We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,950 used machines on RESALE, but how to find them? Machine Search
used
Key data: 1435
Turning diameter: 1435 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW Fields of application machining of two wheel sets at the same time turning of wheel tyre profiles on wheel sets in situ machining of brake discs on wheel sets in situ machining of single wheel sets machining of coupled wheel sets machining of wheel sets of different gauges on all mainline railway, metro and tram vehicles Rail track gauge: 1.435mm Max. wheel tread Ø:1.400mm Min. wheel tread Ø:500mm Number of slides: 2 + 2 Power: 2 x 30 kW Length: 7.000 mm Width: 8.000 mm Height: 2.600 mm Weight: 32.000 kg The tandem a ...
used
Key data: 1400 Siemens, 2450 840 D
Turning diameter: 1400 mm Turning length: 2450 mm Turret positions: 0 CNC Brand: Siemens CNC Model: 840 D Output 1 wheel set 1 hour Rail track gauge: 1435 + 1000 mm Max. wheel tread Ø: 1.400mm Min. wheel tread Ø: 500mm Max. axle length wheel set:2.450mm Speeds / ranges: 133Rpm Number of slides: 2 Power: 2 x 30 kW Length: 8.900 mm Width: 8.000 mm Height: 3.500 mm Weight: &nbs ...
used
Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working
used
turning diameter over bed: 2100 mm turning diameter over slide rest: 1300 mm turning length: 6800 mm workpiece weight: 25000 kg main drive motor: 140 kW Control: Siemens type: 840 C faceplate: 1100 mm bed width: 2500 mm steady: 800 mm steady: 800 mm steady: 800 mm steady: 600 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity: 250 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Make : MFD HOESCH - Germany Typ : PR 250 / 1000 Age : 1992 Height of centre : 500 wheel Ø : 1.000 mm pressing force : 250 ton cylinder stroke : 500 mm Cylinder Ø : 300 mm Cylinder piston Ø : 270 mm working force: 360 bar Pressing speed : 0 - 80 mm/min Pinole feed : 0 – 1300 mm/min Return speed : 0 – 1300 mm/min Centring device Centre angle : 90° Pinole diam. Ø : 100 mm Cylinder diam. Ø : 110 mm Pinole stroke : 500 mm Recently retrofitted Kuenstler Bahntechnik New PC for making marking & measuring protocolcalibration system Big package with differen ...
used
Turning diameter: 1400 mm Turning length: 2600 mm Spindle bore: 0 mm Motor power: 0 HP/kW CNC Brand: Siemens CNC Model: 810 Make Hoesch DR 14 Type DR 1400 N - 1 DR Year 1992 CNC Rail wheel lathe wheel set lathe Centre height (mm) Chuck = 1.400 Center distance (mm) Swing = 1.400 Spindle bore DBC = 2.600 Work load = 5000 Kg Siemens 810 Chip conveyor
used
Capacity: 250 t Table length: 2500 mm Table width: 1000 mm Stroke: 1000 mm CNC Brand: Siemens CNC Model: Siemens TOUCH Railway presses Hegenscheidt MFD - PR 250 / 1000 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Centre height: 550mm Max. wheel tread Ø: 1100mm Max. wheelset length:2500mm Max. pressing force:250T Max. cylinder stroke:500mm Cylinder Ø: 300 Working speed: 10 - 80mm/min. Pinole feed: 1300mm/min. Return speed: 1300mm/min. Length: 6100mm Width: 5730mm Height: 3750mm Weight:&nbs ...
used
Turning diameter: 1400 mm Turning length: 2650 mm Spindle bore: 0 mm Motor power: 0 HP/kW Make MFD HOESCH Type DHR II 130 K S Year 1965 wheel lathe Radsatz drehmaschinen mfd hoesch Centre height (mm) Gauge = 1435 Center distance (mm) Chuck = 1400 Spindle bore L = 2,650 Under power !Profiling turning Double support Used Wheel lathe mfd hoesch ( hegenscheidt) for sale. Gebrauchte radsatz drehmaschine von mfd hoesch ( hegenscheidt ) zum verkauf
used
swing diameter: 436 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m It is a unit price. There are 6 pieces available. For crankshaft work. The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 2235 mm turning diameter over slide rest: 2997 mm turning length: 12200 mm Control: SIEMENS faceplate diameter: 2000 mm total power requirement: 300 hp weight of the machine ca.: / t required space: / m HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Faceplate 2006mm. Centre Height 1,499mm Swing Over Saddle 2235mm. Swing Over Bed 2997mm. Turning Length 12192mm. Min/Max Workpiece Held In Chuck Ø457/1600mm. Maximum Workpiece Weight110 Ton. Speed Range 0.5- 140rpm (300hp Motor). Feed Range 0.0118-7.08/Rev. Steady Capacity Ø356-902mm. Copying Depth 508mm lnductive. Maximum Cutting Force 30,000Nm. Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
DC motor with forced ventilation VEM MFD 60.1-F 03 ( MFD60.1-F03 ) TGL 39434 ( TGL39434 ) 0,3 / 20,2 / 24,6 kW 20 / 4500 / 3700 rpm 39 / 400 V external excitation 270 V forced ventilation 0,37 kW 220 / 380 V wave: Ø 58 mm used, tested ! Dimensions: 900 x 360 x 470 mm
used
DC motor with forced ventilation VEM MFD 132.1-F 02 ( MFD132.1-F02 ) TGL 39434 ( TGL39434 ) 0,15 / 20,8 kW 20 / 2840 rpm 30 / 400 V external excitation 330 V forced ventilation 0,18 kW 220 / 380 V Welle: Ø 42 mm used, tested ! Dimensions: 800 x 530 x 360 mm
used
DC motor with forced ventilation VEM MFDr 160.2-F 02 ( MFDr160.2-F02 ) TGL 39434 ( TGL39434 ) 0,4 / 15 / 19 kW 20 / 2850 / 2250 / 950 rpm 58 / 400 / 400 V external excitation 270 V forced ventilation 0.37 kW 220 / 380 V wave: Ø 55 mm shaft for tachogenerator: Ø 16 mm Flange: 320 x 320 mm used, tested ! Dimensions: 870 x 650 x 400 mm
used
DC motor with flange for forced ventilation VEM MFD 132.2-900 ( MFD132.2-900 ) TGL 39434 ( TGL39434 ) 0,2 / 10 / 16,4 kW 20 / 5000 / 3000 / 1650 rpm 42 / 400 / 400 V external excitation: 270 V flange for forced ventilation: 150 x 150 mm Flange: 250 x 250 / 270 x 280 mm used, tested ! Dimensions: 760 x 290 x 430 mm
used
DC motor VEM, ELBTALWERK MFD 132.4 - 900 ( MFD132.4-900 ) TGL 39434 ( TGL39434 ) 18,4 / 14,0 / 0,25 kW 1500/3000 / 4500 / 20 rpm 400 / 400 / 41 V DC external excitation: 270 V DC shaft: Ø 42 mm flange: 260 x 260 mm pulley: Ø 165 mm, 8x belt profile: 10 / 2 x 12 mm used, tested ! Dimensions: 940 x 290 x 360 mm
used
DC motor with external ventilation VEM MFDr 132.1-F 01 ( MFDr132.1-F01 ) TGL 39434 ( TGL39434 ) 0,15 / 20,8 kW 20 / 2840 rpm 30 / 400 V external excitation 330 V Forced ventilation: 0,18 kW 220 / 380 V Welle: Ø 42 mm Flange: 250 x 250 mm used, tested ! Dimensions: 800 x 540 x 350 mm
Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.
used
Forklift Hyster, model S7. 00XL, SN: BO24D04237T, nominal power 61.5 kW, capacity 7,000 kg, empty weight 9.310 kg, b. In 1996, Betreibsstd. approximately 11000, collgummibereift, particle soot filters, hydraulic fork adjustment. The forklift is available IN DORTMUND, GERMANY
used
CNC bending line for bending sheets up to a thickness of 8 mm and a width of 2500 mm. The machine is being sold due to its lack of use, it was practically unused. the machine is connected, functional and can be demonstrated in action.
used
Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...
used
Product number: 2728 Type: MFD Model: 51670-C-0014 Serial number: 208280 Year of construction: 2010 Working width: 400 mm Lanes: 4 pieces Product size: max 55 mm Outfeed height: 1150 mm Power: 230VAC, 50Hz, 2kW Dimensions: 950 x 1200 x 1800 mm For forming filled products
used
Two-way hydraulic bending machine, with CNC numerical control, with two bending jaws and deflection compensation (bombing). Upper instruments segmented. Year of manufacture 11/2008. These are two separate devices: a) material loading, b) double-sided bending machine with a table for feeding material incl. its rotation options. The machine was put into operation in 2009 and was only used for about half a year. It is possible to buy the bending machine itself, or just with the serving table. Bending capacities: material width: 2,500 mm thickness: max. 8 mm (material up to 400 N/mm2) edges with minimum height = up to 6 times the strength of the board minimum radius = up to 1.5 times the strength of the board.
used
Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type
used
Description: Workbench with: - 40 mm MFD wooden board - 4 pcs. Adjustable feet Length 1524 mm Width 650 mm Height above floor 885 mm Table load max. 1000 kg Approx. Onsite Dimension. (l x w x h): 1,530 x 650 x 880 mm, weight approx.: 62 kg