We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 112)
used
GEAR HOBBING MACHINE MAKE: KARATS MODEL: GH-20H YEAR: 1984 Specification : Table dia. : 2000mm (Bore dia.: 300mm) Max. dia. : 3000/4300mm (HOB/SINGLE) Max.Module: M30/35 (HOB/SINGLE) Max.dia of hob: 380mm Max.Length of hob: 510mm Machine size: 7000 x 4100 x 4300 (L x W x H) Weight: Approx 45Ton
used
workpiece diameter: 125 mmmodule: 4 Control: SIEMENS 840 C x-axis: 105 mmy-axis: 40 mmz-axis: 500 mmtotal power requirement: 47 kVAweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2,6x2,1x3,1 mwith measuring and palletizing system from Hörzer & Fehrenbachfor gearwheels (bore receiver)Workpiece diameter: 17-39.5 mmComponent height: approx. 6-15 mmOblique as well as straight toothedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 6256 Type: ZSTWZ Producer: WMW Created: 1954 Parameters: Maximum gear diameter (outer teeth): 1000 mm Table diameter: 900 mm Machine dimensions: 3000x1200x2300 mm External. internal module M 1 - 8
used
workpiece dia.: 80 mmmodule: 2,5 mmfixture slide travel: 220 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mmcutter length max.: 160 mmturning speed range: 200 - 5.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached exhaust system for dry processing: Ringler,- Noise insulation for dry milling machine- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- coolant device,- Automation unit: AMZ,The machine is in very good condition.For additional equipment information please referto the origin ...
used
Gear hobbing machine STAEHELY mod. SH25US + n. 2 Basket sanders D 1700 and D 1400
used
workpiece dia.: 100 mmmodule: 3.0 mmfixture slide travel: 400 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mmcutter length max.: 180 mmturning speed range: 50 - 12.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached extraction system: Ringler,- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle - AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- Workspace,- tailstock,- measuring device,- refrigeration system,- Industrial robots: Epson,- goods carrier,- conveyor belts,- control panel,The machine is in very good condition.For additional e ...
used
Key data: 3000 mm, 32
1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor
used
external diameter: 103 mmbore diameter in mm: 32 mmwidth: 108 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MAX DIAM 500, MAX MODUL 8 , PLC , DRO
used
external diameter: 182 mmbore diameter in mm: 50 mmwidth: 148 mmPWS A9° 71I37705 IIKB0902ooThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent ...
used
external diameter: 95 mmbore diameter in mm: 32 mmwidth: 83 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.
used
external diameter: 109 mmbore diameter in mm: 32 mmwidth: 103 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...
used
external diameter: 84 mmbore diameter in mm: 27 mmwidth: 85 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...
used
external diameter: 95 mmbore diameter in mm: 32 mmwidth: 101 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 700 mm
Cnc Gear Hobber PFAUTER P 750 R Year 1988 Table dia mm.700 Max axial stroke mm.700 Minimum tooth number 2 Machine weight Kg14000 Machine in perfect conditions, still installed and operational Original CNC SIEMENS PRIMA S Machine can work Rotors Head can rotate 360° Machine required space mm.4785 x 4995 x 4685 Complete with Change Gears, Conveyor Loading Robot STAUBLI CS8HP RX 270, RR Robotica Year 1988 Weight 200 Kg C.E. Marked Full working area protection
used
external diameter: 108 mmbore diameter in mm: 40 mmwidth: 108 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.
used
external diameter: 90 mmbore diameter in mm: 32 mmwidth: 122 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
NILES / KAPP MODEL ZE 630 CNC GEAR GRINDING MACHINE, SINUMERIK 840D CONTROL, MFG 2002 Max Gear Dia.: 650mm Min. Center Dist. Table to Wheel: 100mm Max. Center Dist. Table to Wheel: 19.69mm Helix Angle: 0.375” Stroke Length: 600mm Table Diameter: 25.59mm Table Bore / Depth: 125mm / 500mm Wheel Dia.: 350mm Grinding Wheel Width: 80mm Machine Weight: 20,000 Lbs. Complete With: Siemens Sinumerik 840D CNC Control Single Point Dresser Tailstock Paper Filtration Coolant
used
external diameter: 109 mmbore diameter in mm: 32 mmwidth: 117 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support
used
external diameter: 122 mmbore diameter in mm: 40 mmwidth: 138 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Gear hobber MODUL ZFWZ 2000x20/II Year: 1978 Max work diameter: 2100mm Table Size: 1800mm Max. D.P .: 20 Arbor diameters: 6: Ø60 (x2), Ø40 (x2), Ø32, Ø80 Change wheels: Yes Weight: 40 tons Gear hobber MODUL ZFWZ 2500/3 Year: 1980 Max work diameter: 2500mm Gear Width: 850mm Table Size: 1800mm Max. D.P .: 22/27 Diameter of hole in the table: 700mm Hob vertical traverse: 850mm Arbor diameters: 6: Dia. Ø60 (x3), Ø80 (x2), Ø50 (x1) Coolant tank: Yes Change wheels: Yes Tail stock: Yes Engine: 48KW Length: 7000mm Width: 3000mm Height: 4000mm Weight: 44500 kg
used
external diameter: 108 mmbore diameter in mm: 32 mmwidth: 116 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Gear hobber sharpener Kapp AS 305 B
used
external diameter: 186 mmbore diameter in mm: 40 mmwidth: 240 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.