nsm used for sale

width: 395 mm length: 2960 mm output height: 130 mm efective widths: 385 mm Pole center: 400 mm drive motor: Drehstrom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 liter can filler with sealer, rinser and dryer, filling height control by weight control, Additional title: 5 liter can filler, Filling capacity: 540 Cans per hour at 5°C beer temperature, Number of valves: 18 , Operation / Control: Control SPS S7, Features: Filler: SEN Rola built in 1985; conveyors SEN/self made built in 1985/2002 incl. seamer rinser and dryer: self made built in 2002; balance for filling height control by weight control, Code: 11586

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Article number: 14-16-002 Manufacturer: Ryder Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 2300x1000x2000mm Weight: approx. 500kg Suitable for grinding straight and conical grooves Max.center width: approx. 1200mm Max.tip height: approx. 100mm Max. grinding wheels Ø: approx. 200mm Groove width: approx. 1-12mm Grinding spindle speed: approx. 2800 rpm Conical adjustment: approx. +/-15 degrees Max.Groove Depth: ca.0-50mm Feed: manual Accessories  2 pieces of rotating tip  Work light Other accessories on request Price and other technical data on request

sheet width:2000 mm plate thickness:1.8 mm Controls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mm RAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mm DECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. diamet ...

unicraft Generator PG 800 TRA Product Name: Synchronous Generator Type: PG 800 TRA Manufacturer: unicraft Item number: 6701083 Year of construction: 2021 Condition: New technical details drive: - Drive motor: Honda GX390 - Starter: Hand start (wire rope hoist) - Fuel type: Petrol - Tank capacity: 11 liters - Consumption at 75% load: 2.2 l/h - Sound pressure level (Lp): 72 dB(A) - Sound power level (Lw): 97 dB(A) technical details power generators: - Type: nsm-ZR100-SC Synchronous - Rated voltage: 230 / 400 V - Apparent power at LTP: 5500 / 8300 VA - Active power at LTP: 4.9 / 6.6 kW - Apparent power at COP: 4100 / 7000 VA - Active power at COP: 3.7 / 5.6 kW - Protection class of the generator: IP 23 - Sockets: 1 x 230 V Schuko, 16 A / 1 x 400 V, 16 A - Protection class of the sockets: IP 44 - short-term power up to 3 times the rated power possible (LTP = ...

Power Supply NSM MAGNETTECHNIK MSJ 220/36 ( MSJ220/36 ) 220 V AC 185 V DC 36 A unused ! Dimensions: 180 x 150 x 170 mm

Overview This can filling line was in operation at a large German food company until last. The canning line is still assembled and ready for use. It is no longer in use as investments are being made in a new line.  Technical data  Capacity according to formats   150 ml Slim can - 18.000 cph  250 ml Slim can - 18.000 bph 330 ml Standard/ Sleek can - 15.000 cph  355 ml Sleek - 14.500 cph  500 ml Standard can - 11.000 cph  568 ml Standard can - 10.300 cph 900 ml King can  - 6.500 cph  Less than 3.000 operating hours  Carousel pitch circle diameter: 1,080 mm 24 filling valves Machine pitch: 141 mm  Single machines  Can Depalletizer | Krones | Pressant Universal 1A | 2020 Infeed at the bottom Discharge on top Includes safety fences, can conveyors, vacuum suction unit do identify damaged cans Empty Can Inspection | Krones | Cantronic 709 | 2021 Can Rinser | Meyer | Infeed Twiste ...

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...