We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 503)
used
COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.
used
machine measurements: -- mmmachine weight: 1.500 kgpower capacity: 30 kWCondition: used,Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIScomplete plant ready for operation, incl. hopper with lidand platform.Special accessories:- automatic star-delta start-up- gear motor with transport screw- lid with limit switch- quick-change sieve- Hopper can be lifted manually- Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front doorTechnical data:- Hopper volume: 0.9 m³- Operating voltage: 3x 400 V- Motor power main drive: 30 kW, 1,500 rpm- Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm- Weig ...
used
Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
new
: 600 x 800 mmMotor output: 18,5 kW: 0,6 m³Diameter of the motor: 252 mmDimensions (L/W/H): 1800x1230x1640 mmWeight: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
used
recycling shredder: . Number of shafts: 2 : und Plastikmüll weight: 22 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
used
WAGNER SINGLE SHAFT SHREDDER WS 70, Only less than 7.000 worked hours, Length:4.680 mm, Width:3.100 mm, Height:2.410 mm, Work area:1.800 x 1.600 mm, Rotor length:1.800 mm (new 2024), Rotor diameter: 588 mm, Number of knives: 104 pc., Drive power: 90 kW, Screen size:40 mm, extraction screw (new 2024), Weight:approx. 12.000 kg, Very good conditions, [Watch Constructors video for this machine](https://www.youtube/watch?v=rDnrhGHvsBQ&ab_channel=WAGNERMasc hinenbauGmbH)
used
Wood shredders, plastic shredders, garbage shredders, two-shaft shredders, shredders, shredders used Manufacturer: I.S.V.E. Srl Type: 80-80 D Year of construction: 2003 Insertion approx. 1500 x 900 mm Insertion height approx. 1600 mm Drive 2x 9 kW 380 V Dimensions: approx. 2400 x 1800 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
WEIMA SINGLE SHAFT HYDRAULIC SHREDDER WLK1500, constructed in 2019, 1.500 mm. wide rotor, hydraulic side ram, hydraulic power station, upper ram for bulky scraps, 110 kw drive, including extraction belt with magnetic drum, electric panel, machine offered checked and reconditioned, about 4.000 worked hours, see more details in the Constructors brochure attached, WORKING WIDTH: 1.500 mm. (59), INSTALLED POWER: 110 kw
used
Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg
new
SINGLE SHAFT SHREDDER, rotor width 1060 mm, Shredding surface 800x1060 mm, Rotation speed 80-140 rpm, Grid with compartments measuring from 60 mm² to 5,000 mm², 1 rotor diameter 370mm, Safety module with self-monitoring and efficiency control functions of the safety devices, Electric motor 45 kW - 400V/50Hz, Multifunction PLC, Automatic ram slowdown device based on electrical absorption, Electrical control panel, Loading hopper in 5mm thick sheet metal., Hopper 1000, 1330x1080x850h mm, 1.2 m³ volume, width: 1.000 mm. (39.37), Power: 45 kw, AVAILABILITY: 1 month
used
AGICOM recycling machines: Cable shredder/granulator IRS PM1840 used. Technical Data Cable Shredder: 5.5 kW, 32 A Perforated screen 10 mm; LxWxH: 135x120x212 cm approx. 550 kg
used
VECOPLAN VAZ 220/200 KNF, single shaft shredder for plastics, constructed in 2000, imfeed width 2200 mm, working width: 2000 mm, Rotor Ø 495 mm, n.56 knives size 60 x 60 mm., Rotor speed 125 rpm, 132 kW drive, 400V 50 Hz, Machine weight : about 14 tons, Upper ram, feeding hopper, various screens available, Electrical panel, Users manual, drawings available, This machine is offered totally reconditioned, (last group of photos is of a twin machine just reconditioned), width: 2.000 mm. (78.74), Power: 132kw
used
Recycling machine trade AGICOM- Pedergnana OG: The mulcher is used to recover iron and aluminum from high-voltage lines. Cable cross-sections: Ø 10 - 50 mm Power consumption: approx. 31 kW / 380 V Dimensions: approx. (L x W x H) 1,300 x 1,300 x 1,740 mm Weight: approx. 3,500 kg
used
WEIMA WLK 18 SJ SUPER JUMBO SINGLE SHAFT SHREDDER, Totally refurbished in 2020 with replacement of electric circuits + motor + rotor + board .., 219 worked hours after refurbIshing, loading hopper 1.800 x 1.880 mm., hopper capacity approx 5,4 m3, rotor width 1.800 mm, rotor diameter 482 mm, 100 rpm, 75 kw drive, weight : about 12.000 kg, installed power : 75
new
Recycling machine trade AGICOM- Pedergnana OG: Shredder TecnoecologyTG 680 The cutting unit of the pre-shredder consists of 10 rotating knives and 11 fixed counter knives. A hydraulic pusher is included. Weight: approx. 1,650 kg; Throughput: max. 300 - 500 kg/hour. Application Copper and/or aluminum cables, non-ferrous metals, rubber, plastics, wood, and composite materials.
used
CMG SINGLE SHAFT SHREDDER TODAY AT REDUCED PRICE, mod TRM 1500, 80,5 kw drive, rotor width 1.500 mm., rotor diam. 400 mm., constructed in 2018, machine offered reconditioned, Possible addition of [extraction belt with magnetic drum](https://www.germanplast.eu/listings/4115563-used-extraction-belt -450-x-3-500-mm-magnetic-drum) (as new +14.000€), Constructors description:, High efficiency shredders: patented blade design, Patented shredder blade design provides first-class cutting precision. The blade is inserted into a V-shaped opening on the rotor. This type of assembly guarantees the highest resistance to mechanical stress and the best cutting performance. The precision of shredding provides dimensional homogeneity and the absence of small particles. In addition to the unique design of the blades, each CMG shredder is equipped with advanced controls to independently adjust the motor ...
used
For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg
used
WEIMA SIZE REDUCTION LINE, Including :, loading conveyor belt, construction year 2002, WEIMA WLK 6 single shaft shredder, construction year 2005, rotor width 800 mm., rotor diam. 370 mm, 45 kw drive, screen, extraction belt, magnetic drum, WEIMA GRANULATOR NZ3 10/600, soundproof cased, construction year 2005, 22 kw drive, extraction blower, pneumatic system, Big Bag filling station
used
Untha RS40 Shredder Year: 12/2019 Technical data RS40 Rated capacity 30/37/44 kW Cutter clearance 750/1000 x 700mm Number of shafts 4 pcs Speed of the main shafts 24 rpm Speed of the secondary shafts 32 rpm Ø perforated screen 15-40 mm Weight 3300/3600kg
new
SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...
used
Alligator shear ideal for processing weapons Fully Guarded As New 660mm blade length
new
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
new
Cutting unit consisting of: 7 rotating blades and 8 fixed counter blades. Incl. hydraulic presser Technical data: Throughput: Depending on the material and hole screen Power consumption: 17 kW Dimensions: (L x W x H) 154 x 115 x 170 cm Hopper: 1,180 x 1,120 mm Weight: approx. 1.200 kg Hole screens: 2 pieces (10 mm and 15 mm) Application for: Materials such as copper, aluminum cable, non-ferrous metals, rubber, plastics, wood, and composites
new
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
new
Shredder TG 500 The cutting unit of the pre-shredder consists of 7 rotating knives and 8 fixed counter knives. A hydraulic pusher is included. Technical data Throughput performance: depending on material and hole sieve Power consumption: 17 kW Dimensions: (L x W x H) 154x115x170 cm Hopper: 1,180 x 1,120 mm Weight: approx. 1,200 kg Hole sieds: 2 pieces (10 mm and 15 mm) Application: Crushing of copper or aluminium cables, non-ferrous metals, rubber, plastics, wood and composites
new
SINGLE SHAFT SHREDDER 37 kw, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 700x1250, electro-welded sheet metal hopper for top loading, installed power on the rotor 37 kw (50 HP), hydraulic unit power 4 kw (5,4 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 700 mm., ram stroke 800 mm., 44 reversible tools, 4 usable tool sides, 3 upper fixed blades, 3 lower fixed blades, 73 average rotor revolutions/min., weight 4460 kg, production 800-1200 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 500 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 37 kw, width: 700 mm. 27.56
used
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Rotor impact mill Type: RPMX 1116 Year of construction: 2016 Drive power: 200 kW Rotor diameter x height: 1,150 x 160 mm Grain spectrum: 0 - 15 mm Grinding gap adjustment: 4 - 6 mm Number of rackets: 8 pcs. Circumferential speed: max. 90 m/s Dimensions (LxWxH): 4,600 x 2,000 x 2,800 mm Total weight: approx. 10,000 kg SPECIFIC COMMENT - Factory refurbished 2023 - Rotor wear parts completely renewed - Both outlet shafts renewed - Safety equipment renewed - Ideal for the recovery of valuable materials from metal-containing fine fractions (stainless steel and cable strands) - Without control (but can be offered)
used
DUAL SHAFT SHREDDER (next-to-new), Shredding chamber 1.500 x 900 mm, 37 kW a.c.drive with inverter, Sturdy supporting structure, Generous loading hopper, Machine dimensions LxWxH 3,53 x 1,99 x 2,98 mt., for plastics, wood, WEEE, industrial waste, bulk domestic waste and more, installed power : 37