130,790 used machines on RESALE, but how to find them? Machine Search
Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm
A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18
A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveillanc ...
A deposit of €320.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Laser class 4 Pulse duration min 10 ns Wavelength 1064 nm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-14
Machine type: Tool & cutter grinder / Universal sharpening machine Manufacturer: Tacchella Model: 40 LR Year of manufacture: Unknown Grinding type: External / tool sharpening Machine design: Universal grinding machine with adjustable grinding head Table type: Cross-slide table with T-slots Axis movement: Manual X / Y / Z adjustment Grinding head: Swiveling grinding head for angular grinding Feed: Manual feed system Control: Manual control panel Speed selection: Multi-speed selector (visible) Power supply: 380 V / 50 Hz or 220 V / 50 Hz Condition: Used, visible wear and corrosion marks Remarks: Compact universal sharpening machine for tools, cutters and small components; suitable for workshop and maintenance applications Approx. own mass: 400 – 600 kg Approx. dimensions (LxWxH): 1000 x 800 x 1500 mm Auction-ID: A7-45364-10
Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 430 C Year of manufacture: 2014 Edge thickness: approx. 0.4 – 8 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 11 m/min Control: Electronic control system (Brandt / HOMAG control) Processing units: Pre-milling, gluing unit, end trimming, trimming, radius scraping, buffing Glue system: Hot-melt glue unit (EVA / optional PU) Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 20 A Full load current: 18.5 A Control voltage: 24 V Machine number: 0-261-04-6048 Remarks: One-sided edge banding machine for processing straight edges with automatic edge feeding and post-processing units; suitable for industrial woodworking applications :contentReference[oaicite:0]{index=0} Approx. own mass: 1700 kg Approx. dimensions (LxWxH): 4800 x 1200 x 1600 ...
Electric wheel loader, dual motor, 4x4 traction, equipped with bucket, forks and charger, never used Overall dimensions: 2700 x 900 x 1600 mm Weight: 1000 kg Auction-ID: A7-45834-70
Fast charger charger, Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-45834-39
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-65
Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-255
Fast charger Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-45834-274
Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-45834-49
Electric wheel loader, dual motor, 4x4 traction, equipped with bucket, forks and charger, never used Overall dimensions: 2700 x 900 x 1600 mm Weight: 1000 kg Auction-ID: A7-45834-15
Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-45834-158
Fast charger Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-45834-188
Fast charge charger Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-45834-104
serial number 117310074 Auction-ID: A7-46062-8
Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet
With 2x roller conveyor dimensions 3000x470x870 mm Auction-ID: A1-43429-93
40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12
Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1
Classic motorized bicycle equipped with Motori Minarelli \"Mosquito\" 48cc engine. Vintage vehicle intended for restoration or collection. It is sold in the condition it is in, without a functional check. The Minarelli Mosquito engine is a model recognized in the classic moped sector, which adds additional value to the whole. Status: - Used - Unverified operation - Possible signs of wear and use Note: On-site inspection is recommended. The lot includes only what is visible in the photographs. Keywords: motorized bicycle, bicycle with motor, classic moped, classic motorcycle, classic vehicle, Minarelli engine, Minarelli Mosquito motori, Mosquito 48cc, antique moped, vintage bicycle, collector's vehicle, restoration project, classic motorcycle restoration, antique vehicle, antique motorcycle, vintage moped, classic bicycle restoration, bicycle auxiliary engine, histo ...
Passenger car MERCEDES-BENZ E 43 AMG 4Matic Estate, former registration number GÖ-WR 42, EZ 08.03.2018, 181.1196 abgl. Km (04.05.26), 2,996 cc Petrol, 295 kW, EURO6, VIN: WDD2132641A437663, Exterior color blue, Aluminum rims AMG 19 inch with winter tires Michelin, Leather interior anthracite, Memory seats driver + passenger, Seat heating front and rear, Seat ventilation driver's seat, Sound system Burmester, Headup-Display, 2 keys, 1 previous owner, Papers available, Technical inspection 11/27
\" Inner micrometer set / internal measuring device in wooden box The set consists of a measuring head with scale drum as well as several extensions and adjusting/accessory parts. The extensions are marked with length specifications (e.g. 50 mm, 100 mm, 200 mm, 400 mm). Area markings such as \"5/54\" are attached to the parts. An adjustment dimension and other accessories are available in the box. Condition: Used. Optically with signs of wear due to age and storage Scope of delivery: • Inner micrometer / measuring head • Several extensions (see pictures) • Adjustment dimension • Other accessories according to the picture • Original wooden box \" Auction-ID: A7-46417-119
Universal Tool Milling Machine Manufacturer: AVIA S.A., Poland Type / Model: FNE 40 P Year of Make: 2013 Serial Number: 90567 Accessories / Scope of Delivery • Machine Vise • Tool Holders SK40 • Various Milling Tools and Clamping Devices • Documentation / Documents Dimensions (L × W × H): approx. 195 × 220 × 220 cm Weight: approx. 1,900 kg Table / clamping surface: • Clamping surface: approx. 800 × 400 mm • T-slot table • Max. table load: approx. 400 kg Travel paths / machining range: • X-axis: approx. 620 mm • Y-axis: approx. 420 mm • Z-axis: approx. 400 mm Spindle: • Spindle holder: SK 40 (DIN 69871) • Max. spindle speed: 4,000 rpm • Speed range: approx. 50 – 4,000 rpm, infinitely variable • Max. tool diameter: 125 mm • Max. tool weight: 6 kg Feeds: • Stepless feeds in X / Y / Z • Working feed up to approx. 2,000 mm/min • Rapi ...
\" Mahr Micromar Digital U-Gauge 0-25 mm, Type 40EWR-V Digital U-Gauge for outdoor measurements in the range 0-25 mm. Electronic version with ABS function and IP65 protection. Supplied in a plastic case with operating instructions. Device in very good condition. The measuring surfaces (anvil and spindle) are rounded (radius measuring surfaces). Device in very good condition, with no noticeable damage. Condition according to photos. • Manufacturer: Mahr GmbH • Series: Micromar • Type: 40EWR-V • Measuring range: 0–25 mm (0–1\") • Reading: 0.001 mm • Protection class: IP65 • Functions: ORIGIN (OR), ABS, HOLD/TOL • Display: Digital LCD • Spindle pitch: 0.5 mm • Power supply: Battery CR2032, 3V • Order no.: 4157045 • EAN: 4059192058609 \" Auction-ID: A7-46417-324
44× HSK-A63 Tool Holders mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled. The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-11
\" Adjustment / length measurement set – steel – 200–400 mm – in a wooden case Adjustment / length measures made of steel, stored in a sturdy wooden box. • Type: Adjustment dimensions / length dimensions / parallel dimensions • Material: steel • Quantity: 4 pieces • Lengths: • 200 mm • 250 mm • 300 mm • 400 mm • Holes: available (easy handling)\" Auction-ID: A7-46417-156
\" Lot of 6 pieces – Gauge size 400 mm + 3 Gauge holders + Accessories Part of the lot: • 1 × Gauge 400 mm (in a wooden box, Made in China) • 1 × Gauge Gauge 400 mm • 1 × Gauge Gauge 300 mm • 1 × Gauge Gauge 50 mm • 2 × Accessories/Clamping Elements \" Auction-ID: A7-46417-297
equipped with hydraulic line and front opening bucket / 4-in-1 bucket, operating weight: 8,475 kg, engine power: 68.8 kW @ 2,200 rpm Auction-ID: A7-46263-17
Axel cofiguration: 4x4; Mileage: 580 000 km; Auction-ID: A7-46408-20
\" Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made) Digital length comparator from Sylvac for measuring length deviations in industrial use. The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made \" Auction-ID: A7-46417-238
48× HSK-A63 Tool Holders mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled. The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-10
Operating hours: 11000 Engine power: 160 kW Total weight: 22,100 kg Auction-ID: A7-46408-1
Digital Indoor/Outdoor Clamp Clamp Kroeplin B440 Measuring Range 0–40 mm, Resolution 0.02 mm Digital Clamp Clamp from Kroeplin Length Measurement Technology, Type B440, suitable for internal, external and step measurements. The measuring device is delivered in the original box including documents. Condition: Very good optical condition, hardly any signs of wear. Measuring legs and mechanics without noticeable damage. • Manufacturer: Kroeplin Längenmettechnik • Type: B440 • Measuring range: 0–40 mm • Resolution: 0.02 mm • Display: digital • CE marking available • ...
Tool holders and clamping adapters for BAZ special tool holders and clamping adapters for machining centres of the STAMA-MC series (including MC 440). Stock: Mixed lot with approx. several tool holders, chucks, reducers and spindle adapters. Typical designs include: STAMA special adapter with bayonet/form-fit contour Chuck with slotted clamping heads Reduction adapter for STAMA unit interfaces Mounting elements for special tools Tool carrier with STAMA logo and part numbers (including 150 864 / 150 865) Auction-ID: A7-46417-30
\" Design: Zero adjuster / tool zero-point setting device Manufacturer: SAV Spanntechnik GmbH Type / Design: SAV 483.02 – Type NE 1 (for vertical probing) Condition: Used, visually very good. Dial gauge functional. No visible damage to the stylus surface or housing. • Reading accuracy: 0.01 mm • Height of housing / reference surface: approx. 49.5 mm • Height of springy sensing surface: approx. 51.5 mm • Housing diameter: approx. 68 mm • Diameter of sensing surface: approx. 45 mm \" Auction-ID: A7-46417-247
VOLVO FM 420 – Tipper Truck General data: Manufacturer: Volvo Model: FM 420 Year of manufacture: 2003 Engine: Diesel, 12,130 cm³ Power: 309 kW (420 HP) Transmission: Manual Drive: 6x4 Number of axles: 3 Color: White Weights: Gross vehicle weight: 33,000 kg Unladen weight: 12,250 kg Payload: approx. 20,750 kg Condition: Well maintained and regularly serviced Very good mechanical condition Ready for immediate use Description: Volvo FM 420 tipper truck in excellent working condition, suitable for construction and heavy-duty transport applications. The vehicle has been regularly maintained and requires no additional investment, making it ready for immediate deployment on site. Auction-ID: A7-46408-9
\" Gauge block set / Parallel gauge blocks – Long end gauge (used) Manufacturer: Längenmesstechnik GmbH Limbach Standard: DIN EN ISO 3650 Tolerance class: Class 2 All gauge blocks with through-holes, design as precision parallel gauge blocks. Condition • Used • Measuring surfaces visually good, with slight traces of use • Wooden cases with signs of wear and tear 4 individual longitudinal dimensions: 1. 200 mm – ID 3064 2. 250 mm – ID 3065 3. 300 mm – ID 3066 4. 400 mm – packed separately \" Auction-ID: A7-46417-205
\" Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made) Digital length comparator from Sylvac for measuring length deviations in industrial use. The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made \" Auction-ID: A7-46417-239
\" Permanent magnetic clamping plate Narex PERMAG 160/400. The magnetic clamping plate has a switch via lateral lever (on/off). The clamping surface is designed with a longitudinal pole pitch and is suitable for clamping ferromagnetic workpieces. Product: Permanent magnetic clamping plate Manufacturer: Narex Type / Designation: PERMAG 150/400 Origin: Made in Czechoslovakia • Clamping surface: 400 × 160 mm • Height: approx. 75 mm \" Auction-ID: A7-46417-166
- Producer Venjakob - Working width 1.350 mm - Gesamtbreite ~ 1.560 mm - Rollenbahnhöhe 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 85 mm - alle Rollen mit Gummioberfläche auf wunsch - Feed speed infinitely adjustable by hand wheel 2 - 6 m/min - Length 2.475 mm - Colour 7035, lichtgrau - Voltage / HZ 400 / 50 - Total connection power 0,25 kW - Location, in stock
- Producer Venjakob - Length 4.250 mm - Working width 1.300 mm - Overall width 1.510 mm - Working height 880 + - 20 mm - Heightnverstellbar - Belt control system - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,75 kW
toolchanger positions: 51 Auction-ID: A7-46300-80
Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN022408, AC adapter, without software, internal NBSBG012
Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN043256, AC Adapter, without Software
Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N R5Y00773, AC adapter, without software
Laptop FUJITSU Lifebook A544 Intel i5-4200M 4 GB RAM 120 GB SSD, S/N YLUA072052, AC adapter, without software, internal NBSBG018
CAD-PC FUJITSU Esprimo P420 Intel i3-4130 4 GB RAM Nvidia Quadro M2000 4GB 240 GB SSD, S/N YLTH185989, without software
Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN043244, AC adapter, without software, internal NBSBG022
maximum number of results exceeded
please refine your search
2.000 € 
