medy vac used for sale

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

; ready for operation

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Rotary vane vacuum pump oel circulation lubricated Performance: 12 months Manufacturer: Becker Type: U 4.250 SA/K motor: DS 400V suction power: 250m3/h final pressure: 3 mbar (abs.) . Generalueberholt Zubehoer: Oelfilling (Mineraloel) Delivery time: by arrangement Further details or technical advice via request; ready for use

Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat No.: 11879 Suction power: 25m3/h End pressure: approx. 0.005mbar engine: 400V Ds Please send us your pump request as a request; ready for use

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation

Vacuum pump Magnetic suspended compound nuclear pump Manufacturer: Osaka Type: TG 2003M Pumping speed: 200 l/s

; ready for operation

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...

The Becker KVT 3.140 oil-free rotary vane vacuum pump is a vacuum clamping system for CNC machine tables, designed for continuous operation at any pressure level. The KVT 3.140 is a direct-drive unit supplied with a high-performance TEFC electric motor. The Becker KVT has a reputation for being extremely quiet. It is ideal for applications where oil or water is undesirable. It uses long-life self-lubricating graphite composite blades for operation. Included: ▪ built-in inlet filter, ▪ safety valve, ▪ vacuum regulator. Hrwho8tby Additional info ADVANTAGES OF THE BECKER KVT OIL-FREE VACUUM PUMP Oil-free = no impurities. Quiet and cool operation. Compact design, small footprint. Low maintenance. Information: Dry, air-cooled Integrated suction filter Suction power: 129 m3/h Power: 4.0KW Rated voltage: 50Hz, 400V Dimensions: L=873, W=470, H=336mm We ...

The Becker KVT 3.140 oil-free rotary vane vacuum pump is a vacuum clamping system for CNC machine tables, designed for continuous operation at any pressure level. The KVT 3.140 is a direct-drive unit supplied with a high-performance TEFC electric motor. The Becker KVT has a reputation for being extremely quiet. It is ideal for applications where oil or water is undesirable. It uses long-life self-lubricating graphite composite blades for operation. Included: ▪ built-in inlet filter, ▪ safety valve, ▪ vacuum regulator. Additional info ADVANTAGES OF THE BECKER KVT OIL-FREE VACUUM PUMP Oil-free = no impurities. Quiet and cool operation. Compact design, small footprint. Low maintenance. Information: Dry, air-cooled Integrated suction filter Suction power: 129 m3/h Power: 4.0KW Rated voltage: 50Hz, 400V Dimensions: L=873, W=470, H=336mm Weight: 111kg ...

Sell a Thermovac TM21 vacuum meter with high vacuum sensor according to Pirani. (measuring range 500 bar to 1000mBar)

Vacuum station with 2 Busch vacuum pumps. Very little run!

Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland Type R96-20 Fabr. No. 9745 Year of construction 1999 Payload 2000 kg Centering mandrel 90 mm Suction surface Outer diameter 850 mm (plus seal)Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction surface 0.5 m2 Negative pressure min. -800 mbar Pumping speed approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 pieces Rietschle vacuum compressor, type VCE 100 Dimensions x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Net weight 2,5 ton.; used

Vacuum lifting device, vacuum lifter Custom-made as handling device for an industrial robot Year of construction 2008 Payload approx. 60 kg Suction foot spacing min. 120 x 150 mm Suction foot distance max. 700 x 600 mm- 4 pieces Suction feet 100 mm- 4 pieces Vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces Cross member, adjustable in width via servo drive from 150-600 mm- Suction foot distance adjustable via 2 servo drives from 120-700 mm - Suction cup adjustment via 3 servomotors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very complex and precise design with linear guides and trapetz threaded spindles- Flange plate for suspension or flanging on the robot Length: 105 cm, width: 66 cm, height: 54 cm Net weight approx. 120 kg good condition ; used

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

Vacuum pump oil Fomblin (Perfluoro Polyether) Model: YL VAC 16/6 Quantity: 1 KG corresponds to approx. 0.5L Delivery time: ex stock Alternative: Model: YL VAC 25/6 Quantity: 1 KG corresponds to approx. 0.5L Delivery time: from stock; ready for use

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Producer: Servotech Description: Vacuum mixer Servotech - Capacity 340 l - Out put 240 kg/h -Total power 4,0 KW - Dimension; 1500mm x 800mm x 1300mm -Total weight 650 kg - Manual operation - one mixing and discharging gear - Top and discharging covers opened manualy - Machine fully made with s/s

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: twisting and holding device All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Length: 90 Height: 165 Delivery time: 20 working days after advanced payment

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 170 Lenght: 130 Height: 190 Delivery time: 20 working days after advanced payment

For sale a refurbished vacuum tumler. New control cabinet !

REF-1902 TEC-MAQ VACUUM MEAT KNEADER-MIXER Meat kneader with vacuum system and T-shaped mixing paddles. Manufacturer: TEC-MAQ. Model: ALFA-150. Serial no. 1125/OC. Year: 1996. 380V. 5,7A. 2.25kW. Capacity: 150 litres. Meat capacity: 80-100kg. Equipped with mechanical variable speed drive. Inner dimensions: length 600mm, width 480mm, height 600mm. Outer dimensions: height 1,600mm, width 700mm, length 1,250mm.

Mobile dust extractor SCHUKO Type: Vacomat 200 XP Technical data: Connection Ø: 200 mm Filter cleaning: pneumatical (manual start) Volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 73 dB(A)

mobile extraction Brand:SCHUKO Typ: Vacomat 200 XPe Techncal data: Connection Ø: 200 mm Filter cleaning: motorical Nominal volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Dust level M, AWN 16 Noise absorbation: 73 dB(A) Test sign H3 / BGHM HO 123027

Mobile dust extractor SCHUKO Type: Vacomat 180 XP Technical data: Connection Ø: 180 mm Filter cleaning :pneumatical (manual start) Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Filter surface area: 13,5 m² Test sign H3 / BGHM HO 163002 Dust level M, AWN 16 Cone Sound absorbation: 74 dB(A)

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

We offer high-performance automatic vacuum can seamer based on Ferrum F240,F506G, F706G, F708G(4,6,8 heads) beverage seamer. The basic machine has been completely upgraded and adapted for vacuum food cans. These seaming machines are affordable relativle fast avaible and reliable for long time. Capacity from 350 to 750 cans/min. Lid diameter from 53 to 102 mm Can diameter from 50 to 99 mm Can height from 35 to 120 mm Standard equipment: • With progressive pre-vacuum feeder • With complete seaming tooling • With lid feeding system into the vacuum chamber • The machine has variable speed with frequency converter control • Independent synchronized infeed with frequency converter control • Main Electrical Control Cabinet INOX • Vacuum pump connection and controlled by main cabinet - Speeds below are guaranteed regardless of the type of the lids (standard NEO, ea ...

Laska vacuum cutter 330 liter Completely made of special stainless steel 330-liter bowl made of stainless steel Integrated vacuum pump Integrated loader for meat bins 2 mixing speeds 2 bowl speeds – fast and slow Unloading device: left side Main cover is made of special steel, stainless steel 6 pieces Knives Machine dimensions in cm: width: 310 depth: 400 height: 285 Weight: 5550 kg Main motor power: 120 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 5 KW Machine dimensions in cm: Width: 80 Length: 100 Height: 190 Delivery time: 20 working days after advanced payment

Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day

Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Specifications: - Load capacity horizontally with 3 suction plates 250 Kg - Suction plate dimension 2 pieces 700 x 700 mm - Suction plate dimension 1 piece 500 x 500 mm - Suction cup spacing adjustable in length to outer edge approx. 3000 mm - Vacuum motor power 0.85 kw - Connection 400 - Distance crane eyelet to suction plates approx. 700 mm - Space requirement W 3500 x D 750 x H 640 mm - Net weight approx. 150 kg

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 100cm Width: 165cm Height: 180cm Electric power: 1.1kW Delivery time: 30 working days after advanced payment

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 120cm Width: 200cm Height: 180cm Electric power: 3.5kW Delivery time: 30 working days after advanced payment

Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment

Vacuum lifter for wood make FEZER type Vacofix 274700Machine No: 83355 Year 1987Load capacity: 360 kgCarrying length: 5000 mmDead weight: 480 kgDimensions approx .: 5000 x 1800 x 700 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Seydelmann vacuum and cooking 750 litre bowl cutter. Has come direct from closed pate factory. Bought new in 2008, 2 identical machines available. We will have video of these running shortly.

Seitz Enzinger Noll rotary vacuum filter with 15 m2 filter area. Filter run to the last, because of the purchase of a larger machine.

Sample system for filling wet coleslaws, sauerkraut, red cabbage into prefabricated bags including vacuuming of the bags. Rotary type volume dosing station with the special feature that the product is pressed into the bag by a piston cylinder. The filled bags are then transferred to the rotating vacuum and sealing station. 10 individual chamber vacuumers - particularly suitable for products containing high liquid - ensure an excellent vacuuming result. Thermal transfer printer and product infeed unit included. PLC controlled, operation via touch screen. Suitable for a wide range of pouches such as composite and single-layer aluminium, PE, BOPP and PP films, paper, etc. - Specifications: Filling range: 20-1000g | max. number of machine cycles in neutral: 80 cycles/min | bag dimensions: W(80-160)xL(80-240)mm | dimensions of the machine LxWxH: 2100x1400x1700mm. Please note: This is only a s ...

Technical data Pulper for vacuum batch operation: Year of construction 2016 Operating hours approx. 3,500 hours Total volume pulper 40 m³ Working volume pulper approx. 28 m³ Stock consistency < 15 Material conveying speed from TKF 0.4 m/second Throughput rate up to 3.5 pulper batches per hour Drive power Pulper Hi-Torc drive 440 kW Max. Rotor speed 3,000rpm. Material types: Leached labels from breweries and mineral water bottling plants, wet-strength papers such as tissue production waste, security papers, etc., moisture content approx. 35 - 50%. Beverage carton and other film-coated papers, moisture content approx. 22% on average Kraft papers such as carrier bags, six-pack, sack papers without foil liner, ambient moisture content average 7% Corrugated cardboard waste and clean paper waste, ambient moisture average 7% Throughput calculation example in batch operation with leached label ...