without program OMA Optical Measure Display (glass ruler) Air Table, Side Tables (1) - Cast Iron Electrical fault Machine is given away against packaging and loading costs Machine can be used as spare parts carrier or for repair. Due to high labour costs, a repair is not worthwhile in Germany.

SERAC GAIA filling and closing line for drinking vials, suitable for both liquids and powder ('Vitashots B12'). Comprises two connected filling machines, as follows: 1) GAIA R1V1/520 liquid filling machine with 800mm diameter rotary infeed table, Flexicon PD12L peristaltic filling pump (3 filling heads, filling range 0.2ml to 250ml), and 2 capping stations with vibrating bowl feeders for bung inserts. The cap currently run is a hollow bung, into which powder is dosed on the next machine, and pushed through the bung into the liquid using a pusher 2) GAIA RP1E1E1/520 powder filling and capping machine, with ENLFEX DS-80 auger filler, hopper and feeder inserter for small plunger (to press the dosed powder into the liquid), and cap hopper, feeder and press capper for the overcap. 16 station star wheels, with formats for vial diameter approx. 21.3mm and approx. 37.4mm highsingle elec ...

Control Fanuc 31i-B5 Speed [rpm] 24000 Travel X/Y/Z [mm] 500/400/400 Tools & Tools. BT30 Spindle: Speed 24,000 rpm Power (max.) 26 kW Torque (max.) 35 Nm Tool holder BT 30 NC Swivel Rotary Table: Technology Swivel rotary table with torque drive and counter bearing Type Häberle DTTiB Workpiece clamping zero-point clamping system, Fabr. Long General: Tool magazine 21 + 240 stations Clamping surface rigid table 650 x 400 mm Table load (max.) 400 kg Rapid traverse in X/Y/Z 54 m/min Automation: Technology Robot cell with carousel memory for tools and Workpieces Robot 6-axis robot Fanuc M20i Carousel storage 240 stations for tool holders, 135 stations for Workpieces Equipment/Accessories: Coolant management IKZ system with paper belt filter and high pressure, 60 bar Chip Management Chip Conveyor Workpiece Measurement Probe, Renishaw OMP 40-2 Tool Measuremen ...

Manufacturer: ELF Year : 1989 Equipment modified several times by the manufacturer Stoppil Number of heads : 6 adjustable units Type of products : Liquid / semi-liquid Type of packaging : Cans, bottles, jars, etc. Operation: pneumatic Filling: gravitational Stainless steel hopper + level sensor Raise/lower cylinder Drip tray Conveyor Product stop cylinders Electrical cabinet Flexible feed hose with valve Variable speed drive for 2 feed pumps. Omron PLC

Description: Various workshop equipment: .  , - N.1 Workbench with wooden top , 100 kg, 700x1000x1000 mm. - N.3 ionization units , 600 kg, ,2500x1200x2000 mm ( 3 ionization units each 1000 x 800x2000 mm, with tanks 200x1000 mm). - N.1 Electrical cabinet , 80 kg, 800x1200x1200 mm. - N.1 GALILEO ,ERGOTEST COMP 25 hardness tester, 100 kg, 600x250x1000 mm - , N.1 Chiller MTA TAE051 ,year 2001 , ,215 kg, ,1600x800x1600 mm (400 V, 50 Hz, 14 A, 7.8 kW, IP54, refrigerant  ,R407C, Maximum pressure 26 bar, maximum temperature 65°) - , N.1 FAC electric pallet truck , 800 kg, 1800x800x2000 mm (With battery charger) - N.2 workshop chest of drawers ,AMOS , 160 kg, 1400x750x1050 mm (each 80 kg, ,700x750x1050 mm) - N.1 MECATOOL workbench with drawers, 100 kg, 1400x800x1300 mm (including drawers) - N.1 Hydraulic equipment for handcrafted package  ...

CONTROLS   CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 640 mm   Y-axis travel: 250 mm   Z-axis travel: 400 mm   rotating range B-axis from: 105 °   rotating range B-axis up to: -105 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 °   distance spindle nose - table surface (max.): 450 mm TABLE   workpiece load (max): 60 kg SPINDLE / HEAD   spindle revolutions (max): 42000 /min TOOL MAGAZINE   number of positions: 90 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2400 mm   space requirements -front/back-: 2370 mm   ...

CONTROLS   PLC OMRON PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   shut height max.: 277 mm   ram adjustment: 80 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   nominal force: 6 kN   measuring wheel: no   band lubrication system: optional   band support rolls: yes DIMENSIONS / WEIGHTS   space requirements -left/right-: 1940 mm   space requireme ...

description: Line consisting of: KHS INNOPAL AS1H KHS INNOLINE PTR (pallet transport),BTR (bottle transport),GTR (pack\box transport) KHS INNOCLEAN EE 52/87 S22K FILTEC FT 49 RLD FILTEC OMNIVISION KHS INNOFILL EM(SVF)120/18 KK Heuft Spectrum TX HBBVXTI60 KHS INNOPAS PIISG 60-175 KHS INNOKET 2090/120-60 LM KT KHS-Metec Promecon 2000 KHS-Metec Promecon 4000 TAP TONE 500 KHS WrapAroundPacker TYPE 320/70 FILTEC OC-300 ARIES PACKAGING Type 906 ser 10 + SFT VWS 45 KHS INNOPAL LORD 2 BSN1 Robopac Robopac genesis DOMINO -520 DOMINO M-Series plus KHS 3-3000/34M Equipment YOM 2011: KHS Container Conveyor BTR KHS Pack conveyor GTR KHS Shrink Packer SP A-H KHS Carry-strip-master CSM 070-3 KHS Pack conveyor GTR Prices: 350.000 Euro for total, except 2011 equipment. 250.000 Euro for equipment of 2011 capacity: 50.000 b/h Besides buying and selling of co ...

Description: IMPORTANT NOTE - To be collected by Friday 17 May 2024 at the very latest. Motorspindle: 20-18,000 RPM Internal coolant: 40 Bar MPG: Heidenhain HR410 Tool changer: 32 pockets, chain type Renishaw OMP 60 Touch probe New guides and screws fitted in 2019 on X and Y See Video on https://www.youtube.com/shorts/qIozU-nCvkw z-motion: 520 mm, max. workpiece weight between centers: 350 kg, x-motion: 750 mm, y-motion: 520 mm, control: Heidenhain TNC 430, pallet table size: 700 x 500 mm, taper: BT40, toolchanger positions: 32, feed range: 20,000 mm/min, rapid motion: 50 m/min, total power requirement: 25 kW, weight approx.: 9,500 kg, Approx. Onsite Dimension. (l x w x h): 6,600 x 5,100 x 3,500 mm

Description: - Edge profiling, sanding and painting system - Serial number 03083 - Total installed power 117 KW - Working width from 200 mm up to 2500 mm - Workpiece thickness from 6 mm up to 80 mm - Minimum workpiece length 90 mm - Adjustable feed speed from 5 m/min up to 44 m/min - Power of the feed motors: 7.50 KW and 0.75 KW - Power of the machine opening motor 1.50 KW - Machine equipped identically on both sides with 9 units on each side: - 1 - Milling unit: adjustable in depth, height and inclination, motor 7.50 KW-6000 rpm - 2 - Milling unit: adjustable in depth, height and inclination, motor 4 KW-3000 rpm - 3 - Fine milling unit: upper and lower motor with 1.80 KW-12000 rpm each, tiltable up to 45° - 4 - Belt sanding unit: motor 2.20 KW-940 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad - 5 - Belt sanding unit for upper bevel: Motor 1.10 KW-930 rpm, swiv ...

Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg

Description: • 4-axis CNC machining centre • Serial number 521/0-511 5004757 • Total installed power approx. 18 KW • Useful working area approx. 2600 x 1150 mm • Maximum workpiece thickness approx. 100 mm • Maximum travel speed in the axes direction x-y-z-c: 75-75-30-60 m/min • C-Axis • Tool magazine with 6 positions •  ,OMLAT electrospindle: power 6 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder • Swiveling saw unit with 1.50 KW motor • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • SIEMENS SINUMERIK numerical control • Remote control panel • 6 consoles with 14 vacuum suction in total • 4 lifting modules for heavy workpieces • NASH_ELMO 2BL2041-2AH50-4A-Z  ...

x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used i ...

Full Automatic Form, Fill and Seal Packaging Machine OPAK MAKİNE QZ 1000 MAXI Packaging Product: Processed cheese + Bread Sticks Grissini Bottom Foil Material: PS, PET + PE, PVC + PE (300 mm) Top Foil Material: ALU+PE (280mm) Filling: Automatic Vacuum: 205 m3 DVP Italy (0.1 mBar) Capacity: 8-10 cycle/min Machine Dimensions: 8000x1400x2100 mm; Monoblock Chassis/ Independent Stations Chassis Material: AISI 304 Stainless Steel Mould Material: 7075 ve 5083 Aluminium PLC: OMRON (full-color touchscreen panel) (JAPAN) Pneumatic: FESTO (GERMANY) Electric: Telemecanique™ Schneider Electric Security: Emergency Stop button on Operator Panel and Chassis, Automatic stop switches for low air pressure. Circuit voltage: 380 V, 3 phases, 50 Hz Pressurized Air Requirement: 6 - 8 bar, Max 1600 L/min (Clean and dry) Chilled Water Requirement: 10 - 16°C refined from minerals, Neutral pH, ...