mh 800 e used for sale

New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity min.: 1 m/min   feed velocity max.: 20 m/min CUT-TO LENGTH SHEAR   sheet width max.: 530 mm   ...

This 3-axis Elumatec DG 244 was manufactured in 2020. It features a cutting length of 6.0 m and a maximum saw blade diameter of 550 mm, providing efficient cutting capabilities. The machine includes a complete extraction unit and a mobile workpiece support for enhanced functionality. If you are looking to get high-quality circular metal cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details.

For sale is a brand-new, unused industrial pump in the premium class: a KSB Etabloc (model: ETB 065-050-125 GGSAV11D200402) in a compact block design, directly driven by a highly efficient Siemens energy-saving motor. The KSB Etabloc series is the global industry standard for maximum reliability with a small footprint. Since it is a block pump, the impeller sits directly on the extended motor shaft. This saves valuable installation space and makes the time-consuming alignment of the coupling completely superfluous – put it down, connect, run. Perfectly suited for water supply, refrigeration systems, air conditioning systems, heating systems and various industrial processes. Highlights of this unit: Condition: NEW & UNUSED – ideal as a directly available replacement pump or for new projects (no long delivery times from the manufacturer!). Compact block design: Small space ...

For sale is a completely brand-new, unused industrial pump of the absolute top class: a KSB Etabloc (model: ETB 065-040-200 GGSAV11D200752) in a compact block design, directly coupled to a highly efficient 7.5 kW Siemens energy-saving motor. The KSB Etabloc series is the global benchmark for reliability, ease of maintenance and space savings in industrial use. Since it is a block pump, the impeller sits directly on the extended motor shaft. This saves valuable installation space and makes the time-consuming, millimetre-precise alignment of the coupling completely superfluous – set up, flange, connect, run. Thanks to the large 200 mm impeller and the powerful 7.5 kW motor power, this unit is perfect for demanding applications with higher heads and pressures (e.g. in industrial water supply, cooling systems, air conditioning systems or process engineering processes). Highlights  ...

marking: Banderolierer / Bornbinder Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SAF 37 DR63M4/TF i = 86.36:1 -Speed: 15 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 335/190/H145 mm -Weight: 11.3 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor with reversing valve -Type: Elmo-G 2BH6 100-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Dimensions: 375/335/H385 mm -Weight: 30.7 kg

description: Binder and labelling system for beverage crates on pallets (or similar). The Bornbinder can tie a finished pallet by means of a cord in the upper area. In parallel, a banderole of foil can be attached in the middle area. This provides the basis for the Logopak to apply a label on both sides. The system is completed with a safety system consisting of a safety fence, muting light barrier at the entrance, muting light barrier at the exit. All information without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your ma ...

description: Modern, automatic high-performance filling lines place high demands on the smooth infeed and outfeed of the containers to be filled. The finely dosed application of aqueous lubricating solutions in exact concentrations according to requirements reduces the frictional resistance between the moving parts, reduces their wear and tear and thus prevents unnecessary production downtimes. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individua ...

dayligth: 420 mm Magnetic field: 420x200 mm grinding length: . mm weight of the machine ca.: t dimensions of the machine ca.: m Stepless automatic feed for table 3-40 m/min Return feed for table Filter attachment Hydraulic unit Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

Have different sizes of millstones in stock

Key data: 1280 KW

CO-GEN GENERATOR SYSTEM By MTU Onsite Energy Year 2015 Type GB1286N5 1286 kW Electrical Power Natural Gas working hours 18.500 h 400 V, 50 Hz, 3-Phase With: 1 Control Panel 1 GEA Heat Exchanger 1 Stamford AC Generator: 1770 kVA Base Rating 1416 kW Base Rating 1500 RPM 400 V, 50 Hz, 3-Phase

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,

Manufacturer: Elektronickarte DFD11B, Serial number: 0224906, Systemconfiguration: 08249725, Serial number: 0224906,

Manufacturer: Purete , Type: Einzellackwalze, Year: 2017, Control: Shllin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: rechts, Working height: 890, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Shore: ca.40, Durchmesser Auftragswalze mm: ca.240, Dosierwalze verchromt: yes, Pump system: Membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: yes, Carriage: yes, Year :2017

Manufacturer: Ernst, Type: Vakuumventilator, Year: 1993, Diameter intake mm: ca 120 mm, Engine power kW: 2,5, Flow rate approx. m3/h: 1500, V-belt drive motor: yes, Outlet side mm: ca.100, Year :1993

Manufacturer: Quickwood , Type: Pro 1400 Elite, Year: 2008, Control: Pogramm , Number of units: 8, Working widht mm: 1400, Through running hight max mm: 100, Diameter of brushes: max. 350, Through running hight max mm: 100, kW output motor: 4x1,84, Feeding speed continous adjustable: yes, Weight approx. kg: 2100, Work piece width min-max mm: 1400, Min.-max. workpiece height in mm: 100, Year :2008

Manufacturer: Eckverbinder Presse pneumatisch,

Manufacturer: Pilz Netzteil C-P8-E Enstörfilter Eingabe, Type: 24 volt 10ms, Model: 3069100,

Manufacturer: Pilz Netzteil C-P-EA4 Ein und Ausgabegerät , Type: C-P-EA4, Model: 24 Entstörfilter, Serial number: 306176,

Manufacturer: Esta Ventilator, Year: 2006, Diameter intake mm: 150, Engine power kW: 1,1 Kw, rotations rpm: 2800, Direkt drive: yes, Year :2006

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Homag, Type: Konvertierungskarte CPU/30/E16 4 x RS, Serial number: 4-086-05-0241, Year: 19.10.1994 K.kraft, Year :19.10.1994 K.kraft

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,

Manufacturer: Wood EYE, Year: 2002, Brettbreite min-max mm: 30-90, Brettstärke min-max mm: 20-55, Brettlänge min-max mm: 500-5000, Year :2002

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Manufacturer: Heesemann , Type: LSM 8 mit EA Entstaubung, Year: 2002, Monting of the machine: Walze/Quer/lang/lang/Lang/3 X Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1300, Steel roller: 1, Transverse sanding units: 1, Längsschleifaggregate: 4, Bürstenaggregate: 3, Band 1 Leistung kW : ca.35, Belt 1 shoe unit: yes, Band 2 Leistung kW : 17, Band 3 Leistung kW : 17, Band 4 Leistung kW : 17, Struckturieraggregat: Möglich, Vacuum table: yes, Year :2002

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013

Manufacturer: Biesse Selco, Type: EBT 120, Year: 2008, Bench top saw: 4400x2200, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Saw blade protrusion: 122, Vorschub Sägewagen : 1-150, Min-max feed programming slider m/min: 100, Saw Blade Diameter mm: 430, Main motor kW: 15, Feeding speed continous adjustable: yes, Scoring Aggregate : 2,2 kW, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Feeding speed continous adjustable: yes, Year :2008

Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Mattei Schraubenkompressor, Type: ERC 200 AP 200 H 4, Screw compressor: yes, Final sealing pressure bar 1: 9, Driving power kW 1: 37, Volume flow rate m³/h: ca.5, Compressed air min/max bar: 9, Dimensions mm: 2000 X 1000 X 1400, Available: sofort, Preis zzgl. Mwst: 1750,

Manufacturer: Stöber, Type: Elektrinikkarte, Model: FAS1015, Serial number: PF6-U1,

Manufacturer: Bürkle, Type: Wellenträge Ersatzbürste, Year: ca.1998, FREETEXT1: Träger für Beizvertreiber Maschine, FREETEXT2: mit Schnellspan möglichkeit, Year :ca.1998

Manufacturer: Ernst , Type: AB 1 1300, Year: 1982, Control: no, Compressed air cleaning: yes, Number of units: 2, Units mounted upright: yes, Roll transport: yes, Feeding speed continous adjustable: gekoppelt an Schleifmaschine, rotor jets: Kanal, FREE TEXT: Arbeitsbreite 1400/Arbeitshöhe 80/inkl.Turbine, Year :1982

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1300, Working height: links, Vorschub Transport m/min min - max: yes, Dosierwalze 1 m/min min-max: yes, Year :1995

Manufacturer: Ernst, Type: 830 J-2, Monting of the machine: quer / längs / längs, Sanding width mm: 1380, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 5.400 x 150 + 3.150 x 1.400, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 15, Band 2 Leistung kW : 30, Band 3 Leistung kW : 37, Continous adjustable feeding speed m/min: 12 - 36, Intermediate sanding of lacquer: no, Constant table hight: ca 880, Vacuum table: 7,5, Brushing unit: 1,1, Weight in kg: 7.400,

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: rechts, Year :1995

Manufacturer: Baberan Kaschieranlage, Type: ECO Line 1400 DSI, Year: 2006, Work piece width min-max mm: 250-1350, Min.-max. workpiece length in mm: 450, Min.-max. workpiece height in mm: 6-40, Working widht max mm: 1350, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Urea plant: yes, Brushing machine: yes, IR zone: yes, Hardener machine: yes, Leimauftragsmaschine : 2, Double-sided: yes, Roller diameter mm: ca.300, Lamination calender: 2 Stück, Diameter of lamination calender in mm: ca.400, Roller diameter mm: ca.300, Rollers heated: yes, Year :2006

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007