Horizontal belt sander Italian makeBandwidth: 130 mmPad size: 500 x 130 mmDrive power: 0.9 hpPower connection: 380 V, 50 HzDimensions L x W x H: 800 x 400 x 1000 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz  ...

3,2 mtr. hoch, Auswurf 2,7 mtr. More then 300 machines new and second hand on our seema .de ...

• more information

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 280x200 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 180 mm capacity 45 degrees: flat: 180x180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 110x110 mm total power requirement: 1,5/1,8 kW weight: 375 kg dimensions: 1700x1000x1650 mm Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carrie ...

: 36/72 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm dimensions of saw-band: 3650x27x0,9 mm total power requirement: 1,5/1,8 kW Overall size: 2130x1400x1950 mm Weight: 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position ...

dimensions of saw-band: 3320x27x0,9 mm : 40/80 m/min : 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm : 260 mm : 250 : 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm : 200 mm : 180 mm : 200x160 mm weight of the machine ca.: 640 kg dimensions of the machine ca.: 2140x1300x1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 4640x34x1,1 mm : 15-100 m/min : 515 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 90 degrees: flat: 510x320 mm : 320 mm : 320 mm : 350x320 mm : 230 mm : 230 mm : 230x310 mm : 320 mm : 320 mm : 380x320 mm : 250 mm : 250 mm : 250x320 mm total power requirement: 4 kW Weight: 1190 kg Overall size: 2000x1200x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desi ...