mmb used for sale

speed and feed infinitely adjustable; milling motor power: 2x 6.7 Kw; equipped with chip discharge conveyor, control box and accessories; disconnect with flexible hose; The entire body must be professionally dismantled by the buyer, and must provide his own means of transport

capacity: X - 2 approx. 750mm; Y-axis: 18000mm; Z-axis 200mm; A- 360°; B- 360°; milling unit 1a-1b power: 9 Kw; 2a + 2b: 6.7 kw; equipped with 2x 6 tool changing magazine; discharge conveyor, control box, 2 vacuum pumps; 1 SCHMALZ vacuum lifting aid with vacuum pump on aluminum crane track; 1 rack with vacuum plates and 2 pallets of spare parts; The entire body must be professionally dismantled by the buyer, and must provide his own means of transport

for stringers / spindles and steps; C= +-400°, B= +- 190°; 3 milling motor 2x 6.7 Kw, 1x 1.9 kw; variable speed, frequency converter: 2x22 Kw; equipped with NUB 15" touchscreen; 1 Becker vacuum motor; rack with vacuum blocks, chips, discharge conveyor and accessories; disconnect after the flexible hose; The entire body must be professionally dismantled by the buyer, and must provide his own means of transport

speed infinitely adjustable; equipped with 2x 4 vertical milling units, motor power: 6.7 Kw; 2x 1 vertical drilling unit, power 1.5 Kw; 2 racks with vacuum plates; 1 vacuum pump; control box and control console and VACUEASYLIFT with vacuum pump and hanging rail construction; including 1 pallet with accessories; The entire must be professionally dismantled by the buyer, and must provide the means of transport himself

(Dual setup); commissioned in 1997; speed infinitely adjustable: U-355mm, V-355mm, continuous up to max. rapid pass X,Y: 40000mm/min, Z: 15000 mm/min, U,V: 20000 mm/min; milling motor power: 6.7 Kw; saw blade ø 360mm, 2820 U/min, power 8.5 Kw; equipped with chip discharge conveyor belt with elevator conveyor; 2 foot controls; vacuum pump and control cabinet; including accessories; The entire must be professionally dismantled by the buyer, and must provide the means of transport himself

FOR SALE ALFA LAVAL MMB 305S-11 TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MMB 305S-11 SEPARATOR AT OUR STOCK IT IS IN GOOD RUNNING CONDAT?ON . IT WHAS USED AS GAS OIL SEPARATOR PLS FIND SPECIFICATION BELOW. MODEL MMB 305S-11 YOB & SERIAL No. 2008 / 4170832 BOWL NO. 548715-01 CURRENCY 60 Hz MADE IN SWEEDEN READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Alfa Laval MMB 305 Skid

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Control: WINDOWS Num Rotos plus 2.7 Operating hours: 82771 Technical data Number of axis total: 6 Axial motion: Crosswise: 360 mm Longitudinal: 240 mm Vertical: 240 mm A axis (grinding head rotaion): -15 / +25 ° B axis swivelling range: + / -120 ° B axis resolution max.: 0.0001 ° C axis (spindle,resolution): 0.0001 ° Max forwarding speed: 10 m/min Max. forwarding speed cross: 10 m/min Max forwarding speed vertical: 10 m/min Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3265 mm Width: 2920 mm Height: 2810 mm Various accessories: Wheel trueing attachment Oil mist extractor: DONALDSON MMB Loading roboter: ADEPT

Paint shop Fabr. WAGNERYear of construction 1998consisting of:A) Paint / suction wall with filter system size 5000 x 2000 mmB) electronic 2K mixing and dosing system WAGNER TWIN CONTROLC) gun flushing deviceD) AivCoat spray gunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Torque wrench make STAHWILLE type manoscope 721 NF / 80Fabr -No: 202318024Scale range: 160 - 800 NmScale range: 120 - 600 ft. LbScale division: 20 NmScale: 20 ft. LbSocket Square: 3/4 B 46.5 mmB 76 mmTotal length: 1040 mmWith- triggering- comfortable setting- double stop signal- Double scale Nm / ft. lb- Left suit by removable square- Protection of all sensitive parts by the robust steel tube in aluminum U profilevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Holz-Schleifmaschine VENJAKOB VBS 1300 x 2500 B.: 1989 Sanding width: 1300 mm Sanding height: max 150 Table width: 1550 mm Working length: 2500 mm Table height: 1000 mm infinitely variable feed Two grinding units 2 x 4,8 kW An aggregate does not have a brush. used, checked ! Dimensions: 2900 x 2200 x 2800 mm It is a brush grinder: Brush wear: 100 mm Brush diameter: 270 mm Flextrim brush set Brush speed: 960 1/min shaft diameter: 80 mm

with 2 Fotzellen for autom. Umreifen, frame format 1000 H x 600 mms of B, roller race powered 55-cm height of the ground, 4 steel roles at the entrance 4 roles at the exit, for PP tape format 12x0,63-0,65 mmRollenkern 200 mms / 280 mmBand tensions 100-700 N380V, 50 hertz

Sheet thickness: 2,00 mm Bending length: 1020 mm Number of rolls: 3   MACH-id   5016 MAKE        Huvema Holland TYPE          HU 1020 x 2 YOP             2011 SPECIFICATIONS Hydraulic / Mechanical         Mechanical 3 or 4 roll      3 roll Bending length        1020 mm Max. Rolling capacity Ø 2.500        2  mm Top Roll Ø75 mmBottom Roll Ø  75 mm Side Rolls Ø    75 mm Power      0,75 kW DIMENSIONS Length       1600 mm Width         1000 mm Height         1200 mm  

Bending capacity: 3.5 mmBiegeleistung (VA): 2.5 mmBiegelänge: 2030 mmMotorleistung: 3.7 kWGrundausstattung and features: upper beam and bending flange on both sides about hydraulic angetriebenWinkel the upper cheek 45 ° PositioniersteuerungManuelle BiegewangenverstellungKlemmdruck of the top clamping, hydraulic, for both sides, Central regelbarManuelle UnterwangenbombierungStandardwerkzeugsatz (engine included) consisting of from:-split upper cheek tool portable 3 foot switch with a separate emergency rash button lower beam rail bending beam rail Backgauge 600 mm, manually verstellbar-CE - compliant

Capacity: 35 t Folding length: 1200 mm CNC Brand: Delem CNC Model: M - 51 MACH-id   3969 MAKE        Baykal TYPE          APH YEAR         20.. SPECIFICATIONS Controll   Delem M-51 Pressbrake / Folding / Mech. / Hydr.   Pressbrake      Hydraulic / Mechanical     Hydraulic Bending length     1200 mm Distance between column   1070 mm Press force    35 Ton Throat    410 mm Stroke    60 mm Die height    470 mm Backgauge stroke X in mm500 mmNumber off controlled axis3Power4 kWDIMENSIONSLength1250 mmWidth1270 mmHeight2150 mmBaykal CNC Pressbrake

Vertical Boring Mill Fabr. ALZMETALL Type ABOMAT 35Machine No: 313 Year 198617155 operating hoursDrilling capacity in steel ST 60: 45 mmDrilling capacity in cast GG 20: 60 mmDrilling capacity steel ST 60: 60 mmThread cutting steel ST 60: M 42Thread cutting Cast GG 20: M 60Long spindle with cross wedge fracture: MK 4Discharge: 330 mmTable mounting surface: 560 x 450 mmBoring stroke: 700 mmRapid traction motor n = 150 min: 1.1 kWFeed motor: 0.25 kW n = 3000 minRapid traverse speed: 4.75 m / minFeed: 0.04 / 0.05 / 0.07 / 0.10 / 0.14Feed size optionally: 0.20 / 0.28 / 0.40 mm / revDrive power: 4.0 kWSpindle speed: 56-2500 rpm.Weight approx .: 1300 kgWith- 6-spindle head ARBO 30No. 139, built in 1989used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

Automatic corner cleaner / Corner cleaning machine make MURAT type CA 762Fabr. -No: 114371, year of construction 2004Max. Profile height approx: 120 mmMax. Profile width approx. 120 mmBore diameter of the router: 32 mmConnected load: 2.2 kWExternal dimensions of the machine L x W x H: 1120 x 700 x 1350 mmWeight of the machine: 330 kgAir consumption: 12 l / minRequired air pressure: 6 - 8 barused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deep hole drilling machine make TBT type T10-500Machine -No: 410 311 053 built in 1980Technical specifications:Max drilling depth: 500 mmDrilling range in steel: 3 -12 mmBoring max. 15 mmMin.spindle speed: 2520 1 / minMaximum speed of the work spindle: 8000 1 / minInfinitely variable feed: 8 - 160/35 - 320 mm / minRated speed continuously variable transmission: 5.9 - 53 / 11.8 - 106 1 / minControl range: 9Rapid traverse speed: 3 m / minCenter height above ground: 1150 mmCenter height over bed: 230 mmCenter height over table / slide: 180 mmTable dimensions: 420 x 1030 mmTable grooves design and size: DIN 650/4Coolant tank min / max: 590/670 ltrTotal connected load: 9.0 kWExternal dimensions: 3400 x 1700 x 1800 mmWeight approx: 2500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are n ...

Radial drilling machine make VEB Schmölln Bowes type BR 40x1250/1Machine -No: 691354Technical specifications:Drilling capacity in ST 60:40 mmDrilling capacity in GG 255 mmProjection: 1250 mmDrilling depth: 355 mmClamping area: 1450 x 920 mmRemove drilling spindle - base plate: 375 x 1375 mmBoom height adjustment: 750 mmLateral movement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range 6 x: 0.063 - 0.63 mm/revConnection value of the machine: 4.7 kWRequired space: 2050 x 930 mmHeight of the machine Transport height / max boom above: 2800 /3200 mmWeight approx.: 3000 kgColor greenwith- Dice table- new electricsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for you ...

Radial drilling machine make CSEPEL type RFH 75/2000Year of construction 1982Technical specifications:Drilling capacity in solid/steel: 75 mmDrilling capacity in solid/cast: 90 mmBoring in steel: 125 mmBoring in cast: 140 mmTapping steel metric: 60 mmTapping cast iron metric: 70 mmsmall/large Projection: 440 / 2000 mmVertical boom height adjustment: 950 mmQuill stroke: 380 mmSpindle mount: MK 521 speeds: 19 - 1900 rpm.12 feeds: 0.047 - 22 /revColumn diameter: 450 mmBase Size: 2200 x 800mmDimensions: 3220 x 1130 x 3400mmWeight approx.: 7000 kgwith- Drill table 1000 x 800 x 750 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal cleaning plant make BUPI-CLEANER type 5 HFabr. -No: 8022 Year 1980Inside dimension: 1500 x 1500 x 1000 mmBasket size: 1250 x 1250 mmWater content: 300 - 500 lMax. Heating temperature: 70 °Heating time of the car wash approx. 1 hr.Spray pressure: 4.3 barCleaning time approx. 10 - 15 min.Drive power: 7.5 kWHeating power: 9.0 kWDimensions L x W x H: 2000 x 2000 x 2400 mmWith- Time thermostat- Flap door- Access car with 2 basketsused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rapid radial drilling machine make GENKO type ATB 30 SYear 1972Drilling capacity i. ST 60:25 mmDrilling assets i. ST 60:32 mmSpindle mount MK 3Quill stroke 150 mmDistance spindle / base smallest/biggest 620 / 1800 mmRadial arm adjustable vert. 1180 mmMovement horizontally on carriage mot.: 1900 mmMovement of the boom hor. 600 mmBoom rotatable by 360 °Spindle head tiltable on both sides up to 45 °14 spindle speeds 22 - 1920 rpm.3 aut. Feeds 0.1; 0.2; 0.3 mm / rev.Drive power 1.5 kWWeight approx 1.5 tExternal dimensions approx 3350 x 700 x 2800 mmWith- aut. feed- hydr. central locking- Tapping device- motor stroke movement- central hydr. clamping- motorized travel = 1900 mm on base carriageused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ple ...

Parts cleaning machine make AUTOP PERKUTE type JET 82 TFabr. -No: 177471 Year 1981Technical specifications:Basket diameter: 785 mmusable height: 630 mmBasket load capacity: 500 kgContainer capacity: 130 lPower of the pump: 2.0 kWHeating power: 6,0 kWPower connection: 380 V / 50 HzWeight approx: 250 kgWith- mobile- Heater- powered basket- Nozzles from above and from the sideusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush Deburring Machine Fabr. RSA Type STL IIIMachine -No: BIII 3-7262, built in 1986for pipes, profiles, solid material and sheetsWorkpiece diameter: UnlimitedBrush diameter: 250 mmBrush width: 60 mmOperating and protection: S 6-60% IP 44elec. Connection: 380VConnected load: 2/3 kWSpeeds by pole-changing motor Engine: 1500/3000 rpm.External dimensions: 650 x 450 x 1150 mmWeight approx: 75 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet deburring machine make KUNZ type K 2Machine -No: 3126Max. Sheet thickness: 8.0 mmBrushes: 2Brush diameter: 300 mmMotor power: 2 x 2 kVADimensions L x W x H: 1000 x 700 x 600 mmWeight approx: 150 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type ST-No: RG II 48-1902, year of construction 1991for pipes, profiles, solid material and sheetsTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds thanks to pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgColor greenWith- base- brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine, make RSA, type Rasamax MonoMasch. -No: R-M-38/3305 built in 2000Technical specifications:Material thickness from: 1 - 6 mmSheet thickness: up to 6 mmSheet width: 100 to 1,000 mmSheet length: 100 to 1,000 mmSheet shape: sheets with notches, straight cut sheetsMaterials: steel, stainless steel, NEMax. Brush diameter: 250 mmBrush speed: 1500/3000 rpm.Drive power: 1.0 / 1.4 kWPower connection: 380 V, 50 HzDimensions with base: 400 x 500 x 1300 mmWeight approx: 50 kgWith- Base cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type STLMachine -No: RG III 071628 built in 1990for pipes, profiles, solid material and sheet metalTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds through pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgwith- several new replacement wire brushesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Wide belt sanding, brush deburring and grinding machine make GRINDINGMASTERType MCSB / B2 1300 make -No: TN 1431-04 built in 1991Working width: 1300 mmBrush size: 1300 x 300 mmSanding belt size: 1900 x 330 mmMax. Material thickness: 150 mmPower of the contact roller: 16 kWPower of the stainless steel brushes with oscillating oscillation: 15 kWPerformance of the stainless steel brushes Mit- u. Counter-oscillation: 15 kWContinuous flow rate: 3 - 18 m / minAir requirement: 70 l / min / 6barDimensions L x W x H approx .: 2200 x 3000 x 2200 mmWeight approx. 2500 kgWith- 3 deburring stations- wet execution- Dryer- FilterfliesanlageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Tiller-guided electro-hydr. Tool lift Fabr. BAKA type EGV 60/605Masch. -No: SOE 27555 built in 1998 with drive Load capacity: 700 kgTable size: 1400 x 600 mmretracted height: 800 mmextended height: 1100 mmStroke: 300 mmBattery power: 24 VDead weight: 400 kgOutside dimensions approx: 1900 x 600 x 1100 mmWith- Battery 24Velec. Travel drive- Emergency stop switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Inclined lift trailer make Böcker type Piccolo 20 / 0-4Fabr. -No: 27470, built in 1996Load capacity: 200 kgextendable from: 5.14 - 20.10 mRope diameter: 6 mmEngine type: motorhydaulischEngine: HondaDrive power - petrol engine: 8 kWWeight approx: 840 kgTotal length approx: 6540 mmbuilt on single axle trailerWith- slack rope safety- Slewing ring can be locked in three positionsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Gear milling machine / gear hobbing machine make NILES type RF 6 M 15Lizensbau Pfauter Chemnitz, year of construction unfortunately not visibleTechnical specifications:Wheel diameter to be milled for spur gears: 1500 mmmax. Milling to be milled: 15 Mod.Range of helical gear drm. at10 ° spiral approx.: 1500 mm20 ° spiral approx.: 1500 mm30 ° spiral approx: 1350 mm40 ° spiral approx.: 1060 mm45 ° spiral approx: 900 mm50 ° spiral "750 mm60 ° spiral approx.: 450 mmBurr turns per minute: 20-26-33-43-56-71-90-118gr. Outer diameter of the milling cutter: 200 mmDrm. Milling mandrels: 27-32-40 mmDrm. of the workpiece clamping mandrel: 60 mmRotation of the drive pulley on the machine per minute: 520Drm. the drive pulley on the machine: 500 mmWidth of the drive pulley on the machine: 130 mmPower requirement: 10 hpRotation of the engine: approx. 1000 rpmExternal dimensions of the machine: 320 ...

Vertical wet belt grinding machine make MAFAC type V 100Masch. -No: 88174543 Year 1988Sanding belt dimensions: 20-100 x 3500 mmStand projection: 500 mmTable size: 650 x 650 mmWidth of the contact surface: 100 mmBelt speed through polswitchable motor: 12.5 m / sAir pressure: 5-6 barOscillation approx: 0 mmDrive motor 380 V: 21 kWWeight: 430 kgSpace required: 840 x 1180 x 1760 mmwith saucer approx: 2050 mm highWith- Compl. electr. Facility- belt oscillation- pneum. belt tension- Belt filter automat- sep. control cabinet:used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Flat belt grinding machine make MAFAC type NT 300 SFabr. -No: 417643 Year 1986Tape dimensions: 2000 x 300 mmBelt speeds: 6, 8, 10, 12, 16, 20 m / srequired air pressure: 5 - 6 barDrive power: 9.3 kWDimensions L x W x H: 1440 x 1200 x 2047 mmWeight approx: 500 kgWith- Table motorized vertical and horizontal- wet grinding device- pneum. belt tension- Deburring and chamfering deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Make -No: 1520Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Machine -No: 4559 built in 1984Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam.: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWWith- mot. Turning and feed drive- Feed and transport rollersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grinding and belt grinding machine make METABO type 7732DFabr -No: 799930Wire brush right: Drm. 400 mmBelt grinding arm left: belt width 50 mmEngine speed: 1430 rpmDrive power: 1.5 kWPower connection: 380 V, 50 HzWith- Underframe- Wire brush and belt sanding armused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Centerless circular and polishing grinding machine make LÖSER type RPS 374Year of construction 1990Technical specifications:Grinding range: 6 - 80 mmBelt dimensions: 2500 x 150 mmFeed speed: 0 - 10 m / min.Max workpiece weightDiameter range up to 80 mm approx.: 10 - 15 kgNumber of grinding stations: 2Drive power per grinding station: 5.5 kWWith- Supply and discharge- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine / contact belt grinding machine make LÖSER type KS 350Machine -No: 6258 built in 1992Technical specifications:Abrasive belt length: 3500 mmAbrasive belt width: 5 - 75 mmDrive pulley diameter: 180 mmBelt speed: 13.5 + 27 m/minTube diameter: 3 - 180 mmFeed speed: 0 - 25 m/minDrive power: 3.2 / 4 kWWith- Additional device BC 350- roller transport unit on both sidesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic horizontal broaching machine make HAHNDORF type HRY 1200Technical specifications:Groove width up to: 22 mmPulling force: 4.0 tMax. broach length: 1200 mmBroaching speed: 0 - 3.7 m/minRapid return constant: 8.5 m/minHole pitch: 24 x 15°Mounting plate diameter: 350 mmWorking height: 925 mmTank capacity: 100 lPump output: 15 l/minDrive power: 3.0 kWDimensions L x W x H: 3310 x 500 x 1100 mmWeight approx.: 375 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal cylindrical grinding machine make WMW Karl-Marx-Stadt type SU 315 x 1500Machine -No: 8486Technical specifications:Largest swing diameter: 315 mmLargest grinding length: 1500 mmLargest workpiece mass: 300 kgLargest diameter grinding wheel: 630 mmlargest width: 200 mmBore: 305 mmGrinding spindle speed at V = 35 m / s. : 1060/1200/1400 rpm. at V = 50 m / sec: 1500 rpm.Connected load: 12.6 kWWeight approx: 5.8 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic keyseating machine make FRÖMAG type Rapida D RAD 63/600Fabr. -No: AKK84873 built in 1978Technical specifications:Groove width: 3 - 63 mmmax.groove length: 600 mmHole diameter: 10-500 mmFeed size: 0.01-0.5mmCutting speed: 0-22 m / minReturn speed stepless: 0-50 m / minLoad capacity max .: 30000 kgCutting force: 30000 NTable size: 460 x 690 mmOperating height: 1145 mmBase area: 1200 x 1800 mmFoundation depth: 760 mmDrive power: 8.77 kWWeight approx: 1680 kgWith- many draw numbers- many guide bushessecond hand:SPECIAL PRICE in stock as available - with lots of accessories!Control in need of overhaul: EUR 6.500, - Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Cycle controlled lathe make METOSA type UD 260 CH x 1500Machine -No: 42194 built in 2001Center height: 260 mmTip width: 1500 mmCircumferential diameter: 475 mmCircumference diameter over bed: 530 mmCircumferential diameter over cross slide: 315 mmBed width: 350 mmSpindle bore: 80 mmSpindle mount: DIN 55027/8Discharge range: 0 - 2500 rpm.Feed range: 0 - 7000 rpm.Rapid traverse area: 10 m / min.Drive power: 15 kWWeight approx: 3.1 tOutside dimensions approx: 4120 x 1600 x 1800 mmWith- Three-jaw lathe chuck- Quick change tool holder with several inserts- CNC control FAGOR 8055/55 / TCLocation Staufenberg, little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

High precision turret lathe manufactured by SCHAUBLIN type TR 102 HPMasch. -No: 167073, year of construction 1966controlled hydropneumaticallyTechnical specifications:Tip height: 102 mmBed length: 900 mmDistance between headstock and turret: 300 mmCollets passage: 22 mmNumber of places in the revolver: 6Bore diameter: 20 mm6 spindle speeds: 840 - 3000 rpm.Feed rates: 0.02 - 2 mm / minFast delivery: 8 m / minrequired air pressure: 5 - 7 atmAir consumption: 5 - 10 m3 / hDrive power: 2.5 HPWeight approx: 670 kgExternal dimensions: 1930 x 590 x 1680 mmWith- Collet insert- bar feed- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO ...

Short Bed Mechanic Lathe Fabr. PRÄWEMACenter height: 125 mmdistance between centres: 300 mmBed length: 550 mmBed width: 140 mm8 spindle speeds: 180 - 2000 rpm.Spindle bore: 25 mmDrive power: 2.2 kWWith- Four-jaw lathe chuck 160 mm- Quick change tool holder with several insertsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret lathe make WEILER type RDU 260/38Fabr. -No: 12304/442 Year 1971Center height 125 mmSpindle bore 38 mmTurning diameter over bed 260 mmmax. tip distance 500 mmBed length 1020 mm16 spindle speeds 125 - 2800 rpm.Drive power 0.5 / 1.2 hpDimensions L x W x H approx.: 1400 x 700 x 1400 mmWith- built-in electr. Collet chuck- collet set- Parting supportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret Lathe Fabr. SPRINT Type T.R. 26Fabr. -No: 556Technical specifications:Center height: 125 mmdistance between centersSpindle bore: 30 mmBed length: 700 mmBed width: 140 mmMax. Distance Turret tailstock / spindle: 400 mmSpindle speeds: 140 - 2830 rpmExternal dimensions Length x width x height: 1500 x 800 x 1600 mmWeight approx: 700 kgWith- Spangenangeneinrichtung- Revolver stick- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools