british flag
Resale Logo

metso lindemann 200x430 used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used rubber machines  SGT SERVIS,spol.s r.o.  http://www.sgt.cz 
banner logo
start page > keywords metso lindemann 200x430 > results
29 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2
126133173 505

LINDEMANN LUGES 420 for sale
Schrottscheren


Lindemann Luges scrap shear, type PH42, YOC unknown, shear force 420 t, down-holder 80 t, press box 4.2 x 1.8 x 0.9 m, hydraulic drive 75 kW, production 2.5 - 5 t/hr. Pump defect, not operational.

 
Lindemann Luges scrap shear, type PH42, YOC unknown, shear force 420 t, down-holder 80 t, press box 4.2 x 1.8 x 0.9 m, hydraulic drive 75 kW, production 2.5 - 5 t/hr. Pump defect, not operational.
 
20,000 €  
  DE   request
126154608 502

LINDEMANN BIMAX 12/110 K for sale


Manufacturer LindemannTyp BIMAX 12/110 KYear of construction 1993Hours of operation 34.887 hPress power main press 120 tonsPress power free stamper 24 tonsSpecific press capacity 9,91 kg/cm²Feed channel 2,000 / 1,400 x  ...
used machine
 
Manufacturer Lindemann
Typ BIMAX 12/110 K
Year of construction 1993
Hours of operation 34.887 h
Press power main press 120 tons
Press power free stamper 24 tons
Specific press capacity 9,91 kg/cm²
Feed channel 2,000 / 1,400 x 1,040 mm (l x w)
Bale size 1,100 x 1,100 mm (w x h) length adjustable
Driving motor 3 x 45 kW
Tying system 5-fold vertical, 3-fold horizontal, fully automated
Throughput rate at a
bulk weight of 30 kg/cbm approx. 10 up tp 12 tons/h
bulk weight of 50 kg/cbm approx. 18 up to 26 tons/h
bulk weight of 100 kg/cbm approx. 28 up to 40 tons/h
Bale weight 650 up to 950 kg
Volume hydraulic oil tank 2,500 L
Transport dimensions only baler approx. 11,800 x 2,400 x 3,550 mm (l x w x h)
Machine weight baler 35 tons
Accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.) Ruffler, 15 kW

Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
1993
24,500 €  
  DE   request
126063243 502

LINDEMANN BLT 614/55 for sale
Ballenpressen


Semi-automatic channel baling press Lindemann BLT 614/55 Price: 27 500 euro’s (netto price) The machine is used, but in very good condition. It works perfect, available to be sold every moment. If you have any anot ...
used machine
 
Semi-automatic channel baling press Lindemann BLT 614/55
Price: 27 500 euro’s (netto price)
The machine is used, but in very good condition. It works perfect, available to be sold every moment.
If you have any another questions, don’t hesitate to contact us!
Telephone: +48 783 891 132 or e-mail adress: biuro@bartontech.pl / bartontech.eu@gmail.com
Our webpage: abc.bartontech.eu
 
27,500 €  
  PL   request
126154618 502

LINDEMANN BIGRO 1027 V for sale


Manufacturer LindemannTyp BIGRO 1027 VYear of construction 1989Press power main press 100 tonsSpecific press capacity 12,1 kg/cm²Press power free stamper 24 tonsFeed channel 1,060 x 1,400 / 2,000 mm (l x w)Bale size 1,1 ...
used machine
 
Manufacturer Lindemann
Typ BIGRO 1027 V
Year of construction 1989
Press power main press 100 tons
Specific press capacity 12,1 kg/cm²
Press power free stamper 24 tons
Feed channel 1,060 x 1,400 / 2,000 mm (l x w)
Bale size 1,100 x 750 mm (w x h) length adjustable
Driving motor 2 x 55 kW
Connected load 138 kW
Tying system 4-fold vertical, fully automated
Throughput rate at a
bulk weight of 20 up to 30 kg/cbm approx. 8 up to 11 to/h
bulk weight of 40 up to 60 kg/cbm approx. 13 up to 16 to/h
bulk weight of 70 up to 100 kg/cbm approx. 19 up to 23 to/h
Bale weight 520 up to 720 Kg depending on material
Volume hydraulic oil tank 2,700 L
SPS controller (manuf., type) Siemens S5 115 U CPU 941 with E-Prom
Baler dimensions built up with hopper approx. 11,750 x 2,530 x 3,720 mm (l x w x h)
Transport dimensions only baler approx. 11,750 x 2,530 x 2,450 mm (l x w x h)
Machine weight baler approx. 26 tons
Accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.) Ruffler with adjustable feed channel length 1,400 up to 2,000 mm
Condition of the baler, conveyor belt Good condition for this age. Baler is actual in working condition.

Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Technical data conveyor belt
Manufacturer AMA Werke
Typ KGF 2000-20750
Year of construction 05/2006
Length feeding conveyor 9,800 mm
Effecting width 1,910 mm
Height drive axle over ground approx. 4,000 mm
Height of side wall feeding conv. 600 mm
Height of side wall elevating conv. 800 mm
1989
28,500 €  
  DE   request
125843094 1300

ROCK CRUSHING PLANT NEW Surplus for sale


NEW Surplus Rock Crushing Plant New Complete Large Rock Crushing Plant still in packing crates and never assembled. The complete rock crushing system is New never used or assembled. All equipment is still packaged in o ...

 
NEW Surplus Rock Crushing Plant
New Complete Large Rock Crushing Plant still in packing crates and never assembled.
The complete rock crushing system is New never used or assembled. All equipment is still packaged in original crates. Available from a cancelled project. The plant is being sold well below the new purchase price with considerable cost savings passed on to the new owner
Quick Summary of Equipment
2 SIZERS MMD (2 000 mt /h)
5 SCREENS METSO
5 SECONDARY & TERTIARY GIRATORY CRUSHERS (1 700 mt/h)
8 Belt Feeders STM, Secondary and tertiary Bins, Belt Conveyors with chutes, Primary Feed Bins, Primary Apron Feeders, Primary Grizzly, A/B Primary Sizers A & B, Primary Crushing Cranes, Belt Conveyor from Crushing Plant to Heap for Storage, Weigh Scale, Tramp Iron Magnet, Metal Detector Steel Structure, Static Grizzly, Electrics, Chutes, Supporting Structures, Initial & Capital Spare Parts, Consumables for start up, Special Tools for erection, Vendor Data & Drawings, Manuals, Export Packing, Engineering Drawings and Documentation and much more..

 
Price  
  NA   request
125894135 502

LINDEMANN Samer 9 for sale


Make: Svedala Lindemann type: scrap baling press of Delian 9 year: 1984 Rated output approximately 175 kW Dimensions in mm (Lxwxh) 8100 x 6900 x 3500 engine Dimensions in mm (Lxwxh) 5400 x 3550 x 2550 tank Loading ap ...

 
Make: Svedala Lindemann type: scrap baling press of Delian 9 year: 1984
Rated output approximately 175 kW
Dimensions in mm (Lxwxh) 8100 x 6900 x 3500 engine
Dimensions in mm (Lxwxh) 5400 x 3550 x 2550 tank
Loading aperture in mm (Lxw) 1950 x 940
Press box in mm (Lxwxh) 2750 x ca1400x1120
Door opening (Lxwxh) 300 x 300
Weight 50t package dimensions in mm (Wxh) ca. 300x300x300mm
Cycle time ca. 30-35 sec Insulaton
Throughput performance of steel about 9-11 t/h Insulaton

Description

Essentially it is the machine a very robust Lindemann Presse with large press box. Through the large fill box, knife, as well as wear plates are conserved.
The machine is completely overtaken us and checked through. The electrical system is brought to stand and equipped with a radio remote control. The hydraulic blocks, as well as all hydraulic cylinders are tested and new sealed.
The plant with us in the House commissioned is taken for the loss.
In addition the machine has a completely new hydraulic tank with new rule pumps and new engines.

Our deliveries and services include:
-compl. Baling press
-Hydraulikaggregat-
-Oil filter and cooling device
-electronic control
Rack
Wiring material between control panel - control panel - machine hydraulic
-Betriebs-and maintenance instructions, as well as spare parts documentation (drawings and pieces
 
Price  
    request
124191293 1300  

LINDEMANN 1800 MT - 7.5 - 193 MM for sale


Qty. 1 Second-hand extrusion press including hydraulic unit & billet furnace Trade mark: Lindeman Type: back loading standard Original year: 1972 1rst revamping: by Omav in 1988 2nd revamping: by Clecim in 2003  ...
used machine
 
Qty. 1 Second-hand extrusion press including hydraulic unit & billet furnace
Trade mark: Lindeman Type: back loading standard Original year: 1972
1rst revamping: by Omav in 1988 2nd revamping: by Clecim in 2003
3rd revamping: by Electric Sogema in 2010
Force: max 2000 MT at 310 bar Nominal force: 1800 MT at 280 bar
Billet dia.: 7.5 inches – 193 mm Billet length: max. 790 mm
1972
Price  
  DE   request
125366670 106

IWK PEKRD 315 for sale


pressure: 315 tthroat: 525 mmstroke: 20-200 mmno. of strokes: 40 Hub/minram - range of adjustment: 150 mmtable surface area: 1500x1000 mmram surface: 1300x900 mmtable height: 1050 mmtool hole in ram: Ø 70 mmtotal power  ...
used machine
 
pressure: 315 t
throat: 525 mm
stroke: 20-200 mm
no. of strokes: 40 Hub/min
ram - range of adjustment: 150 mm
table surface area: 1500x1000 mm
ram surface: 1300x900 mm
table height: 1050 mm
tool hole in ram: Ø 70 mm
total power requirement: 35 kW
weight of the machine ca.: 29 t
dimensions of the machine ca.: 2000x3200x4300 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
1970
Price  
    request
121488729 503

METSO LINDEMANN 1400PS - ZZ 175x260 for sale


Machine is already dismantled and stored. We have an independent inspection report from Metso Lindemann available. The packing list is also ready The machine has only about 3,500 operational hours Very complete line ...
used machine
 
Machine is already dismantled and stored.
We have an independent inspection report from Metso Lindemann available.
The packing list is also ready
The machine has only about 3,500 operational hours
Very complete line for an interesting price.

Make : METSO LINDEMANN
Model : ZZ 175x260 Top/Bottom discharge
Capacity (max. t/h): 45
Type of shredder: Hammer mill
Year : 1992
Purpose: Ferrous + Non Ferrous
Main power (HP): 1400HP
Drive: Electric
Number of rotors: 1
Length of rotor (mm): 2600
Diameter of rotor (mm): 1750
Feed opening (mm): 2500
Shred opening (mm): 2500
Output size (mm): -

Extra information:
Incl. hopper / pre-load table
Incl. magnet(s)
Incl. spare parts
Incl. wear parts
 
Price  
    request
119607065 1102

METSO B1CU40/120 for sale


 
Price  
  DE   request
121097763 505

LINDEMANN PZA8-55S for sale


Stock number: U2245 Used carbon steel hammer mill by Lindemann (Germany) type PZA8-55S. Machine has feeding inlet with dimensions length 1010 mm x width 660 mm x depth 450 mm. Milling chamber has dimensions: length 1430 ...
used machine
 
Stock number: U2245
Used carbon steel hammer mill by Lindemann (Germany) type PZA8-55S. Machine has feeding inlet with dimensions length 1010 mm x width 660 mm x depth 450 mm. Milling chamber has dimensions: length 1430 mm x width 550 mm. Inside the milling chamber is installed rotor with diameter 800 mm x width 550 mm. On the rotor there are 4 shafts with hammers. Each shaft has installed 14 hammers. Total number of hammers is 56 pcs. Each hammer has thickness 10 mm. Bottom discharge of product. Side doors with static knives from both sides of rotor are operated hydraulically. Rotor is directly driven by electric motor 75 kW, 1480 rpm, 380 V, 50 hz. Machine is mounted on carbon steel frame with three rubber supports.
 
Price  
  PL   request
119607067 2200

METSO L2DMH16PACAG for sale


 
Price  
  DE   request
75512845 502

LINDEMANN SUPLA for sale


Karossenquetsche LINDEMANN SUPLA Kasten: 5,0 m Antrieb: Elektromotor 30 iut#iutbeyeler.com +41-33-4374744
used machine
 
Karossenquetsche LINDEMANN SUPLA
Kasten: 5,0 m
Antrieb: Elektromotor 30

iut#iutbeyeler.com
+41-33-4374744
2013
Price  
  PL   request
18041274 500

LINDEMANN for sale


 
Price  
    request
72154454 503  

METSO 4000, 6000 for sale


Spare shafts, renovations, repairs,

 
Spare shafts, renovations, repairs,
 
Price  
  AT   request
69639177 502

LINDEMANN BIMAX 12/110 k for sale


Automatic baler Manufacturer: LINDEMANN Type: BIMAX 12/110 k technical data according to manufacturer's instructions: Power: 3 x 45 kW Pressure: 120 t specific press pressure: 9.91 kg / cm² Channel size: 1,1 ...
used machine
 
Automatic baler

Manufacturer: LINDEMANN

Type: BIMAX 12/110 k technical data according to manufacturer's instructions:
Power: 3 x 45 kW
Pressure: 120 t
specific press pressure: 9.91 kg / cm²
Channel size: 1,100 x 1,100 mm
Opening: 1,060 x 1.600 mm
Weight: ca. 35 tons
Throughput capacity at 20-30 kg / m ³: 10-12 tons/hour
Throughput capacity at 40-60 kg / m ³: 18-26 tonnes / hour
Throughput capacity at 70-100 kg / m ³: 28-40 tons / hour
 
Price  
  DE   request
69639175 502

LINDEMANN BIGRO for sale


Automatic baler manufacturer: LINDEMANN Type: BIGRO technical data: Pressing force: 80 t Filler: 1,600 x 1,000 mm Channel format: 800 x 1100 mm Power: 2 x 22 kW optional with: Press feed conveyor Conveyor ...
used machine
 
Automatic baler manufacturer: LINDEMANN

Type: BIGRO

technical data:
Pressing force: 80 t
Filler: 1,600 x 1,000 mm
Channel format: 800 x 1100 mm
Power: 2 x 22 kW optional with:

Press feed conveyor
Conveyor width: 1,200 mm
Task length: 800 mm
1976
Price  
  DE   request
50506947 505

LINDEMANN 400 for sale


Lindemann 400 alligator shears Blade length: 406 mm Drive: 7,5 KW Weight: 1070 kg Foot operated Wheels and truck intake overhaul

 
Lindemann 400 alligator shears
Blade length: 406 mm
Drive: 7,5 KW
Weight: 1070 kg
Foot operated
Wheels and truck intake
overhaul
 
Price  
  DE   request
30170395 505

METSO LINDEMANN 630T LIS for sale


Make : METSO LINDEMANN Model : LIS Type of shear: Stationary shear Year : 2006 Cutting force (t): 630T Box open (mm): 6.000 x 1.900 Box Closed (mm): 6.000 x 730 x 600 Blade Size (mm): 800 Hold down force (t): 160 ...
used machine
 
Make : METSO LINDEMANN
Model : LIS
Type of shear: Stationary shear
Year : 2006
Cutting force (t): 630T
Box open (mm): 6.000 x 1.900
Box Closed (mm): 6.000 x 730 x 600
Blade Size (mm): 800
Hold down force (t): 160
Pre compression 1 (t): 200
Pre compression 2 (t): 245
Pusher force (t): 120
Drive: Electric
Main power (kW): 2x 90
Capacity (t/h): 15

Extra information:
Incl. cabin
Incl. spare parts
Incl. wear parts
2006
350,000 €  
  NL   request
29968146 1300  

VOITH, METSO, JAGENBERG, 3600 MM - 100-318 GSM for sale


Qty. 1 Second-hand paper mill including calender, rewinder and coating lines Mfc.: Voith Built: 1966 with several overhaulings Type: Fourdrinier Width: 3.600 mm trimmed Paper grammage: 100 to 318 gr/m2 Speed: 215 ...
used machine
 
Qty. 1 Second-hand paper mill including calender, rewinder and coating lines
Mfc.: Voith Built: 1966 with several overhaulings Type: Fourdrinier
Width: 3.600 mm trimmed Paper grammage: 100 to 318 gr/m2
Speed: 215 to 600 m/min. Type of paper: Coated paper wood free
Disc filter: Mfc.: Voith Model 10 – 12 with 10 disc diameter 2.850 mm
Cleaner section Mfc.: VOITH Built: 2007
Model Economizer KS900 18 cones
Vertical screens 2 x Lamort SP 800 Fan pump Schneider model MP40
1966
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More METSO models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Recycling units MetsoSub a-300 pre-flotation

Auction name: Auction | Mining Auguste Victoria (52492) Public auction Online. Start of auction: 13 June 2017 16:00 GMT +0200 (Western Europe (DST) Closing time: 18 July 2017 11:00 GMT +0200 (Western Europe (DST)) The price listed is an opening ...

MetsoSub a-300 pre-flotation system

Auction name: Auction | Mining Auguste Victoria (52492) Public auction Online. Start of auction: 13 June 2017 16:00 GMT +0200 (Western Europe (DST) Closing time: 18 July 2017 11:00 GMT +0200 (Western Europe (DST)) The price listed is an opening ...

MetsoSub a-300 pre-flotation

Auction name: Auction | Mining Auguste Victoria (52492) Public auction Online. Start of auction: 13 June 2017 16:00 GMT +0200 (Western Europe (DST) Closing time: 18 July 2017 11:00 GMT +0200 (Western Europe (DST)) The price listed is an opening ...

PAPER MILL PLANT - REWINDER, COATERS VOITH, METSO, JAGENBERG,3600 MM - 100-318 GSM

Qty. 1 Second-hand paper mill including calender, rewinder and coating lines Mfc.: Voith Built: 1966 with several overhaulings Type: Fourdrinier Width: 3.600 mm trimmed Paper grammage: 100 to 318 gr/m2 Speed: 215 to 600 m/min. Type of paper: Coa ...

Shredders METSO LindemannZZ 175 x 260

Perfectly functioning 1,400 bhp Lindemann mill/shredder. Condition: perfect This equipment used to be operated inside a warehouse and was never exposed to bad weather. Machinery is still assembled and visitors are welcome to take a look at it. Li ...

Jaw crushers Metso-NordbergLT1315M

Auction name: Recycling machines in Lembeke ( Belgium) Public auction by order of party Concerned, incl .:TESAB Type 1340 and Type 1230 mid-range scalping screen (2015),Trackstack type 8042TDF track supply conveyor belt (2015),Metberg Enviro T3000 drum ...

Shredders lindemannzerdirator

Metso Lindemann shredder installation with Zerdirator, type SPM-U-160, yoc 1981 and rebuilt in 2013, shredder drive motor 750 hp at 6 kV, complete installation with inlet chute (1.6 m width), magnetic separation with Steinert drum, hand separation cabine, ...

Jaw crushers METSOC160

METSO C 160 Made 2006 complete installation Hammer Crane Feeder Cabine Metallic Structure electric Installation

Car Shredder Metso Lindemann, HenschelSuitable

We are looking for buying from Europe an used Car Shredder with about 1500 HP Motor. Particularly good working used plant made of Metso Lindemann or Henschel with in feed conveyor, magnetic drums, eddy current separators etc., G.P.Rajan General Manage ...

SHREDDER / SHREDDING PLANT FACILITY METSO LINDEMANNType 1A

This item is being sold on online auction through retrade.dk The given price is the auction reserve price. For all information, technical report and more pictures go to: retrade.dk/aitem?aitem_id=108840 Auction ends: 18.03.2013 Location: Co ...

METSO Debarking & ChippingStation 900 000 m3/year Rauma-Repola (METSO)Drum debarker, disc chipper

1312012 METSO Wood Debarking and Chipping Equipment 900 000 m3/annum This equipment forms a complete working wood log debarking and chipping plant. It is a part of former StoraEnso Summa Mills (Finland) and it was used for debarking spruce logs with an a ...

METSO Wood Debarking and Chipping Equipment 900 00 Rauma Repola (METSO)Double drum debarker

This equipment forms a complete working wood log debarking and chipping plant. It is a part of former StoraEnso Summa Mills (Finland) and it was used for debarking spruce logs with an approximate annual capacity of 900 000 m3. The process includes two sep ...

semi-mobile press shear Metso LindemannLIS 616

Lindemann press shear LIS 616 with lid compression and caterpillar diesel engine 230 kW, YOC 2010, only 2800 operation hours. cutting force: 630 t press box length: 6 m production 9- 15 t/h

American BELOTT newsprint production line American BELOTTAmerican BELOTT

A complete set of American BELOTT newsprint production line on sale! The rated speed is 1100 m/min and paper net width is 7900 ~ 8100 mm.It is imported in 1995,and it had been working from July 2000 to September 2010. It is renewed by METSO in 2007.After ...

A complete set of American BELOTT newsprint produc BELOTT1100

A complete set of American BELOTT newsprint production line on sale! The rated speed is 1100 m/min and paper net width is 7900 ~ 8100 mm.It is imported in 1995,and it had been working from July 2000 to September 2010. It is renewed by METSO in 2007.After ...

stationary cone crusher Metso MineralsHP 4, stationary cone crusher

Metso/Nordberg, HP 4 - stationärer Kegelbrecher neuester Bauart, Baujahr: 2011, Betr.Std. 800, Einlauföffnung bis max. 252 mm möglich - die Größe der Brechkammer (Einlauföffnung 252 mm - 169 mm - 116 mm oder 74 mm) kann nach Ihrem Wunsch verändert werden,

Cone Crusher HP 100 Modular MetsoHP 100 Modular / semimobil

Metso/Nordberg, HP 100 Modular - stationärer/semimobiler Kegelbrecher, Baujahr: 2011, Betriebstunden neue Maschine - volle Garantie auf die Maschine, Installierte Brechkammer \Medium\ (kann aber nach Wunsch des Kunden geändert werden), Antrieb durch Elekt

CVB 1845-4, Stationary 4-deck screen Metso MineralsCVB 1845-4, 4-deck screen

Metso/Nordberg, Typ: CVB 1845-4 - stationäre 4-Deck-Siebmaschine, Baujahr: 2008, Betriebsstunden: neue Maschine - war noch nicht im Einsatz, Siebfläche: 1800 mm x 4500 mm x 4, benötigter Elektroantrieb 15/20 kW, MV Vibrator - Typ: MV 3, Gewicht der Masch

wheelmobile screen METSOSW348

radmobile Siebanlage METSO Typ: SW 348 Baujahr: 2010 Sieb: Doppeldeck Exzentersieb, Siebgröße 2400 x 1200 mm,4 fach gelagert Bunkervolumen 5,3 m3 Aufgabehöhe 3 300 mm Aufgabebreite 3 800 mm Gurtbreite Beschickungsband 1050 mm Gurtbreite Produktfö

Get the latest machine offers by email: order newsletter