o h used for sale

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

Stack lifter Hunkeler AS 1000; Format 800x1200mm; Carrying capacity 1000kg; Hand or foot operation; Checks for function. Pile lift hunkeler AS 1000; size 800x1200mm; lift capacity 1000kg; Hand or foot switch; checked on function.

Press company Haendle PZG 56D/50

Vacuum Press Haendle type PZG 56A/40

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

The HERBOLD plastcompactor is a system for the agglomeration of films, fibres, chips, dust and flakes. Poorly free-flowing waste is turned into an agglomerate with a high bulk density and good flowability, which can therefore be applied directly to extruders and injection moulding machines. The plant for sale has a main motor with 110 kw drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA, and bioplastics can be agglomerated without thermal damage or discoloration. The system consists of the feeding device with silo, the compactor, a re-cutting mill with sifting and fine material return On request, a pre-shredding can be offered that is adapted to the task Tests can be carried out in our technical center for suitability tests and sampling. We are the manufacturer of this s ...

Blister machine Harro Hoeflinger model PFM 1 year of manufacturing 1992 . the machine has universal feeder , camera for product control . The machine has the following formats dimensions o blisters : 70 x 115 mm / 56 x 96 mm / 62 x 94 mm / 74 x 123 mm / 123 x 60 mm / 45 x 92 mm / 100 x 86 mm / 106 x 75 mm / 56 x 110 mm / 70 x 98 mm

EUROMETAL HGS 6×3200 NC hydraulic guillotine shears built in 2012 are used for precision sheet metal cutting with a maximum thickness of 6 mm. The machining process is performed by precision cutting knives with an option to adjust the gap between the blades while the upper cutting knife is mounted on a swing beam. This solution allows the machining of both steel sheets and workpieces made of non-ferrous metals. The simple design with efficient hydraulic system additionally ensures trouble-free operation throughout the entire lifetime, while at the same time maintaining the highest cutting quality. The EUROMET HGS 6×3200 NC guillotine shears weigh approximately 6600 kg. Technical specifications of the EUROMETAL HGS 6×3200 NC guillotine shears - maximum workpiece length: 3200 mm - maximum workpiece thickness: 6 mm - cutting angle: 1°30′ - stroke rate: 14/min - cutting blade l ...

HOF GT laboratory freeze dryer / Lyo (2,16 m2) for vials with „stoppering for completely inserting the bungs into the vials after the freeze drying process is completed, 6+1,shelves, usable shelf area 600 x 600 mm (WxD), distance of the shelves 6 x 110 mm, chamber capacity 645 litres, working temperature of the chamber from -80°C up to +80°C, working pressure of the chamber from +0,01up to -1 bar, electrics 400V/3Ph/50Hz, 37 kW, Siemens SIMATIC S7-300, machine floor space approx. 2420 x 1160 mm (WxD), machine height approx. 2620 mm, machine net weight approx. 2600 kg, including Containment-Cooling-Technology (EX-Zone 2, Temperature class T1) which is conform with the new EU’s F-Gas regulation, cooling medium R170 with a capacity of 1,3 kg and R1270 with a capacity of 5,5 kg, working pressure 23 bar

1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.

Sell two new (commissioning 01.05.2023) wood gasifier - pyrolysis plants (each 50KW electric and 120KW thermal) with immediate effect for health reasons. The systems are sold as a complete system with entry system, moving floor (Heizomat) and dryer (11KW) 250KW (cooler). At the moment, the systems are not running in continuous operation, as the heating concept could not be implemented for health reasons. The systems run reliably and can be controlled and monitored via a remote monitoring system. In addition to energy, about 1.5 to 2 tons of biochar or biochar are produced per month. If necessary, support can be provided during dismantling and assembly.

Number of punch stations 35 , output tablets 210,000/h , max. tablet diameter 13 mm , max. filling depth 18 mm , max. tablet thickness 8,5 mm , max. compression force 100 kN , max. initial compression force 20 kN , dieplate speed 15-100 rpm .

Moulded Cones Machine Steinhoff HWA 54 Steinhoff/GAM/Haas Price: € 9.900 Machines # 79 Built: 1972 Number of baking tongs 21 Products per baking tongs 6 Location: Germany The machine is used to make moulded cones is sold with a tool for tulip squirrels. It is the predecessor of the Steinhoff EWA 65. The machine is currently in storage.

Hünnebeck Topec, 408m2 Modular slab formwork from Hünnebeck for faster work. The Hünnebeck Topec system consists of two basic elements – panels and columns. Perfect results in just a few steps Easy to use Sturdy yet lightweight aluminum construction TOPEC compensation solutions make it easier to bypass columns and other obstacles Versatile use Hünnebeck Topec, 408m2 Modular slab formwork from Hünnebeck for faster working. The Hünnebeck Topec system consists of two basic elements - panels and props. Perfect results in just a few working steps Easy handling Robust and lightweight aluminum construction TOPEC leveling solutions make it easier to get around columns and other obstacles Versatile use

Flat waffle machine HAAS SWAK 64 Haas/Hebenstreit Price £75,000 Built around 1980 Location Germany Dimensions: -Height: 1500 mm -Height machine head: 2200 mm -Width: 1300 mm -Wide machine head: 1860 mm -Length: 12,000 mm Power supply: -Power: 4 kW -Power: 3x380 V -Number of baking plates: 64 -Engraving: 2.5mm x 0.5mm -Plate size: 460 mm x 290 mm -Leaf thickness: 2.8 mm-3.0 mm -Efficiency: 450-500 kg/8 h -Weight of leaf: 55 g/leaf -Baking time: 2:20 min Machine is sold together with the arc cooler and is currently in storage.

Hollow hip machine Haas EWB Price: £25,000 Machines # 3379 Built: 1975 Power: 10 kg/hour Connection power: 2.5 KW Volt 3x 380 Natural gas:? Location: Poland Dimensions -Length: 3.20m Bed: 1.70m -Height: 1.40 m The machine is used to make holhippets between 50 and 220 mm in length. The thickness can be adjusted manually.

Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

OFFFER OF THE FOLGENDEN ARTIKEL Number: SD001 Number: 1 apiece Shoe repair centre (cleaning machine, etc.) Factory: Hardo Type: unknown/no type recognizable Accessories: various accessories (see pictures) Dimensions above all: Width 1540 mm x height: 1790 mm x Tife: 790 mm State Note! See also the Foto/photos about the condition. Note! Only the described item is sold. Nothing else that can be seen in the pictures.

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

Cable Extension Sensors, Posiwire WS7.5-10000-HPROF-SB0, ASM, new Manufacturer: ASM Type: Posiwire WS7.5-10000-HPROF-SB0 Measure length 10000mm Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Manufacturer: Risco Intestinal holding device of the company RISCO: Intestinal holding device type RS 153 for filling machine RS 1040 , RS 4000, RS 4001, RS 5001 Extra accessories: holding rollers, filling tube, mounting kit Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko biala USt-IdNo.: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Haas HTRO D 200 G waffle squirrel Price negotiating matter Built in 2002 Location Poland Product: 110 x 47 mm, 23 ° Dimensions: -Height: -Width: -Length: Energy supply: -Performance: -Power supply: -Gas: Natural gas -Gas consumption: About 25 m ³/h -Number of baking plates: 100 -Number of baking courts per baking plate 2 -Engraving exterior: 6 x 6 mm -Plate size: -Core strength: 1.6 mm Machine is currently in production. Walterwerk/GAM/Haas

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

Used complete technological line for slaughtering pigs with a capacity of 80 pcs/hour The line consists of the following components: DIRTY PART - Feed pass 1.8 mb with spray and blocking - Restrainer box for BO-4AT deafening - Bleeding tub with rollers 4.5 mb - Conveyor mobile bleeding table - Consumable blood collection device UZK - 2 Z - Differential lift for bleeding track - Synchronizer - Three-shaft brush washer - Self-exuding loop lowerer - Self-pulling loop washer - Photo-cell sink - Single station knife sterilizer - Apron rinser - Hanging scaler 80 pcs/hour heated with steam - Loop extractor - Gantry sealer Super B 80 pcs/hour - Bristle conveyor belt 7 mb - Bath under the bristle brushing machine. - Hood over the bristle scalding set - Exponential table for brushing machine with air curtain - Tubular cleaning table - Bath under the  ...

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

GEKA HYDRACROP 55/S hydraulic ironworker machine built in 2008 in Spain, is a highly versatile and multifunctional machine that allows a wide range of workpiece machining. Its rigid, sturdy structure is equipped with 5 work stations, designed for the precise hole and corner punching, as well as shearing flat bars, angle bars and solid bars. Each work station is controlled by two hydraulic cylinders, which provide the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55/S ironworker machine weighs 1390 kg. Technical data of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade leng ...

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Labeler, floor labeler Herma GmbH Stuttgart Type Labelling unit PAX 230 V, 50 Hz very good condition, directly from production! 2 identical labelers available

This Rational UltraVent hood for Rational combi steamers, built in 01/2018 including connection kit, fits for the combi steamers CMP, SCC 61/101 gas from 2011 to the present ( index H+I ). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 4066 € net. The article is subject to the special regulation for used equipment: margin taxation according to § 25 a UStG. Our used equipment service for you: •6 months warranty on all electrical parts •Professional overhaul / inspection & expert cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected •Competent advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal This UltraVent hood has the patented condensati ...

NEW JOB CENTER! 480 HOURS TO POWER ON! COURSE AXIS X MM 1,000 COURSE ASSE Y MM 550 COURSE ASSE Z MM 500 TAVOLA DIMENSIONS MM 1.100x502 TAVOLA PLAN: 130-630 MM MAXIMUM LOAD ALLOWED: 700 KG ATTACK: BT40 GIRI/MIN VELOCITY SPEED 12,000 TOOL WAREHOUSE: 24 FANUC CONTROL 0i-MF COMPLETE OF TAVOLA 4/5th ASSE LEHMANN SOO EDITION 3

YEAR: 1988 HOURS: 12,000

DV EC 250 Pro Roof fan with EC motor and pressure control Roof fan with EC technology. Aerodynamically designed housing made of high-quality polypropylene in grey, diagonally blowing. Operating range from -30 to +80 °C. Integrated guide vanes for optimum efficiency. For horizontal mounting. Diagonal impeller made of aluminium, motor-impeller unit dynamically balanced. Electronically commutated DC outrunner motor with ball bearing for continuous operation. High efficiency even in regular operation. Maintenance-free and radio interference-free. Stepless speed control with the speed potentiometer P.. 10 (Accessories). In conjunction with the universal control system EUR EC (accessory), the fan can be used to control differential pressure, differential temperature or flow velocity. Dimensions: L=57cm / W=57cm / H=55cm Original price Fr. 2600.- 2 pcs. available

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

Diesel generator, power generator 250KVA, make Hitzinger with a Mercedes Benz 8 cylinder V motor on a trailer sound damping. A former Viennese networks plant, is in a flawless condition. Engine very clean, Starts immediately! Start and produce power, all OK, battery OK. Own control boxes with cell and cables for power supply. Short operating hours approx. 8,000,-

weight max. in kg: 2500 kg stroke: 4150 mm load center: 600 mm free lift: 150 mm construction height: 2814 mm fork length: 1200 mm fork holder width: 1150 mm Frame width: 1050 mm daylight opening: 110-1320 IK-IK mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ERMAK HGS 2600 X 6 guillotine shears built in 2006 in Turkey are designed for cutting sheet metal with a maximum thickness of 6 mm. The machine performs this process using precise cutting knives with an option to adjust the gap between the blades. The simple design, with an efficient drive system, further ensures trouble-free operation throughout its lifetime, while maintaining the highest cutting quality. The ERMAKSAN HGS 2606 guillotine shears weighs 5000 kg. Technical specifications of the ERMAK HGS 2600 X 6 guillotine shears - maximum workpiece thickness: 6 mm - maximum workpiece length: 2600 mm - number of strokes: 20/min - oil tank capacity: 150 l - motor power: 11 kW - power supply: 380 V - dimensions (L x W x H): 3395 x 1880 x 1550 mm - weight of machine: 5000 kg

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.

Compressor for sale: Hatlapa L15F

Case rounding machine Schmedt Model Prärund HHS17-45 Year 1989 Size 450 mm working width and spine width up to 100 mm Available direct

Fettbackstation / Berliner Backstation consisting of 4 fat pans 1x Donut Filler 1x large exhaust hood incl. fire extinguishing function

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR