machining center mikron used for sale

; NEW

5-axis machining center HG GRIMME GSF - MACHINING PLASTICS - RESINS - FOAM MACHINING PLASTICS - RESINS - FOAM machine MODEL GSF 20/10 - YEAR 2009: _ Ibag motor spindle HF80.2 A40 CIP, 40000U/min; 2.5/3.2kw, SKi _ manual tool measurement _ tool lift: height 725mm _ Work area dimensions: 24001200 _ store of 13 tools _ presence of an external HYFRA cooler _ Harmonic drive AG _ PLC: Siemens 840 D

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...

This AgieCharmilles MIKRON VCE 1400 PRO Vertical machining center was manufactured in the year 2009 in Switzerland and has 30978 hours, of which 13309 are spindle hours. It is equipped with Heidenhain iTNC 530 control unit and has 3 axis. The machine has a spindle speed of 100 - 10000 rpm, and includes a RENISHAW 3D IR Measuring Probe MP12, Tool measuring probe 3D TS27, and a Set of tool holders as additional equipment, is in very good condition and well maintained.

This AGIE CHARMILLES MIKRON HSM 400 LP Vertical Machining center was manufactured in the year 2013 in Switzerland and has 18727 production hours, of which 18377 are spindle hours. It is equipped with a HEIDENHAIN 530 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm.

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

CONTROLS   CNC controls FANUC SERIES 18-M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 850 mm   Y-axis travel: 600 mm   Z-axis travel: 560 mm TABLE   table surface (left-right): 1100 mm   table surface (front-back): 510 mm   workpiece load (max): 750 kg SPINDLE / HEAD   spindle revolutions (max): 8000 /min AXIS DRIVES   rapid traverse X: 24000 mm/min   rapid traverse Y: 24000 mm/min   rapid traverse Z: 20000 mm/min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2450 mm   space requirements -front/back-: 2400 mm   total height: 2815 mm  & ...

Excellent general condition. Used in plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting strengths, low machine load... Travel x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / Drive power main spindle 11 kW feed speed 0 - 30 m/min / table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max wzg diameter 63mm / WZG Long 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, type TS 220 / Cooling agent equipment / Spaenefoerderer / Suction (optional) Complete enclosure Heidenhain Control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-T Technical data Number of axis total: 5 Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 500 mm B axis Pallets: number: 4 Length: 400 mm Width: 400 mm Maximum workpiece weight: 300 kg Tool changer: Number of tools: 96 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 300 mm Max. tool-weight: 12 kg Time of tool changing: 2.5 sec Average chip-to-chip time: 6 sec Spindle nose: ISO: 40 DIN69871 Distance spindle nose to table: 100 - 600 mm Distance from vertical spindle to table: 20 - 420 mm Spindle speeds: stepless from: 0 rpm up to: 12000 rpm Feed range: 1 - 12000 mm/min Rapid traverse:: 20 m/min Air connect: 6 bar Volta ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426/430 Technical data Number of axis total: 3 Table length: 900 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y-axis): 550 mm Vertical travel (z axis): 500 mm Table load max.: 1600 kg Tool changer: Number of tools: 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 140 mm Tool lenght: 300 mm Max. tool-weight: 8 kg Time of tool changing: 5 sec Spindle nose: ISO: B40 Spindle speeds: from: 100 rpm up to: 12000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 15000 mm/min vertical from: 1 mm/min up to: 1 mm/min Feed range: 10000 mm/min Rapid traverse: long.: 30 m/min Rapid traverse: transversal: 30 m/min Rapid traver ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 640 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 150 mm Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 385 mm B axis swivelling range: -110 / +30 ° Table speeds: stepless up to: 4000 rpm Holding torque of the table: 400 Nm Tool changer: Number of tools: 96 Tool diameter max.: 50 mm Tool lenght: 130 mm Max. tool-weight: 1 kg Time of tool changing: 0.8 sec Average chip-to-chip time: 3 sec Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Rapid traverse:: 60 m/min Acceleration: 10 m/s Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 10 / 15 kW Torque max.: 8 / 12 Nm Machine´s w ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Technical data Number of axis total: 5 Number of spindles: 1 Circulary table diameter: 400 mm Longitudinal travel (X-axis): 850 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 520 mm Holding torque A-axis: 90 Nm Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 0 rpm up to: 24000 rpm Total power required: 30 kW Machine´s weight about: 8000 kg Overall dimensions machine: Various accessories: Coolant system Touch Probe Renishaw Tool length measurement 3D workpiece measurement device Chip conveyor NC Rotary and swiveling table Lamp Status light Laser tool setting system 3D workpiece measurement device

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Operating hours: 23546 Technical data Number of axis total: 5 Table length: 920 mm Table width: 380 mm Number of T-channels: 7 Distance of the T-slots: 50 mm T-channel width: 12H8 mm Table load max.: 250 kg Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 350 mm Vertical travel (z axis): 610 mm Tool magazine number of tools: 24 Tool diameter max.: 63 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 175 mm Max. tool-weight: 1.5 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: HSK: E40 / DIN 69893 Distance spindle nose to table: 97 - 704 mm Spindle speeds: stepless from: 30 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Voltag ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 426 / 430 Operating hours: 24453 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 1050 mm Table width: 590 mm Number of T-channels: 8 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Table load max.: 400 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer:: TC 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 110 mm Tool lenght: 250 mm Max. tool-weight: 6 kg Time of tool changing: 5 sec Average chip-to-chip time: 7 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle speeds: stepless from: 100 rpm up to: 20000 rpm Feed range: 1500 mm/min Rapid traverse:: 22 m/min Air connect: 6 - 7 bar Voltage 50 Hz  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 0 Technical data Table length: 700 mm Table width: 500 mm Number of T-channels: 5 Distance of the T-slots: 100 mm T-channel width: 18H7 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 540 mm Tool changer: Number of tools: 24 Tool diameter max.: 77 mm Diameter with free adjacent pockets: 115 mm Tool lenght: 305 mm Max. tool-weight: 6 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: ISO: B40 Vertical spindle speeds: stepless from: 100 rpm up to: 10000 rpm Rapid traverse: long.: 24 m/min Rapid traverse: transversal: 24 m/min Rapid traverse: vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 12  ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of axis total: 4 Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 630 mm Vertical travel (z axis): 700 mm Dimension of the workpice: Width: 700 mm Table load max.: 500 kg Table divisions (B): 0.001 ° Table speed: 30 rpm Holding torque A-axis: 4000 Nm Tilting moment: 8000 Nm Pallets: number: 10 Length: 500 mm Width: 500 mm Maximum workpiece weight: 750 kg Time of changing palets: 7 sec Tool changer: Number of tools: 130 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 150 mm Tool lenght: 350 mm Max. tool-weight: 10 kg Time of tool changing: 2.5 - 4.5 sec Average chip-to-chip time: 4 sec Spindle nose SK: 40 DIN69871-A40 Spindle speeds: stepl ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series Technical data Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 520 mm Vertical travel (z axis): 510 mm Tool magazine number of tools: 64 Tool diameter max.: 78 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 300 mm Max. tool-weight: 5 kg Average chip-to-chip time: 3.3 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle diameter: 70 mm Spindle speeds: stepless up to: 10000 rpm Feed range: 1 - 10000 mm/min Rapid traverse:: 60 m/min Max. Feed force: 7000 / 12000 N Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22 / 51 kW Total power required: 80 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5027 mm Width: 2628 mm Height: 3278 mm Space requireme ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 31i-Model AB Technical data Table length: 400 mm Table width: 400 mm Table load max.: 400 kg Maximum swing circle of up to: 600 mm Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 560 mm Vertical travel (z axis): 560 mm Pallets chanching device: number: 12 Length: 400 mm Width: 400 mm Maximum workpiece weight: 400 kg Transport weight: 100 kg Tool magazine number of tools: 120 Spindle nose: BT: 40 Distance from horizontal spindle to table: 90 - 650 mm Spindle speeds: stepless from: 12 rpm up to: 12000 rpm Work feed rate: 20 m/min Rapid traverse:: 60 m/min Air connect: 6 bar Voltage 50 Hz 3x: 380 Volt Spindle power: 22 kW Total power required: 65 kW Total power required: 380 kVA Machi ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 27052 Technical data Number of axis total: 4 Number of spindles: 1 Table load max.: 500 kg Longitudinal travel (X-axis): 560 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 850 mm Diameter: 630 mm Table divisions (B): 360 ° Resolution: 0.001 ° Table speed: 40 rpm Holding torque of the table: 1580 / 2300 Nm Torque max.: 1550 Nm Pallets chanching device: Length: 400 mm Width: 400 mm Maximum workpiece weight: 500 kg Tool changer: Number of tools: 120 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 400 mm Max. tool-weight: 12 kg Spindle nose: HSK: 63 DIN 69893 Form A Spindle diameter: 225 mm  ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE Fanuc Series 18i-MB5 Operating hours: 34031 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 770 mm Table width: 290 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y-axis): 270 mm Vertical travel (z axis): 310 mm Drill capacity: 12 mm Max. taping diameter M: 8 Tool changer: Number of tools: 24 Tool diameter max.: 47 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 160 mm Max. tool-weight: 1.2 kg Time of tool changing: 0.8 / 2.3 sec Average chip-to-chip time: 2.2 sec Spindle nose: HSK-A: 40 DIN 69893 Spindle speeds: up to: 30000 rpm Rapid traverse:: 75 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 7 kW Total power required: 14 kW Various acces ...

CNC Vertical Machining Center DECKEL-MAHO Model: DMC 70V Manufacturer: DECKEL-MAHO Model: DMC 70V New in: 1999 Condition: very good, complete Technical details Table size: 900x550 mm Max. table load: 600 kg X travel: 700 mm Y travel: 550 mm Z travel: 500 mm Spindle speed: 30 000 rpm Spindle taper: HSK 50 Total power requirement: 10/15 kW Dimensions: 3900x3700x3000 mm Machine weight: approx 8000 kg

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 31i Technical data Table length: 750 mm Table width: 450 mm Table load max.: 300 kg Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 350 mm Dimension of the workpice: Length: 750 mm Width: 635 mm Height: 250 mm Tool magazine number of tools: 60 Tool diameter max.: 80 mm Tool lenght: 250 mm Max. tool-weight: 7 kg Time of tool changing: 4.8 sec Spindle nose: HSK: E50 Distance spindle nose to table: 150 - 500 mm Spindle speeds: stepless from: 300 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Air connect: 4 - 8 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 17/13 kW Total power required: 50 kVA Machine´s weight about: 7700 kg Overall ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Technical data Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 700 mm Table divisions (B): 360´000x0.001 ° Table speeds: up to: 15 rpm Pallets: number: 9 Length: 500 mm Width: 400 mm Time of changing palets: 14 sec Transport weight: 500 kg Tool changer: Number of tools: 144 (2x72) Max. tool-weight: 12 kg Time of tool changing: 6 - 8 sec Spindle nose: ISO: 45 Horizontal spindle speeds: stepless from: 40 rpm up to: 10000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 10000 mm/min transversal from: 1 mm/min up to: 10000 mm/min vertical from: 1 mm/min up to: 10000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 kW Total  ...

CNC Vertical Machining Center MORI SEIKI mod. SV-503 Manufacturer: Mori Seiki Model: SV-503 YOM: 2001 Technical details: Table size: 1300x600 X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 660 mm Spindle drive motor: 30 HP Spindle speed: 10000 rpm Tool changer: 30 ATC Spindle taper: 40

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 430 Technical data Number of axis total: 5 Rotary table:diameter: 280 mm Table load max.: 200 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Dimension of the workpice: Height: 215 mm Diameter: 280 mm B axis swivelling range: + / - 115 ° C axis Tool changer: Number of tools: 30 Average chip-to-chip time: 5.5 sec Spindle nose: HSK: 40 Spindle speeds: stepless from: 20 rpm up to: 36000 rpm Feed range: 1 - 30000 mm/min Rapid traverse:: 35 m/min Measurement system: Resolution: 0.1 µm Input resolution: 0.1 µm Display step: 0.1 µm Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 22 kVA Noise level: 78 dB (A) Machine´s weight abo ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Technical data Number of axis total: 3 Table length: 1200 mm Table width: 625 mm Table load max.: 1200 kg Longitudinal travel (X-axis): 1100 mm Transversal travel (y-axis): 625 mm Vertical travel (z axis): 500 mm Tool changer: Number of tools: 24 Tool diameter max.: 80 mm Tool lenght: 250 mm Max. tool-weight: 7 kg Spindle nose SK: 40 Distance spindle nose to table: 150 - 650 mm Spindle speeds: stepless up to: 15000 rpm Work feed rate: 12 m/min Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 11 / 18.5 kW Total power required: 45 kVA Machine´s weight about: 9710 kg Overall dimensions machine: Length:  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 12463 Technical data Number of axis simultaneous: 3 Table length: 700 mm Table width: 630 mm Table load max.: 800 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 30 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Rapid traverse:: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Time under power: 43869 Hour Operating time: 12463 Hour Working time: 26214 Hour Spindle run time: 8612 Hour Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dim ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 34729 Technical data Number of axis simultaneous: 4 Table length: 900 mm Table width: 600 mm Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 50 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dimensions machine: Length: 4000 mm Width: 3700 mm Height: 2500 mm Various accessories: Paper filter facility Chip conveyor Dividing attac ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 3200 Technical data Number of axis total: 5 5-sided machining Rotary table:diameter: 400 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Table load max.: 400 kg B axis swivelling range: -115/+30 ° C axis: 360 ° Tool changer:: TC 30 Spindle speeds: stepless from: 50 rpm up to: 20000 rpm Feed range: 22 mm/min Rapid traverse:: 22 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 5.5 kW Total power required: 18 kW Noise level: 75 dB (A) Machine´s weight about: 7500 kg Length: 2500 mm Width: 1600 mm Height: 2650 mm Various accessories: Coolant system Touch Probe Renishaw Electronic hand held control Handwheel electroinic Spindle ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16i-MB Operating hours: 4915 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 630 mm Longitudinal travel (X-axis): 815 mm Transversal travel (y-axis): 745 mm Vertical travel (z axis): 500 mm Dimension of the workpice: Height: 500 mm Diameter: 630 mm Table load max.: 400 kg Swivel angle (a-axis): -120 / +30 ° C axis: 360 ° Tool magazine number of tools: 50 Tool diameter: 75 mm Tool diameter max.: 300 mm Diameter with free adjacent pockets: 150 mm Max. tool-weight: 10 kg Spindle nose: BT: 40 Distance spindle nose to table: 100 - 600 mm Spindle speeds: stepless from: 20 rpm up to: 20000 rpm Feed range: 0 - 24000 mm/min Rapid traverse: long.: 50 m/min Rapid traverse: transversal: 50 m/min Rapi ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HAAS AUTOMATION Technical data Table length: 1219 mm Table width: 457 mm Table load max.: 794 kg Longitudinal travel (X-axis): 1016 mm Transversal travel (y-axis): 508 mm Vertical travel (z axis): 635 mm Pallets: number: 2 Tool changer: Number of tools: 40 Tool diameter max.: 64 mm Diameter with free adjacent pockets: 127 mm Tool lenght: 330 mm Max. tool-weight: 5.4 kg Time of tool changing: 2.8 sec Distance spindle nose to table: 742 mm Spindle speeds: stepless up to: 12000 rpm Work feed rate: 21.2 m/min Rapid traverse:: 35.6 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22.4 kW Machine´s weight about: 6300 kg Various accessories: Coolant system: 208 l Tool setter Renishaw Pallets chanching device:

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 2 Number of axis total: 5 Longitudinal travel (X-axis): 750 mm Transversal travel (y-axis): 860 mm Vertical travel (z axis): 850 mm Table divisions (B): 0.001 ° Pallets: number: 12 Length: 630 mm Width: 630 mm Tool changer: Tool magazine number of tools: 334 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 11000 rpm Feeds: X axis: 32 m/min Y axis: 32 m/min Z axis: 32 m/min Spindle motor: 25 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor

CNC machining center cover MAHO DMC 60 U hi-dyn, 2 pallets, head universal Year: 2002 country of origin: Germany workspace: X: 600 mm Y: 700 mm w: 600 mm pallet 630 x 500 mm spindle speed: 18 000 RPM tool Magazine: 120 St Tool holder: SK 40 control CNC HEIDENHAIN 422 weight: 9 000 kg total connection requirements: 44 kVA

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 0 Technical data Number of axis total: 5 Longitudinal travel (X-axis): 3000 mm Transversal travel (y-axis): 2000 mm Vertical travel (z axis): 2000 mm vertical travel (Y-axis): 1720 mm Table divisions (B): 0.001 ° Swivel angle (a-axis): 175 ° Pallets: number: 8 Length: 1250 mm Width: 1250 mm Transport weight: 3000 kg Tool changer: Tool magazine number of tools: 640 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 3000 rpm Feeds: X axis: 40 m/min Y axis: 40 m/min Z axis: 30 m/min Spindle motor: 50 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 7176 Technical data Number of axis total: 4 Table length: 6400 mm Table width: 1000 mm Table load max.: 1500 kg Longitudinal travel (X-axis): 6000 mm Transversal travel (y-axis): 1000 mm Vertical travel (z axis): 1140 / 1200 mm B axis swivelling range: +/-90 ° Milling head divisions (B): 0.001 ° Tool magazine number of tools: 80 Tool diameter max.: 100 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Time of tool changing: 6 sec Spindle nose: HSK-A: 100 Spindle speeds: stepless from: 45 rpm up to: 9000 rpm Feeds: longitudinal from: 1 mm/min up to: 9999 mm/min transversal from: 1 mm/min up to: 9999 mm/min vertical from: 1 mm/min up to:  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN MILLPLUS Operating hours: 8000 Technical data Number of axis total: 5 Table length: 900 mm Table width: 630 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 650 mm Vertical travel (z axis): 550 mm Milling head divisions (B): 90 ° Tool changer: with double gripper Number of tools: 25 Tool diameter: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 315 mm Spindle nose: ISO: 40 Spindle speeds: up to: 6300 rpm Vertical spindle speeds: Feed range: 1-15000 mm/min Rapid traverse:: 15 m/min Spindle motor: 16.2 kW Total power required: 29 kW Machine´s weight about: 5500 kg Overall dimensions machine: Length: 3100 mm Width: 2300 mm Height: 2500 mm Various accessories: Coolant system Lamp

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 16i-MA Technical data Table length: 1400 mm Table width: 650 mm Longitudinal travel (X-axis): 1250 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 750 mm Table load max.: 1500 kg Pallets chanching device: number: 2 Length: 1400 mm Width: 650 mm Time of changing palets: 45 sec Transport weight: 1500 kg Tool changer: Number of tools: 40 Tool diameter: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 20 kg Time of tool changing: 5 / 11 sec Spindle nose:: n° 50 Distance from vertical spindle to table: 100/850 mm Spindle speeds: stepless up to: 4000 rpm Vertical spindle speeds: stepless from: 20 rpm up to: 4000 rpm Torque max.: 662 Nm Rapid traverse:: 15 m/min Voltag ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 430 Operating hours: 8565 Technical data Number of axis simultaneous: 3 Table length: 900 mm Table width: 543 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 525 mm Vertical travel (z axis): 500 mm Position accuracy: 0.010 mm Table load max.: 350 kg Resolution: 0.001 Tool changer: Number of tools: 25 Tool diameter: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 315 mm Max. tool-weight: 8 kg Spindle nose SK: 40 Vertical spindle speeds: stepless from: 20 rpm up to: 12000 rpm Feed range: 20 - 10000 mm/min Input resolution: 0.001 mm Rapid traverse: long.: 18 m/min Rapid traverse: transversal: 18 m/min Rapid traverse: vertical: 18 m/min Vertical quill travel: 90 mm Air conne ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: VISEL VSC 1025 M (2013) Technical data Number of axis total: 5 Table length: 510 mm Table width: 315 mm Longitudinal travel (X-axis): 305 mm Transversal travel (y-axis): 254 mm Vertical travel (z axis): 305 mm up to Tool changer: Number of tools: 12 Time of tool changing: 4 - 5 sec Spindle nose: BT: 30 Spindle speeds: number (steps) stepless from: 300 rpm up to: 8000 rpm Total power required: 8 kW Machine´s weight about: 2900 kg Overall dimensions machine: Length: 2240 mm Width: 1250 mm Height: 2400 mm Various accessories: Set of toolholders: 7 pcs Coolant system Tool setter Renishaw: TS27R Dividing attachment 4th and 5th axis: LEHMANN Type: 410 Oil mist extractor fire extinctor

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426 Operating hours: 1800 Technical data Number of axis total: 4 Table length: 1150 mm Table width: 700 mm Turret stations:: 60 Longitudinal travel (X-axis): 1000 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 750 mm Tool changer:: TC 30 Number of tools: 30 Tool diameter: 77 mm Diameter with free adjacent pockets: 115 mm Tool lenght: 305 mm Spindle nose: HSK: A63 Distance from vertical spindle to table: 115 mm Spindle speeds: stepless up to: 24000 rpm Feed range: 1500 mm/min Rapid traverse:: 22 m/min Voltage 50 Hz 3x: 400 Volt Total power required: 40 kW Time under power: 21859 Hour Operating time: 7308 Hour Spindle run time: 1564 Hour Machine´s weight about: 10500 kg Overall dimensions  ...

2 identical machines are available ! Make : MAZAK Type: FF-660 Built: 2000 Control : FANUC 18iM Technical Dataen Axles ( X/Y/Z ) : 660 x 660 x 660 mm Pallet size: 500 x 500mm Tool holder: ISO 40 Number of tools: 24 Station Spindle speed: 15000 rpm Engine power: 15kW B-axis movement: 1 degree indexation Accessories/Description: Both machines are still in production, with the machines a total of 4 towers and 80 tool holders. The cover of the Y and Z axes has been renewed. various tools are delivered with the machine. Chip conveyors and documents are available.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 64731 Technical data 5-sided machining Number of axis simultaneous: 5 Table length: 320 mm Table width: 320 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Length Table load max.: 75 kg Table divisions (B): -115 / +30 ° Table divisions (C): 360 ° Pallets:: 3R GPS Pallets chanching device: Automatic pallet change-unit (number of paletts) number: 6 Length: 320 mm Width: 320 mm Transport weight: 200 kg Tool changer: Addet tool-holder magazine Number of tools: 170 Spindle nose:: HSK-A 63 Spindle speeds: stepless up to: 20000 rpm Feeds: Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 7700 kg Overall dimensions machine: Leng ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN MillPlus /3R-WorkMaster +3R-WorkShopManager Operating hours: 30452 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Circulary table diameter: 630 mm Number of T-channels: 9 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Centering bore diameter: 50H6 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 1000 mm Diameter: 920 mm Table load max.: 500 kg Table divisions (B): 360 ° A axis Swivel angle (a-axis): +45/-30 ° Holding torque A-axis: 3866 Nm Clamping torque C-axis: 6008 Nm Torque max.: 2650 Nm Tool changer: Number of tools: 180 Tool diameter: 80 mm Diameter with free adja ...

Table size X 5300 Y 1300 mm 800 mm wide waste outfeed conveyor 2 CNC Z axes Drilling head with 21 vertical drill spindles and 4x2 horizontal drill spindles with integrated grooving saw rotatable through 90° Extraction shoe for the vertical drill spindles and chip & dust extraction of the horizontal spindles integrated in the drilling head 10 kW main spindle, vector-controlled a 3600 C axis, fully interpolating

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 75960 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 620 mm Dimension of the workpice: Height: 550 mm Diameter: 500 mm Table divisions (B): 0,001° ° A axis: 145° (+35/-110°) Table speed: 30 rpm Pallets:: System Staflex number: 4 Length: 500 mm Width: 500 mm Transport weight: 200 kg Tool changer: Number of tools: 60 Tool diameter max.: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Spindle nose:: HSK-A 100 Spindle speeds:: STEP TEC stepless up to: 12000 rpm Torque max ...