Heading machine Baader 421 Condition: good Capacity: 28 fish per minute Water consumption: 12 l/min Staff: 1 person Dimensions (LxWxH): 1350x1000x1270 mm Weight: 660 kg  ...

• more information

This machine is designed for removing heads from the next fish species: cod, pangasius, catfish, and tilapia. Fish size range: 30 - 70 cm. Capacity: up to 40 fish per minute.  ...

• more information

The Breivik is a full stainless steel head-cutting machine for large fish. The machine is designed to be operated with fish of total length including the head, between 50 - 120 cm. Both smaller and larger fish may be processed successfully. Only bleeding fish must be used to obtain the correct placement for the head-cutting process. The fish is placed with the belly downwards and with the bled throat over the throat guide. Place the fish perpendicular to the throat guide into the body and tail carrier. The fish will then be driven towards the knife and the head will be cut and fall of to the right of the machine. The body will continue straight and over the top of the machine. Po ...

Condition: Good, working The Baader 51 skin-removal machine is designed to remove skins from the fillets of cod fish, heke, paltsus and red fish. The machine captures the skin from the tip of the tail without any incision. This provides a higher output of finished products. The width of the pipeline: 380 mm. The fillets are placed on a conveyor belt next to each other. Performance: 50-160 fillets per minute (depending on fillet size and operator skills) Power consumption: 1.5 kW Water consumption: 15 litres per minute The width of the work pipeline: 380 mm Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg

Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.

Kronborg KM Mark 5 Fish gutting machine Condition: Overhauled in 2021 The Jutland Kronborg Fish Gutting Machine is designed for gutting fish such as cod, saithe, haddock, whiting and hake on board trawlers as well as in land-based factories. It is also suitable for river types of fish like a carp. The fish is placed continuously in the feeding chamber, there a conveyor belt with catches transports the fish through a positional system of guiding plates to the gutting chamber. The rotating knife cuts the fish as required. After having been cut, the fish passes a rotating nylon brush and water sprays which remove the last entrails. The gutted fish is led to the outlet end for further t ...

Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184

Baader 184 Filleting machine for whitefish Filleting machine for whitefish Condition: Overhauled This machine is designed for filleting gutted and headed cod, saithe, haddock from 30 to 70 cm in total length (=0,3 - 2,5 kg, h&g) or depending upon the type of fish, also less than 70 cm. Time-tested Baader filleting system with high yield and operational reliability. The Baader 184 is equipped with an integrated skinning unit. Capacity: 24-40 fish/min Power consumption: 10 kW Water consumption: 25 l/min Dimensions: 6,15 x 1,70 x 1,50 m Weight (net/gross): 2550/2850 kg

Jeros 6015 TRAY CLEANING MACHINES  ...

• more information

product width 240-300mm product length 200-450mm film thickness 0.008-0.02mm two lanes production speed max 500 pcs per minute machines are almost unused  ...

• more information