niro soavi used for sale

Used Gea Niro Soavi homogenizer model NS 3110/90 H, Ariete version. Year of construction 2006. Technical details: Manufacturer: GEA Niro Soavi Model: Ariete NS3110/90H Type: Piston homogenizer Viscosity : < 200 cP Operating temperature: < 80°C Execution : Sanitary / aseptic Max. capacity: approx. 10,000 L/h Flow rate: variable Maximum back pressure: 20 bar Motor power (supply required): 90 kW Number of stages / homogenisation level: 2

Stock # U2419-1 Used piston homogenizer by Gea Niro Soavi (IT) model NS1002H. Working output up to 200 l/h. Pressure up to 150 bar. Machine has single stage homogenizing head and is belt driven by el motor 2.2 kW, 940 rpm, 220-240/380-420 V, 50 hz. Mounted on mobile wheels. Last time used in food industry.

Used GEA Niro Soavi Model Ariete NS3015 H stainless steel homogenizer. Capacity approximately 200 liters/hour (528 US gallons per hour) at maximum pressure 1500 bar (21755 PSI), 1-stage, 3 pistons. Pump valves material: Tungsten Carbide (WC), plungers material: solid ceramic. Homogenizer is driven by an electric engine 15 kW/400V/50 HZ. Overall dimensions 1120 mm (length) x 1350 mm (width) x 1500 mm (height). Weight : 1300 kg. Manufactured 2014.

Length: 1750mm, width: 1675mm, with documentation.

Niro atomizer Type: F 160 Feed rate: max 50 t / h Weight: 450 kg Country of origin: Denmark

capacity: 5.000 l / h

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity.

2 pieces NIRO belt conveyor belts - Length: approx. 2,000 mm - Width: approx. 600 mm - height adjustable The belt speed can be changed

General SKU065E266 LocationBarneveld Main Features MaterialStainless steel Motor44 KW Inlet diameter210 mm Specified Features - Spray dryer Spray dryerRotary atomiser for spray dryer (1x) Atomiser dia.160mm Motor44 KW, 500 Volt (2940 Rpm) MaterialStainless steel Information Mounted on framecheck Floorspace1,0x1,0 M Total height2,8 M Weight1050 KGSpray dryersNiro AtomizerDryers > Spray dryersBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU061H241 LocationBarneveld MakeGEA TypeNS3015P No.6097 Year of construction2006 Pressure Working pressure125 Bar Main Features Capacity1180 Ltr./Hr. Motor11 KW Pressure125 Bar Specified Features - Piston homogeniser MaterialStainless steel Piston homogenisercheck Capacity1180 Ltr/Hr Number of pistons:3 Piston stroke60mm Motor11,0 KW, 400/690 Volt Information Weight1000 KG CEcheck Floorspace1,5x1,2 M Total height1,4 MPiston homogenisersGEA NiroMills > Piston homogenisersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Year of construction1995 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX compatiblecheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Year of construction1996 Main Features Motor1.35 KW Specified Features - Tumbler mixer MaterialStainless steel Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU225P203 LocationBarneveld MakeAeromatic AG Verfahrenstechnischer Anlagen- und Apparatebau (CH) TypeT-5 No.879028 Year of construction1987 Main Features MaterialStainless steel Motor15 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan mounted on wheels(2X) Pan sizesDia: 1070x770x500mm Capacity±150kg With sprayercheck Can be heated by steam(4 bar) With fancheck Capacity1,2 m3/S Motor15kw (Ex) With dust filtercheck Mechanical cleaningcheck MaterialStainless steel Information With switchgearcheck(as is) Floorspace1,8x1,5m Total height+/- 6,0m Weight±2700kg ATEX compatiblecheck Extra Specificationswith heat exchanger Brunner AG, Series no. 41479, Build 1987, Capacity 18.5 Ltr, Working pressure 12.3 bar, Max. temperature 200 Degr. C. Technical specs Extra informationpan dimensions 1070 x 770 x 500 mm Fluid bed dryers batchNir ...

General SKU144P678 LocationBarneveld MakeNiro Atomizer (Patterson Kelley) Type20 CLS ZZ + LB+P Year of construction1990 Technical specs Capacity17000 liter/hour Main Features MaterialStainless steel Motor8.6 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixer-agglomerator (1x) Continuous mixercheck Diameter550mm Length/Depth1750mm, Agglomerator Dia. 950x850mm Inlet400x400mm Outlet600x320mm With motor7,5/8,6 KW, 660 Volt Speed mixer20 Rpm With liquid injectioncheck With lump breakercheck With motor15 KW, Screw dosing (no motor) MaterialStainless steel 1.4301 (304) Information Floorspace4,1x1,4 M Total height2,1 MTumbler mixersNiro AtomizerMixers > Tumbler mixersBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU304P677 LocationBarneveld MakeNiro T.K.Fielder Limited (U.K.) TypePP1 Pharma Matrix Year of construction1994 Main Features MaterialStainless steel Volume10 Ltr. Motor3 KW Specified Features - Universal mixer Universal mixercheck Capacity10 Ltr Vessel sizesdia.280mm x200mm With covercheck Inletdia.20mm With motor3,0 KW, 240/415 Volt (EEx-d IIB T5) With variable speed drivecheck Rotor speed300-1500 rpm With lump breaker/ granulator With motor0,55 KW, 240 Volt (EEx-d IIB T4) Rotor speed1500/3000 rpm With timercheck MaterialStainless steel Information Mach.No.8255 Mount.on stainless steel framecheck With switchcheck With switchgearcheck Floorspace1,0x0,8 M Total height1,6 M ATEX compatiblecheckUniversal mixersNiro FielderMixers > Universal mixersBrand > Niro Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced p ...

General SKU224S098 LocationBarneveld MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 No.43164 Year of constructionUnknown Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel Information Mounted on mild steel framecheck Total height3,2 M Weight1800 Kg Floorspace4,7x1,6 MFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU222W220 LocationBarneveld MakeNiro-Fielder Main Features MaterialStainless steel Volume25 Ltr. Motor5.5 KW Specified Features - Universal mixer Gral-granulatorcheck Capacity25 Ltr. Vessel sizesdia. 400x200 mm With covercheck Inletdia. 32 mm (2x) Pneumatic operated outletcheck Outlet150x150 mm With jacketcheck With motorcheck 4/5,5 kW 380 Volt Rotor speed243/486 rpm. With lump breakercheck With motor1,3/1,8 kW Rotor speed1500/3000 rpm. Information Mach.No.90,765 With switchgearcheck Floorspace1,3x1,0 m Total height1,6 m Weight740 kgUniversal mixersNiro FielderMixers > Universal mixersBrand > Niro Fielder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

General SKU201W009 LocationBarneveld MakeGEA Niro Pharma systems TypeMultiprocessor No.02563.0010 Year of construction2003 Pressure Sprayercheck Main Features MaterialStainless steel Volume12 Ltr. Motor11 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity6 and 12 litre Pan sizesDia 120x480 mm and Dia 170x280 mm With pumpcheck Can be heated by steamcheck With fancheck Capacity580 m3/h Motor11 kW (400V Ex) With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications- Complete technical file (total 21 folders) - Complete system, including heating system, filters, control valves - Can be used in cleanroom Fluid bed dryers batchGEA NiroDryers > Fluid bed dry ...

Mit 31 Kunststoffplatten und Dichtungen, komplett mit Armaturen und Anzeigen 2 Edelstahl Endplatten und Hand-Anpresshyraulik.   Anzahl Platten max: 60 Plattenformat: 600x600 Maße ca. 270x80x150 cm Abstand zwischen erster Platte und Spindel ca. 100cm More then 300 machines new and second hand on our seema .de

Technical details Manufacturer: GEA Niro Soavi Model: Ariete NS3110H Type: Piston homogenizer Viscosity : < 500 cP Maximum particle size: up to 500 microns Operating temperature: < 90?C Execution : Sanitary / aseptic Max. capacity: approx. 15,000 L/h (variable capacity from 5,500 to 15,000 L/h) Flow rate: variable / fixed / multiple Maximum working pressure: 200 bar Maximum back pressure: 5 bar Minimum in feed pressure range: 4 to 6 bar Motor power (supply required): 110 kW Power supply: 3 ph / 400 V / 50 Hz Water supply: min 2 bar Air supply : min 6 bar Product temperature : < 90?C Cleaning temperature : < 140?C Cleaning cycle : 30 min Sterilisation temperature : 140?C Number of stages / homogenisation level: 2 Plunger diameter: 85 mm Plunger stroke. Piston stroke : 100 mm Options added by the manufacture ...

Used piston homogenizer. Producer: Gea Niro Soavi Model: Ariete NS3075 Year. 2011 Maximum pressure: 20MPa Capacity: 10000l/h A complete control cabinet with inverters is included with the device.

Alfa-Laval,New Plate Heat Exchanger Niro-Inox. Type A 15-BWFDR-1.730KW,with 189 plates,141m2, compact. Type MK 15-BWFDR 1.526KW,with 282 plates,128,8m2 Type MK 15-BWFDR,1.730KW,with 150 plates,68,1m2.

Stephan Shredding Machine Type: MCH-D 60A or MCH-D 30 Machine almost complete Nirosta Product-contact parts 100% Nirosta Power: Approx. 45 KW Product output approx. 2000 Kg hour MCH-D 30 Product output approx. 4000 Kg hour MCH-D 60

We have for sale a Vacuum Evaporation Plant: The plant consists of: -3-stage vacuum evaporation system VV 75 KDB -Down-flow evaporator Condest 13 K-Niro Technical details available upon request. Vacuum evaporation is a process that has been used by the large-scale chemical industry for decades. Using vacuum evaporation systems allowed (for the first time) utilizing the advantages of this process also in small and medium-scale applications. Vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection. It is used to treat under vacuum aqueous solutions that contain pollutants. Typical fields of application include: - Recover electrolytes from electroplating - Keeping a uniform rinsing water quality in static rinsing tanks - Volume reduction of sewage wate ...

Technische Daten: - Arbeitsbreite der unteren Leimwalze 450 mm - Arbeitsbreite der oberen Leimwalze: 250 mm - Arbeitsbreite der oberen Druckwalze: 150 mm - Durchmesser der Walzen: 2 x 140 mm - Auftragwalzen und Dosierbehälter bestehen aus dem Nirosta Material - Auftragsmenge: 150 - 200 g/m2 - Gummihart: 70 Shor - Geschwindigkeit: 20 m/min - Leistung: 2 x 0,25 kW - Steuerspannung: 24 V - Schutzklappe - mittels Hebels und Excenter wird die Leimauftragsmenge geregelt - der Leimbehälter und die Auftragwalze werden zum Reinigungszweke einfach aus der   Leimauftragmaschine herausgenommen - auf der Eingangseite sind zwei Rollen mit Durchmesser 50 mm - auf der Ausgangseite sind zwei Axen mit Scheibenrollen (nicht angetrieben) - die Leimauftragmaschine ist sehr Stabil - CE Konformität - Gewicht 300 kg Option: - Geschwindigkeitsregulierung 5 - 50 m/min

Cleaning and glazing cabin in Nirosta version, with KSB water pump 2.2 kW, exhaust fan 3.0 kW (incl. exhaust pipe 600 mm ), lighting, rotary table and control cabinet. Completely dismantled ready for transport.

Glazing and cleaning booth in stainless steel, with KSB water pump 2,2 kW, suction fan 3.0 kW (incl. Exhaust tube 600 mm Ø), lighting, turntable and switchgear cabinet. Dismantled, ready for transport.

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

6000 l, Niro, insulated, weighing, Further: 20000l insulated, inside rubberized, RW 6000 l Niro insulated

Barrel pump,stainless steel,Lutz Niro 40,460 watt motor

Coater/fluid bed,stainless steel,Niro type Combi Coata II,electric heating,20 l product container

sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...

sheet width: 2100 mm plate thickness: 6,0 mm ST 42 thickness at Niro-steel: 4,0 mm VA cutting angle: 1,2 Grad no. of strokes: 28 Hub/min oil volume: 150 ltr. down holder: 11 Stück control: CYBELEC CybTouch engine output: 11,0 kW back stop - adjustable: 1.000 mm table height: 800 mm weight: 4.500 kg range L-W-H: 3.010 x 2.100 x 1.640 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws ...

sheet width: 3100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm down holder: 14 Stück no. of strokes: 20 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC CybTouch weight: 5500 kg range L-W-H: 4.000 x 2.100 x 1.640 mm total power requirement: 11,0 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 1,25 mm ST plate width at 30 kg/mm: 2,0 mm ALU thickness at Niro-steel: 0,8 mm VA daylight opening: 100 mm bending angle max.: 135 ° height: OW 100 mm total power requirement: manuell weight of the machine ca.: 350 kg. dimensions of the machine ca.: 1715 x 750 x 1400 mm Furnishing: - Split upper, lower and rear tool - Height of the upper tool = 100 mm Division 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual back gauge 500 mm - mobile The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including s ...

sheet width: 2600 mm plate thickness: 8,0 mm thickness at Niro-steel: 5,0 mm down holder: 12 Stück no. of strokes: 18 Hub/min oil volume: 200 ltr. cutting angle: 1,5 ° engine output: 15,0 kW weight of the machine ca.: 6.300 kg range L-W-H: 3525 x 2350 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6,3 To. range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4,1 x 2,2 x 2,19 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 28 Stück no. of strokes: 18 Hub/min oil volume: 260 ltr. cutting angle: 0,5 - 2 ° control: CYBELEC Cybtouch engine output: 22,0 kW back stop - adjustable: 1000 mm range L-W-H: 6100 x 2580 x 2460 mm weight: 15.100 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6300 kg range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer  ...

sheet width: 1275 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 3 kW weight of the machine ca.: 875 kg range L-W-H: 1,7 x 1,68 x 1,1 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Piece counter: Squaring arm: Support arms: The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensio ...

sheet width: 3100 mm plate thickness: 6 mm thickness at Niro-steel: 4,5 mm daylight upper clamping: 100 mm Bending angle: 0 - 135 ° total power requirement: 7,5 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 4,5 x 1,72 x 2 m Electric 380 Volt: manuel back gauge adjustable from the front: 70 - 600 mm Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 20 mm distance between columns: 3100 mm no. of strokes: 6-8 Hub/min table height: 880 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 500 l cutting angle: 2,7 ° thickness at Niro-steel: 13 mm rear stop: 200 mm/sec. total power requirement: 37 kW weight of the machine ca.: 23 t dimensions of the machine ca.: 4,15 x 2,49 x 2,6 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created w ...

sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

Microcut/ continuous cutter, colloid mill. High-performance machine for use in continuously operating process lines. Product - Mounting funnel: capacity 30 liters completely in V2A Nirosta stainless steel, 3 different perforated discs - inserts and 5 sets - knife blades

sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm blade length: 200 mm angle adjustable from - to: 30 - 120 Grad no. of strokes: 60 Hub/min oil volume: 60 ltr. table:: 1000 x 800 mm total power requirement: 2,62 kW weight: 800 kg range L-W-H: 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 Hub/min oil volume: 310 ltr. cutting angle: 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 12200 kg range L-W-H: ca. 4100 x 2300 x 2235 mm -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...