presses used for sale

Inv. Num. : 7507 Type: 160 Producer: Rusko Generated: Parameters: Compressive force: 160 t

pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5696 Type: LE 160 Producer: Východoslovenské Strojárne Košice Created: 1977 Parameters: Compressive force: 160 t Maximum stroke rate per minute: 45 1/min Stroke: 20-120 mm Plunger adjustment: 100 mm Machine weight: 8700 kg

pressure: 300 tworking feed: 9 / 14 mm/secstroke: 600 mmcolumn daylight: 1550 mm: 600 adjustment of press crosshead: 1500 mmslide adjustment -horizontal: 3000 mmtank capacity: lfeed speeds: 9 mm/secreturn speed: 14 mm/sectotal power requirement: 18,5 kWweight of the machine ca.: 35 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7360 Type: CLH 630 1/8 Producer: Vihorlat Snina Created: 1985 Parameters: Compressive force: 630 t

pressure: 500 kNstroke: 40 mmthroat: 73 mmWorking height from to: 60 - 150 mmtable surface area: 115 x 70 mmweight of the machine ca.: 10 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7359 Type: TL-4-250 Producer: RTS Rakovník Created: 1997 Parameters: The machine is in good condition.

pressure: 2,5 kNstroke: 45 mmthroat: 90 mmWorking height from to: 80 - 220 mmtable surface area: 120 x 60 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm

pressure: 8,0 kNstroke: 40 mmthroat: 90 mmWorking height from to: 50 - 200 mmtable surface area: 120 x 160 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x410 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7047 Type: HSP 600 AZ-RN a Producer: Brunnhuber Created: 1969 Parameters: Compressive force: 610 t

pressure: 26,0 kNstroke: 60 mmthroat: 110 mmWorking height from to: 70 - 250 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 46 Kgdimensions: 310 x 140 x 475 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

pressure: 30 tstroke: 400 mmdaylight longitudinal/sideways: 720 x 295 mmdayligth: 900 mmliter capacity: 6,0 lfeed down: 7,5 mm/secfeed up: 12,5 mm/secMotor output: 3,0 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,35 x 0,85 x 2,2 mHigh-quality, hydraulic press can be used either by hand or by motoroperate.Cylinders can be moved sideways.Safety valve at cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 170 t, 3110 mm

Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel

pressure: 120 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secweight of the machine ca.: 1,175 tdimensions: 1620 x 1000 x 2430 mmManual and motor operation.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

pressure: 100 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 6,1 mm/secfeed up: 10,0 mm/secweight of the machine ca.: 1,0 tdimensions: 1460 x 850 x 2400 mmManual and motor operation.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6885 Type: C5 Producer: FINN POWER Created: 2007 Parameters: Compressive force: 300 kN Maximum length of the sheet plate: 3000 mm Maximum blade width: 1500 mm Max. sheet thickness: 8 mm Machine height: 2200 mm Machine length: 5570 mm Machine width: 5165 mm Machine weight: 13000 kg

pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6777 Type: PH4C 200 T Producer: Hidroliskan Created: 2015 Parameters: Compressive force: 200 t Table length: 1800 mm Table width: 1400 mm Distance between frame walls: 1400 mm Stroke: 600 mm Number of columns: 4 pieces

pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 820 x 300 mmdayligth: 900 mmliter capacity: 6,0 lfeed down: 5,4 mm/secfeed up: 8,3 mm/secMotor output: 3,0 kWweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,46 x 0,85 x 2,4 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4464 Type: PL-F UP Producer: OMC Created: 2014 Parameters: Compressive force: 105 t Under table length: 3500 mm Under-table width: 1300 mm Total power requirement: 3 kW Machine height: 1940 mm Machine length: 4000 mm Machine width: 1600 mm Machine weight: 4 t

pressure: 4,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 24 Kgdimensions: 160 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

pressure: 500 tcolumn daylight: 2600 mmstroke: 800 mmtable surface area: 6000 x 2500 mm: max. 800 mmadjustment of press crosshead: 5200 mmslide adjustment -horizontal: 1800 mmCapacity: 162 l/minfeed down: 9 mm/secfeed up: 14 mm/sectotal power requirement: 45 kWweight of the machine ca.: 50 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6682 Type: PDE 100 RF-HK Producer: Müller Created: 2000 Parameters: Control system: SIEMENS SIMATIC Compressive force: 1000 kN Stroke length: 330 mm Maximum stroke rate per minute: 55 1/min Adjustment of the plunger: 100 mm Main engine power: 11 kW Machine height: 2600 mm Machine length: 2200 mm Machine width: 2000 mm Machine weight: 7500 kg Equipment: Technical Documentation

pressure: 75 tstroke: 250 mmdaylight longitudinal/sideways: 800 x 215 mmdayligth: 170 - 885 mmworking pressure: 7,5 - 8.5 barweight of the machine ca.: 0,45 tdimensions: 1,2 x 0,8 x 2,1 mmHydraulic/pneumatic workshop pressCylinder can be moved sidewayspneumatic foot pedalWinch for table height adjustment2 pcs. pressing blocksCE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 900 x 300 mmdayligth: 900 mmliter capacity: 8,5 lfeed down: 8,0 mm/secfeed up: 13,3 mm/secMotor output: 3,0 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,6 x 0,85 x 2,4 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.