We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our ...
Circulating air chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and run-inchins Demonstration device, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs per 20 segments freely programmable -NtLog for controller Record data via USB stick -Temp. Uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air volume flow 125m³/h -Additional equipment: Motor-closing fresh air and exhaust air flaps Entry rails -Connection power 31.2 ...
Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper ...
Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.
Chamber furnace Manufacturer: Nabertherm Model: N161 Year of construction: 2000 temperature 1200 C kW: 30 A: 43.4 Hz: 50 V: 400 N: 3 Combustion chamber dimensions: approx. 54 x 40 x 85 cm Overall size oven: approx. 120 x 170 x 200 cm Weight approx. 950 kg verm. 6,955 operating hours Control: Controller C 40 An instruction manual is available for the control
Vertical tempering furnace Electric 1280°C Nabertherm N5000/S Used high chamber furnace, overhaul possible on request - Tmax 1280°C - Capacity 5000 liters - External dimensions w x d x h 1600 x 2200 x 4000 mm - Net weight 7000 kg - Rated power 198 KW - Documentation Viewing possible by appointment at any time.
We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 H ...
We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (acc ...
We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional e ...
We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available With safety system for solvent-based substances according to DIN 1539 -Inside w x d x h 1000 x 1000 x 1500mm -Outside w x d x h 1900 x 1430 x 2315 mm -Capacity 1500 liters -Tmax 260°C -Controller P570/ 50 programs each 40 segments freely programmable -NtLog for controller recording the data via USB stick -Air circulation 3600 m³/h -Exhaust gas volume min. 390m³/h -Additional equipment: drive-in rails -Connected load 39 KW -Weight 1150 kg -incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appoin ...