mikron 400 u used for sale

Universal clamping table, tilting and swivel table, height adjustable, T-slot plate PAGUS clamping surface: 570 x 460 mm 3 grooves groove width: 14 x 24 mm swivel 45° used, tested ! Dimensions: 660 x 460 x 280 mm

Flow Indicators, Variable Area Flow Meter MLW URSAFLUX GF25 19 031 11 ( GF251903111 ) NW25 < br /> Measuring range: 0 - 1 m3/h ( H2O at 20°C ) Operating pressure: max. 1 MPa ( 10 bar ), ND10 Flange diameter ( outer ): Ø 115 mm Installation length: 443 mm including replacement measuring tube, -scale, - variable area Materials: measuring tube: Labortherm G, variable area, connections: stainless steel flanges, housing: steel, sheet steel ( electro-galvanized, housing painted ) pane: multi-cylinder safety glass New ! Dimensions ( flow indicator, without flange ): 443 x 148 x 132 mm Dimensions ( package ): 475 x 190 x 140 mm

Maintenance Unit, Pressure Regulator NORGREN OLYMPIAN PLUS C64S-DK1064 B64G-NNK-MD3-RMN T64T-4GB-P1N P: 0.4 - 10 bar Pmax.: 17 bar Explosion-proof ! Dimensions: 300 x 250 x 120 mm

Flow indicator MLW URSAFLUX flange Ø 150 mm New ! Dimensions(package): 550 x 300 x 200 mm

Maintenance unit, three-piece MARTONAIR, NORGREN M8B-A68-B39D R15-000-RNL0 F15-000-M3H0 L15-000-0P90 G 1 1/4 0.4 - 8 bar New !' Dimensions: 450 x 280 x 145 mm

Evaluation unit PEPPERL+FUCHS Ident - M MVI-F57-2HB12 108068 Dimensions: 340 x 260 x 190 mm

Maintenance unit, maintenance device combination FESTO LFR-D-DI-MAXI LFR-1/2-D-DI-MAXI-KF 192445 G 1/2 12 bar used, tested ! Dimensions: 360 x 290 x 125 mm

Scooter ITOH DENKI Power Moller PM570AS-15-300-3-380-UR630A Diameter: Ø 63 mm Length: 300 mm New ! Dimensions: 360 x 70 x 70 mm

Maintenance unit with pressure switch REXROTH 3 x 0 821 100 023 2 x 0 821 300 306 1 x 0 821 302 515 4 x 0 821 300 920 1 x 0 821 300 264 0,0,0 5 - 16 bar used, Accessories for AGIE CUT 300 ! Dimensions: 340 x 250 x 100 mm

Ultrapure water treatment, EDI SNOWPURE / ELECTROPURE / EDWARDS EDI XLBOC-500 YL3201003 used, tested ! Dimensions: 570 x 420 x 220 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0412 Nominal pressure: 1 MPa (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.0 1 TGL 20705 ED 100 24 V DC used, tested ! Dimensions: 230 x 130 x 180 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0410 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.1 TGL 20705 ED 100 220 V AC used, tested ! Dimensions: 230 x 130 x 170 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St GK 04/0400 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm hand levervenil ORSTA 6-0.1 TGL 20705 used, tested !' Dimensions: 240 x 130 x 240 mm

Control cabinet cooling unit, control cabinet cooling unit PFANNENBERG DTS 73.. (1500 watts) 220 V Dimensions: 390 x 220 x 1350 mm

Twist drills, automatic drills GÜHRING UWUK Ø 36 mm HSS DIN 1897 New ! Dimensions: 210 x 60 x 60 mm

Circulation pump, centrifugal pump, water pump, chemical pump KSB ETALINE GN40-160/902 Ausf. GN6, CD4090 with control unit VarioDrive Type:30FV1 DN60 380 V very good condition Dimensions: 680 x 310 x 470 mm

Ultrasonic Level Switch, Level Transmitter ECHOSONIC FLOWLINE LU12-5001 with 3 m cable ! Dimensions: 110 x 110 x 60 mm

Flow meter with display unit ACS, ENDRESS+HAUSER PROMAG 33A 33AT04-FD1BA41A22A DN04 1.4404 PN40 IP67 flange Ø 95 mm The two devices are not wired together ! S364 and EL249 combined ! Dimensions: 330 x 260 x 240 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Control cabinet cooling unit, control cabinet cooling unit RITTAL TOP THERM PLUS SK 3303500 suitable for PC cabinet EL407 ! 20°C to 55°C 230 V used ! Dimensions: 280 x 230 x 550 mm

Landing gear, wheelset, disc housing CIMCORP 413382 / 413381 / 412251 ( 413382 / 413381 / 412251 ) replacement landing gear for CIMCORP bearing system missing wheel will be added ! New ! Position sensor and cleaning system used, tested ! Dimensions: 1200 x 800 x 500 mm

Inverter and holder for ultrasonic welding machine TELSONIC Ultrasonics SE-26/20-36kHz VK / max 500 W max. converter voltage: 1500 V with holder and pneumatic lowering stroke: 40 mm suitable for S840 and S842 used, tested ! Dimensions: 470 x 80 x 115 mm

Control cabinet cooling unit, control cabinet cooling unit MCLEAN MIDWEST SLIMBOY 28-0626-G005 Useful cooling capacity: 1582 / 1758 W 230 V 60 Hz used, tested ! Dimensions: 990 x 250 x 730 mm

Load cell with connection unit, force transducer, load cell PROMESS 20002 10900/4 measuring range: 1 kN cable length approx. 0.6 m used, tested ! Dimension(Sensor): 40 x 40 x 32 mm Dimension(Connection Unit): 160 x 95 x 42 mm

Cup grinder LOMEFA Unicum 8 year: 1970 Workpiece length max: 350 mm Workpiece width max: 150 mm Workpiece height max: 100 mm Plate radius: 200 mm Magnetic plate: 400 x 160 mm Coolant tank with pump in the base cabinet Motor: 1.1 kW 380 V used, tested ! Dimensions: 700 x 800 x 1170 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRUVA type: LMD-500-01 inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Pressure regulator hand-adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262-242H283 inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm

Pillow block bearing, with insert bearing NSK UCP212 N AV2S housing: P212 insert bearing: UC212 shaft diameter: Ø 60 mm New ! Dimensions: 240 x 75 x 140 mm

Housing Unit, Three-Hole Flange Bearing Housing Unit, Flange Bearing INA PCFTRY 35, PCFTR35 2pcs ! housing: CFTR07 insert bearing: GAY 35-NPP-B Shaft diameter: Ø 35 mm Dimensions (single bearing): 145 x 128 x 45 mm New !' Dimensions (Packing): 145 x 130 x 90 mm

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing NTN UCF216D1 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New !' Dimensions (package): 145 x 130 x 90 mm

Housing Unit, Four Hole Flange Bearing Housing Unit, Flange Bearing PAGUS UCF216 2 pieces ! insert bearing: UC216 shaft diameter: Ø 80 mm Dimensions (single bearing): 208 x 208 x 85 mm New ! Dimensions (packaging): 145 x 130 x 90 mm

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 30 10pcs ! housing: 01CJT08 insert bearing: GYE 30 KLLB-C FA115 shaft diameter: Ø 30 mm Dimensions (single bearing): 142 x 80 x 42 mm New ! Dimensions (Packing): 400 x 150 x 90 mm

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing EBS UCFL 207 8 pieces ! housing: FL 207 insert bearing: UC 207 shaft diameter: Ø 35 mm Dimensions (single bearing): 160 x 90 x 65 mm New !' Dimensions (Packing): 300 x 180 x 160 mm

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 45 2 pieces ! housing: CJTR09 insert bearing: GLE 45 KRRB FA115 Shaft diameter: Ø 45 mm Dimensions (single bearing): 180 x 110 x 50 mm New ! Dimensions (Packing): 180 x 110 x 100 mm

Universal clamping table, swivel, tilt and swivel table, T-slot plate PAGUS clamping surface: 630 x 270 mm 5 grooves groove width: 12 mm table can be tilted back and forth from 90°, tilted back and forth by 30° table can be tilted left and right by 15° and swivelled to the left and right by 45° New !' Dimensions: 650 x 290 x 290 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Twist drill bit with internal cooling DORMER A512 HSCO ADX 18.25 ( A512HSCOADX18.25 ) diameter: Ø 18.25 mm holder: Ø 20 m used, tested ! Dimensions: 200 x 20 x 20 mm

- Manufacturer: Winterhalter - Type: GS660 - Heating capacity: 12.0 kW - Connected load: 15.8 kW - Rated current: 25.5 A - Water pressure: 250 - 600 kPa - Water temperature: max. 60°C Dimensions: Width: 137cm Depth: 86cm Height: 177cm

Key data: 1200 mm, 600 mm, 500 mm

Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.

Hunkeler HL6 laser perforator The Hunkeler HL6 is a high-performance unwinder designed for use in digital printing and paper processing systems. It´s typically used in commercial printing environments where large volumes of paper need to be fed into printing or finishing machines. The HL6 is known for its reliability, precision, and speed, making it suitable for demanding production environments. It´s often integrated into production lines alongside other printing and finishing equipment to streamline workflows and increase efficiency. Basic equipment • Basic module with web feed and outfeed • Operating console and operating panel with display for setup and easy operation • Casing with safety monitoring • Register print mark reader top and bottom • Two matrix readers top • Editor for easy preparation of laser patterns • Chiller for cooling the lasers ...

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

Used envelope film machine, cellophone machine by WEGA type Fk-6 . Technical parameters of the machine: - Overall dimensions (L x W x H): 1050 x 670 x 980 mm; - Weight: approx. 180 kg; - Power supply: 1220V, 50-60Hz, 10000W; - Pneumatic supply 0.4-0.6 MP, 20 l/min; - Operating temperature: 15÷40oC. The semi-automatic foiling machine type FK-6 is designed for foiling rectangular boxes with flat and rigid surfaces using the enveloping method. Maximum output: 400 - 600 boxes/hour Maximum box dimensions: 70 x 200 x 230 mm Minimum box sizes: 7 x 60 x 50 mm Film parameters: - polypropylene coextruded film, heat-sealable on both sides, bi-directionally oriented; - thickness: 20-35 µm; - maximum width: 300 mm - minimum width: 70 mm - maximum diameter of film roll: 300 mm; - inner diameter of thimble: 76 ± 5 mm; - recommended film type: 25MB 400 Mobil Pl ...

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...