swivelling range: 250 mm max. working diameter: 210 mm max. working lenght: 555 mm control: Fanuc 18i TB spindle taper: JIS A2-6 spindle diameter: 71 mm number of spindle speeds: 5.000 U/min CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with bar loader (Profimat) Equipment/accessories: - Bar loader - driven tool holders Further technical data: - Chuck size: Hainbuch collets - Distance between spindle end faces: 555 mm - Max. outside diameter for bar material: 65 mm - Spindle power 1 = 11 / 15 kW - Spindle power 2 = 7.5 / 11 kW - Max. torque: Nm 265 (kgf-m 27) The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - ...

spindle passage: H: 65 / G: 51 mm numbers of positions in the tool changer: 2x12 control: FANUC 18i-T tool taper: BMT55 collet chuck: Hainbuch (RD65) CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of  ...

First installation year 2010 - Bar capacity 52 mm - The machine has always worked with oil - Equipped with Lns Sprint S2 barfeed, front magazine type, and a lot of accessories (for both lathe / barfeed) - Fanuc 31i-A Control.  ...

• more information

This Nakamura-Tome WT-100 MMY Lathe was manufactured in the year 2018 and has 18000 production hours. It is equipped with a Nakamura-Tome control unit. ...

• more information

Nakamura Take WT 300 MMY. 2 turrets. 2 twin heads. 9-axis controlled turning and milling center. Facing headstock machine. Upper turret with Y axis with +- 60 mm. Lower turret with C-axis driven tools. Both turrets with 12 stations each and all of them motorized. Possibility of setting with 24 tools in each turret. Motor power of both heads 15 Kw. Power of milling motors 5,5 Kw. Speed of both heads 4.000 rpm. Speed of motorized tools 5.000 rpm. Bars loader of 1,5 meters. Interface for any brand and model of loader. Front bucket type parts collector installed in the door. Rear parts collector gantry robot type with 3 Kg. capacity clamp. Cutting power 320 N/M ...

NAKAMURA WT 250 CNC Fanuc, Series 16i-T Main spindle, counter spindle 1 tool turret with driven tool stations + 1x Y-axis 1 tool turret with driven tool stations 2x C-axis Conveyor Bar loading magazine IEMCA TS560P The machine is energized in our warehouse in Gussago BS.  ...

• more information

Machine Details Stock number 1105-03772 Machine type CNC lathe Brand NAKAMURA Type SC 250 Year of construction 1998 Control type CNC Control FANUC 21 IT Storage location FRANCE Country of origin Japan Delivery time by arrangement from location Freight Base EX WORK Technical details Turning diameter 300 mm Turning length 500 mm Control FANUC 21 IT Turning diameter via slide 250 mm Speed 5000 rpm Rapid traverse 22 (X,Z) m/min Drive power 6.5 kW Information VERY GOOD PRESERVED MACHINE WITH FANUC 21 IT 3 axis machine with C AXE DRIVEN TOOLS WITH RIDING STOCK + HOLDER APPROX. 12 STUCCO 4 DRIVEN

This NAKAMURA TOME WT 250 Lathe machine was manufactured in the year 1999. It is equipped with a FANUC Series 18i-T Control Unit. Drilling and milling work possible over the entire circumference with one clamping. The tools and holders for driven tools are not included in the scope of delivery. ...

• more information

Live tools on all turrets (12 positions each turret) Y axis on all turrets High pressure system with cartridge filter - max 18 bar, swarf conveyeor TECNOFORME Auto shut off Bar loader interface Type G pick-up arm for sub-spindle including conveyor belt for finished parts External cleaning blow for spindle and counter spindle Internal cleaning jet with coolant for counter spindle Polygoning Monitoring of cutting forces and tool life Navigator system for fast search of the piece zero, work clamping, N° 1 collet chuck Hainbuch SPANNTOP ASA 8 GR. 80mm - main spindle, N° 1 collet chuck Hainbuch Axfix ASA 6 GR. 80mm - couter spindle, tool holders, Set of tool holders Marchetti consist ...

CNC multi-tasking lathe NAKAMURA SUPER NTX-S Reference No.: 18038 Mfg. year 2007 S/No. V300901 FANUC 16i-TB Luckbei-dialog system supercap Maximum turning diameter -Upper turret 390 mm -Lower turret 300 mm Maximum turning length 1,100 mm Max cash working capacity 65 mm Milling spindle AC 18.5/11 kW Milling spindle maximum speed 12,000 rpm Capto C6 Servo controlled B-axis, 230° Y-axis 160 mm ATC with 40 tools Main and sub spindle AC 22/18.5 kW Main and sub spindle maximum speed 4.500 rpm 12/24-station turret, all stations for driven tools Maximum speed of driven tools 3,600 rpm 2 off. 3-jawchuck 210 mm, SCHUNK Coolant tank 250 liters High pressure pumps Swarf conveyo ...