mmartini used for sale

Inverter welding machine for MMA welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welding machine, electric manual welding inverter Serial no.: TB1703500316 Item no.: 440030 Year of construction 2022 Power TIG (DC) 170 Amp. 45% ED 150 Amp. 60% ED 135 Amp. 100% ED Power MMA 170 Amp. 35% ED 145 Amp. 60% ED 125 Amp. 100% ED Adjustment range 5-170 Amp. infinitely variable Mains connection 230 Volt, 50 Hz hot-start function (optimises ignition behaviour, simplifies welding start of electrodes that are difficult to ignite)- Anti-stick function (optimises electrode guidance and prevents electrode from sticking)- Arc force function (optimises arc stability and improves penetration) - Lift-Arc ignition - Rod electrode welding, can be used for all electrode types up to 4 mm- Ground cable with plug connection - Electrode rod with 3 meter cable and plug connection - equippe ...

Servo motor, permanent magnet DC servo motor with speedometer INDRAMAT MDC10.20F/MMA-0/S06 2000 rpm 170 V DC shaft: Ø 22 mm Flange: Ø 132 mm used, tested ! Dimensions: 385 x 145 x 195 mm

Description: Tensione di alimentazione: 230 V Frequenza di alimentazione: 50/60 Hz Consumo energetico: 7, 1 kVA Tensione a vuoto: 60 V Intervallo di corrente di saldatura: 20 - 250 A Ciclo di lavoro: 60% - 250 A, 100% - 193 A Fattore di potenza: 0, 9 Dimensioni dell'elettrodo: 1, 6 - 4, 0 mm Raffreddamento: em ventilato Classe di protezione: IP21S Classe di isolamento: H weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm

Description: Tensione di alimentazione: 230 V Frequenza di alimentazione: 50/60 Hz Consumo energetico: 7, 1 kVA Tensione a vuoto: 60 V Intervallo di corrente di saldatura: 20 - 250 A Ciclo di lavoro: 60% - 250 A, 100% - 193 A Fattore di potenza: 0, 9 Dimensioni dell'elettrodo: 1, 6 - 4, 0 mm Raffreddamento: em ventilato Classe di protezione: IP21S Classe di isolamento: H Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 5 kg

DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

volt: 150 V ampere: 19 A weight: 20 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipped with various accessories; unused in box

including accessories; unused in box

including accessories; unused in box

including accessories; unused in box

including accessories; unused in box

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motors available -Price: per piece -Dimensions: 540/200/H250 mm -Weight: 50 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø mm -Number: 1x motors available -Price: per piece -Dimensions: 670/206/H245 mm -Weight: 51 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motors available -Price: per piece -Dimensions: 670/206/H245 mm -Weight: 50 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor, Permanent Magnet DC Servo Motor -Max. Speed: 2000 rpm -Shaft: Ø mm -Number: 1x motors available -Price: per piece -Dimensions: 685/142/H190 mm -Weight: 31 kg/piece

Description: 220V voltage, with inverter, max. output current 60 A weight approx.: 2 kg, Approx. Onsite Dimension. (l x w x h): 500 x 200 x 200 mm

Description: 220V voltage, with inverter, max. output current 60 A weight approx.: 2 kg, Approx. Onsite Dimension. (l x w x h): 500 x 200 x 200 mm

CNC lathes make SPINNER type TC 65 CMachine -No: 050023 built in 1996Technical specifications:Distance between centers :600 mmSwing diameter over bed: 400mmMax. turning diameter: 310 mmAdjustment path X-axis: 200 mmAdjustment path Z-axis: 500 mmAdjustment path Q-axis: 500 mmC-axis adjustment range:360°max. rapid traverse: 20 m/min.Feed: 0 - 15 m/min.Main spindle passage: 65 mmMax. spindle speed: 4000 rpm.Counter spindle passage: 26 mmMax. spindle speed: 6000 rpm.Quill diameter: 80 mmQuill stroke: 100 mmNumber of turret stations: 16-foldMain spindle motor: 14 kWTotal connection value: 20 kWWeight approx.: 4500 kgDimensions approx.: 1700 x 2200 x 1700 mmwith- Control Siemens 820 T- 16-fold revolver- counter spindle- C axis- 8 powered tools- Parts catcherused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

FOR SALE COMPLETE T/C IHI-BBC VTR 454-32 FOR SALE COMPLETE T/C IHI BBC VTR 454-32 TO WHOM IT MAY CONCERN; WE VE USED COMPLETE IHI BBC VTR 454-32 AT OUR STOCK . PLS FIND SPECIFICATION T/ C AT BELOW. IHI BBC TYPE VTR 454-32 no xi 145203 N mmax 580C t mmax 290 revolutİon 17400RPM 01 1 17 01 2 04 1 13 12 1 10 03 1 16 14 1 00 01 1 00 16 MADE IN JAPAN TURBO CHARGER IS READY TO LOAD ON TRUCK . IZMIR /TURKEY EX STOCK IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE NEW UNUSED ABB VTR 254-11 COMPLETE TURBO CHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED ORIGINAL ABB VTR 254-11 COMPLETE TURBO CHARGER WITH ORIGINAL PACKAGE IN WOODEN BOX AT OUR STOCK. PLS FIND SPECT AT BELOW.. TYPE VTR254-11 HT 841632 t Mmax 680 C t Bmax 650 C N Mmax 523 N Bmax 497 SFUS01 YOB 2015 WEIGHT 650KG EX OWNER SUPLIED FROM WARTSILA. MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

CNC lathes make SPINNER type TC 108 MCMachine -No: 040199/98215 built in 1998Technical specifications:Distance between centers: 1000 mmSwing diameter over bed: 520 mmMax. turning diameter: 358 mmAdjustment path X-axis: 296 mmAdjustment path Z-axis: 1090 mmMax. rapid traverse X-axis: 18 m/min.Max. Z-axis rapid traverse: 24 m/min.Bar Capacity: 107mmSpindle speed: 2500 rpm.Quill diameter: 110 mmQuill stroke: 100 mmNumber of driven stations:12Connected load: 50 kVAWeight approx.: 6500 kgDimensions approx.: 3590 x 1750 x 1890 mmwith- Control Siemens 810Dused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Die sinking machine make AGIETRON type EMS 3.30Year of construction 1979Table size: 630 x 500 mmgr. workpiece height: 340 mmAdjustment = X: 420 mmAdjustment = Y: 320 mmgr. workpiece weight: 8000 NReading option: 0.01 mmgr. distance of table quill: 700 mmWork container: 945 x 650 x 465 mmFeed travel = Z: 400 mmRapid traverse and servo speed: 600 mm / minOutreach: 500 mmAgiepuls generator: Type 60 L / DDLRated current: 60 APulse voltage: 100/150/270 V.Dielectric aggregate: Type DA 220Capacity: 450 mmWeight: 1540 kgvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...

Haulotte HA16RTJ PRO!Year of construction 2018Operating hours 1028 hCE certificate available!TOP machine with pendulum axle, endless rotation of the upper carriage and 4 wheel steeringWorking height 16 mPlatform height 14 mMaximum range 8.3 mArticulation point 7.65 mMaximum load capacity 230 kg (2 pers.)Platform dimensions 1.83 x 0.80 mLength in basic position 6.75 mWidth 2.3 mHeight when retracted 2.3 mVertical swivel range of the basket arm 140° (- 80° / + 60°)Platform swivel range 165° (- 75° / + 90°)Swivel range of the superstructure 360° continuousOverhang 10 cmWheelbase 2.1 mGround clearance 37 cmInclination 5°Driving speed 5.2 km/hMaximum climbing ability 40%Turning radius - outside 3.75 mMotor Kubota 18.5 kW (Stage 5 in EU)Total weight 6,540 kgTransport length 5.05 mTransport height 2.4 mOff-road tires made of solid material 830 x 285 mmMaximum wind speed 45 km/hMachine d ...

Haulotte Compact 12 DX work platformPresenter with few hoursYear of construction 2022Operating hours: 177hRaises, lowers and drivesCE certificate available!Working height 12.06 mPlatform height 10.06 mMaximum load capacity 450 kg (3 pers.)Boom load capacity 150 kgNumber of extensions 1Platform length 2.45 mPlatform length with extension 3.7 mPlatform extension 1.2 mPlatform width 1.45 mPlatform dimensions - extended 3.7 x 1.45 mTransport height 1.7 mHeight when retracted 2.56 mWidth 1.78 mLength 3.18 mWheelbase 1.84 mGround clearance 28 cmDriving speed 0.6 - 5.5 km/hCan be moved at a maximum height of up to 8.15 mMaximum climbing ability 40%Inclinometer 3 °Raising and lowering time 35 s / 51 sTurning radius - outside 3.5 mTires - foam filled 26 x 12 - 16.5Engine Kubota, 18.5 kW (Stage 5 in EU)Hydraulic oil tank capacity 75 lTotal weight 3965 kgMachine works well!

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Plate size: 1500 x 4000 mmPlattenhöhe including ribbing: 370 mmStärke of the upper plate: 50 mmArbeitshöhe in the assembled State: 870 Mmweigth: 6.8 t

4 pcs Kragarmregalstand, one-sided, new, built year: 2019, consisting of:- Also possible with Dacharm! - Also possible with Dacharm! Technical data:Shelf height: 4,200 mmShelf depth: 1,360 mmShelf length: 4,000 mmAxis distance: 3 x 1,300 mmExtension: 1,200 mmKragarms per stand: 3 pieces (screwed)Grid: 100 mmmax. Ab. Load capacity / arm: 750 kgmax. Ab. Load capacity / stand: 2.250 kgSurface: hot-dip galvanizedCondition: newMaterial circumference: number of stands one-sided: 4 pieces / IPE 160Number of foot profiles: 4 pieces / IPE 160Number of kragarms: 12 pieces / IPE 100Number of cross bandages: 1 pieceNumber of spacers: 6 PieceIncl. Screws, dowels and debit labelsArticle locations / subject to availability: Germany Austria SwitzerlandFreight / Delivery: 5 - 10 business days after receipt of paymentFreight costs (D): â?¬ 360,00 incl. VAT Austria Switzerland by arrangementNote: ...

Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically supported backwash: Backwashing medium frequency-controlled RückspülpumpeNeutralisation: neutralisation tank: Material PENutzvolumen: 5.0 m³ material, shaft and stirrer: beschichtetDosierstationen steel: ...

Lid FP 2 NC Used machine (good condition) Control type NC Built in 1987 Operating hours n/a Price 9,900 € net plus VAT Dimensions 1325 x 1315x 1845 Weight 1450 kg Location 35708 Haiger The machine was part of a training workshop, it is made of 1st hand and has few hours of operation. Travel routes; x = 300, Y = 300, Z = 400 mm Speed range: 31.5 - 3150 rpm DESCRIPTION CNC milling machine lid FP 2 NC year: 1987 Control: 3-D web control dialog 4 Can also be operated manually via handwheels Travel paths; x = 300, Y = 300, Z = 400 mm Voltage: 380 volts Speed range: 31.5 - 3150 rpm power, 1.6/ 2.0 kW WZ recording, SK 40 Hydraulic Tool Clamping Rigid Angular Table Table Size: 620 x 390 mm Electronic handwheel Coolant device Machine light Spray protection cabin Accessories: operating and programing instructions, electrical circuit diagrams, WZ-holders Weight: 1450 kg Dimensions: L  ...

Pacage set of REHM TIG WELDING MACHINE Welding torch 10m welding gun covers 3 different sizes look photos Suitcase for the complete set included Gun for electrode mma welding

Notching saw make GRAY type AS 350Machine -No: 16 built in 1989Technical specifications:Working area:Cutting height: 110 mmLatching depth: 85 mmNotching width: 250 mmTool:vertical unit: 40 mm, 4 mm seat heighthorizontal unit: 40 mm, 15 mm seat heightTool diameter:vertical unit: 350 mmhorizontal unit: 300 mmAir connection: 6.0 barSpeed: 2800 rpm. direct driveDrive 2 three-phase brake motors: 380 V, 3.0 kWWeight approx: 300 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Type: Universal machine milling machine FP 3 L Make: DECKEL Data: X-axis: 800 mmY-axis: 300 mmZ-axis: 400 mmAccessory: 3-axis active digital display Sony , fixed table 1000 x 450 mm (T-groove: 16 mm) Vertical milling head SK 40 with tightening thread S 20 x 2 central lubrication, hand-operated coolant device Operating instructionsDimensions/weight: approx. 1675 x 1700 x 1850 mm (LxWxH) / 1900 kg Prices plus VAT Item location: 35708 Haiger

FOR SALE NEW UNUSED MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS NEVER USED & MONTAGED . IT WAS STOWED AT WOODEN BOX PLS FIND SPECT AT BELOW. TYPE NR20 / R149 Work No. 7531934 t Mmax 650 C SPEED 44000 rpm YOB 2011 WEIGHT 450KG EX OWNER SUPLIED FROM MAN . MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Notching saw make GRAULE type AS 350Year of construction 1991Technical specifications:Working area:Cutting height: 110 mmNotch depth: 85 mmNotch width: 200 mmtool holder:vertical aggregate: 40 mm, 4 mm seat heighthorizontal aggregate: 40 mm, 15 mm seat heighttool diameter:vertical unit: 350 mmhorizontal unit: 300 mmAir connection: 6 barSpeed: 2800 rpm. direct driveDrive 2 three-phase brake motors: 380 V, 3 kWMotors individually switchable withvoltage tripping and overloadfuseWeight: 300kgAdjustment options: Sliding carriage via:Handwheels in height and:Depth adjustableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Corner cleaning machine for automatic deburring of weldson welded plastic frame make ROTOX type EPA 277Machine -No: 277 6217 Year 1992Max. Profile size: 160 x 150 mmminute Profile size: 30 x 30 mmFrame size min.:320 x 320 mmAir consumption: 200 l / minAir pressure: 6 - 8 barConnected load: 2.2 kWPower connection: 380 V, 50 HzWeight approx: 900 kgWith- aut. profile recognition- Profile edition page selectable- electronic PLC control- minimal processing timelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic punch, make ELUMATEC type ST 225Masch. -No: 20111 year of construction 06/1990Technical specifications:Ram stroke: 40 mmRam force at 10 bar: 6000 KpInstallation height: 146 mmCompressed air connection: 10 barThroat: 75 mmAir consumption per stroke: 9 lTable surface: 280 x 215 mmWaste hole: 60 mmExternal dimensions: 500 x 570 x 1301 mmWeight approx: 60 kgWith- foot switch- many changing toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bench drill make PERFEKT type X 15Machine -No: 872075 built in 1987set up for automatic workflow!Technical specifications:Drilling capacity max.: 15 mmSpindle mount: MK 210 spindle speeds: 225 - 3000 rpm.Quill stroke: 90 mmProjection: 200 mmTable size: 240 x 240 mmDrive power: 0.5 hpDimensions L x W x H approx.: 700 x 750 x 920 mmadditionally equipped with- pneumatic moveable clamping table 280 x 165 mm for automatic longitudinal travel- pneumatic quill feed- Blow-out device- maintenance unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column drilling machine make ALZMETALL type AB 25 SVMachine -No: 1717 built in 1976Technical specifications:Drilling capacity in ST 60: 28 mmDrilling capacity in GG 20: 30 mmDrilling capacity in ST 60: 35 mmSpindle mount: MK 3Projection: 293 mmColumn diameter: 115 mmTable size: 500 x 400 mmClamping surface: 400 x 300 mmInfinitely variable spindle speeds: 130 - 480/480 - 1750 rpm.Spindle stroke: 160 mmautomatic feed: 0.14 mm / rev.Drive power: 2.2 kWMachine height approx .: 1860 mmWeight approx: 320 kgwith- stepless spindle speeds- height adjustable table- cooling device- R. + L. runused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Jig boring machine make SIP type MP 3 KFabr.-Nr. 9809 year 1981Clamping surface of the worktable: 520 x 380 mmLongitudinal adjustment of the work table: 450 mmTransverse adjustment of the drill spindle slide: 350 mmDistance between table surface max .: 520 mmxa0xa0xa0 and drill spindle: 120 mmPassage between the uprights: 600 mmVertical adjustment of the crossbeam: 400 mmDrill spindle: MK 2Infeed stroke: 150 mmSpindle speeds: 75-2000 rpm.automatic feed: 0.02-0.18 mmDrilling capacity in cast iron Drm.:25 mmxa0xa0xa0 in mild steel Drm.:20 mmGr. boring diameter: 100 mmReading on the auxiliary scale: 1 mmAccuracy: 0.005 mmMain drive motor: 1 hpDimensions L x W x H: 1740 x 1520 x 1880 mmWeight approx: 1680 kgWith- guide arm- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are  ...

Compressor unit on base plate make KAESER type 3300-GFabr. -No: 55585 built in 1980Technical specifications:Stroke volume flow 3300 l / mineffective delivery 2300 l / minpermissible operating pressure 10 barCompressor speed 1220 rpm.Power requirement 18.5 kWExternal dimensions 1600 x 830 x 870 mmAggregate weight 490 kgWe need space!Special price ex warehouse MörsdorfPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single Column Coordinate Drilling Machine Fabr. WMW Mikromat Type BKoE 400 x 630/1Mash. -No: 1203.14.44for single, small and medium batch production of high quality gauges, fixturesTools and workpieces with tight tolerance requirementsTable size: 630 x 400 mmTable feeds: 63/160/400/1000 mm / min19 spindle speeds: 45 - 2800 rpm.Spindle feed: 0.014 - 0.5 mm / revHeadstock feed: 0.006 - 0.22 mm / revDrilling spindle stroke: 100 mmSpindle diameter: 80 mmTool holder: MK 3Distance between table and spindle: 40 - 560 mmAdjustments along: 400 mmtransverse: 250 mmvertical: 420 mmExternal dimensions approx: 2190 x 2010 x 2330 mm highWeight: 2.3 tWith:- 2-axis digital display- Angle drill head- 1 set of tool holders- 1 microscopeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding ...

Corner notching machine make BOSCHERT type K 30 - 120 MINI S DIG.Machine -No: 398, year of construction 1993Cutting performance at St 40: 4.0 mmCutting performance at VA: 3.0 mmCutting length: 150 x 150 mmAngle adjustment: 30 - 120 °Table height: 900 mmConnected load: 4.5 kVADimensions L x W x H: 1250 x 800 x 1160 mmWeight approx: 850 kgWith- Adjustable digital display for both notching sidesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneum. Corner notching machine make EDEL type EP 950Fabr. -No: 24958377, year of construction 1983Cutting length: 200 x 200 mmCutting angle: 90 °Max. Sheet thickness: 4 mmAir consumption per stroke: 70 lWeight: 330 kgExternal dimensions: 800 x 700 x 1500 mmWith- Lutwartungseinheitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Z-profiling machine make probably SCHECHTL / HEIDT type SZP 250Technical specifications:Working width: 2500 mmSheet thickness St.:0.5 - 1.5 mmSheet thickness VA:0.4 - 1.0 mmSheet thickness aluminium: 0.4 - 1.0 mmRoller distance: 160 mmNumber of profile rollers:15Profiling height: 3 - 7 mmThroughput speed: 20 m/min.Drive power: 2.0 kWWorking height: 890 mmApprox. weight: 880 kgExternal dimensions approx.: 3200 x 1040 x 1290 mmwith- Forward and reverse switch- support table- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RAIMANN type USM 58Machine -No: 219361 Ser. -No: 1068 built in 1989Technical specifications:Brush diameter: 300mmBrush Width: 110mmDrive power: 2.2 kWPower connection: 380V, 50HzDimensions L x W x H: 750 x 600 x 1100 mmApprox. weight: 80 kgwith- Table axially adjustable in height and angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC controlled belt grinder make TAGLIABUE type TT-3-1300Machine -No: E6 / 36886 Year 1996Max. Grinding belt width: 1300 mmMax. Passage: 1300 mmGrinding range: 4 - 350 mmcontinuous belt speed: 6 - 12 m / min.variable feed rate d. Conveyor belt: 5.0 - 25 m / min.Sanding belt size: 8500 x 150 mmSlat strip size: 6530 x 140 mm:Broadband feed table: 5000 x 1200 mmExtraction roller table: 4000 x 1400 mmAir consumption: 1400 l / min.Air extraction: 9000 m³ / hPower of the vacuum pump: 7.5 kWPower of the belt motor: 3.0 kWTotal installed capacity: 30 kWWeight approx: 6000 kgMachine width: 5000 mmWith- CNC control Fabr Syel- Vacuum material tension- Extraction and filtration system make Ticnomac, 13 kW, year 96very little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Er ...

Beading machine make RAS type 110 MMachine -No: 69/6 built in 1956Technical specifications:Max. sheet thickness: 1.75 mmmaximum projection: 250 mmDrive power: 0.75 kWWith- foot pedalusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine / contact belt grinding machine make LÖSER type KS 350Machine -No: 6258 built in 1992Technical specifications:Abrasive belt length: 3500 mmAbrasive belt width: 5 - 75 mmDrive pulley diameter: 180 mmBelt speed: 13.5 + 27 m/minTube diameter: 3 - 180 mmFeed speed: 0 - 25 m/minDrive power: 3.2 / 4 kWWith- Additional device BC 350- roller transport unit on both sidesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic internal and surface grinding machine make RIBON type RI 200Year of construction 1985sm. Grinding diameter: 6 mmmax. grinding diameter: 100 mmmax. grinding length: 200 mmmax. table lift: 400 mmTop height: 170 mm4 workpiece speeds: 155 - 455 rpm.2 spindle speeds: 14000/28000 rpm.Revolutions of the face grinding spindle: 4000 rpm.Speed of the table adjustable: 0 - 8 m / minkl. Feed of the internal grinding head: 0.005 mmautomat. Feed of the internal grinding head: 0.005 / 0.010 / 0.015 mmDrive power Workhead: 0.35 HPDrive power internal grinding head: 2 / 1.7 hpDrive power plane grinding head: 0.75 hpDrive power hydraulics: 1.4 hpDrive power cooling device: 0.15 hpDimensions L x W x H approx: 2200 x 1600 x 1600 mmWeight approx: 1500 kgWith- Internal grinding spindle- Face grinding head- Diamond stripperused, in very good conditionPrice on request.Delivery: ex warehouse or locatio ...