Code 151301 DESCRIPTION Gear Hobber Ø 250 x modul 6 Make Modul Model ZFWZ 250/3 Serial number 112 625 Year ± 1983 Ma. Workpiece diameter 250 mm Max. modul 6 Max. axialmovement 275 mm Max. tangential movement 100 mm Max. gearangle setting 45 degrees Max. diam. millingcutter 145 mm Max. millingcutter length 170 mm Diameter clampingtable 275 mm Diameter tablcenter positioning 200 mm Distance millingcutter to clampingsurface min/max. 195 – 470 mm Distance middle millingcutter to center table 20 – 230 mm Millingspeeds in steples in 2 Ranges 20 – 200 rpm 125 – 400 rpm Feeds axial 0.2 – 100 mm/wheel ...

weight of the machine ca.:4 t  ...

• more information

max. wheel diameter: 250 mm gear width: 275 mm max. module: 5 table diameter: mm weight of the machine ca.: 5 t change gear, internal cutting head, normal head and tangential head. Video Link: http://www.youtube.com/watch?v=90urAqbFCTI Photos: https://picasaweb.google.com/104950607176033391845/ModulZFWZ3000X30MmG earHobber The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter with ratio 1:10: 300 mm workpiece diameter with ratio 1:1: 212 mm max. number of teeth: 200 min. number of teeth: 6 x-travel: 300 mm X - Axis speed: 0,1-5.000 mm/sec. y-travel: 400 mm Y - Axis speed: 0,1-5.000 mm/sec. A - axis: -170 / +170 ° control: Siemens Sinumerik 840 C total power requirement: 38 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4,20 x 2,20 x 2,10 m incl. suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)

Gear hobber MODUL ZFWZ 2000x20/II Year: 1978 Max work diameter: 2100mm Table Size: 1800mm Max. D.P .: 20 Arbor diameters: 6: Ø60 (x2), Ø40 (x2), Ø32, Ø80 Change wheels: Yes Weight: 40 tons Gear hobber MODUL ZFWZ 2500/3 Year: 1980 Max work diameter: 2500mm Gear Width: 850mm Table Size: 1800mm Max. D.P .: 22/27 Diameter of hole in the table: 700mm Hob vertical traverse: 850mm Arbor diameters: 6: Dia. Ø60 (x3), Ø80 (x2), Ø50 (x1) Coolant tank: Yes Change wheels: Yes Tail stock: Yes Engine: 48KW Length: 7000mm Width: 3000mm Height: 4000mm Weight: 44500 kg

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested un ...

Under current  ...

• more information

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm ...