subcategories machines for waste disposal and recycling

cat.-No. 2nd category level results
501 granulation plants 85
505 other machinery for waste disposal and recycling 422
502 presses 277
503 shredders 352
504 sieving machines 203
500 all machines for waste disposal and recycling order by entry date descending 1,553

Banner ad information  

latest results machines for waste disposal and recycling

503 shredders / Single shaft shredders
Entry date: 18.03.2024 item-No.: 163602347
approved
dealer
New in: 2009

used

check Seller: RS Recycling Solutions GmbH
Location: 52428 Jülich Land-de
add to watchlist

used Vecoplan VAZ. COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.

504 sieving machines / Screening machines
Entry date: 17.03.2024 item-No.: 163596067
approved
dealer
New in: 2016

used

check Seller: S&F GmbH - Siebmaschinen und Fördertechnik
Location: 88287 Grünkraut-Gullen Land-de
add to watchlist

used S+F ASM-100. S&F Screening Machine | Vibrating Screening Machine Type ASM-100 used (as good as new) Make: S&F GmbH Type: ASM-100 - #1 Year of construction: 2016 Condition: as good as new Screening capacity: approx. 5 - 10 m³/h (for cross-cut wood, wood chips and sawdust) Fractions: 2 Screen area: 1.0 m² per screen mesh size Screen decks: 1 piece Mesh size of sieve: - 1st screen deck: perforated sheet screen punched, D = 20 mm or by arrangement. Drive power: 1.1 kW L x W x H: 2,300 x 1,250 x 1,050 mm Design: ECO Line Machine weight: approx. 600 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Design of the material outlet according to customer requirements The screening machine has been checked, painted and is in a very good condition (as good as new) (see pictures). Vibrating screen was restored (flange bearings) and new vibrating ...

502 presses / Paper baling press
Entry date: 17.03.2024 item-No.: 163596000
New in: 2014

used

Seller:
Location: Land-de
add to watchlist

used Paal Pacomat III-50 C. Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 486 kN (50 t) Specific pressing force: 6.5 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Main pump capacity: 130 l/min. Total connected load: 39 kW, Nominal current: 83 A Back-up fuse min.: 100 A Back-up fuse max.: 100 A Throughput at idle: approx. 295 m³/h Throughput under operating conditions: approx. 120 m³/h Output at 35 kg/m³: approx. 4.2 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 750 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) x 2,460 mm (L x W x H) Machine weight: approx. 12 t

505 other machinery for waste disposal and recycling
Entry date: 13.03.2024 item-No.: 163569342
approved
dealer
New in: 1995

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl
add to watchlist

used Svedala 2200-1200 Feed chute. Feeding chute Svedala Brand: Svedala Length 2200 mm - Width 1200 mm with two vibration motors of 1.3 kW each

502 presses / Channel baling presses
Entry date: 13.03.2024 item-No.: 163569247
New in: 2002

used

Seller: ARTechnic
Location: 43300 Bielsko-Biala Land-pl
add to watchlist

used PAAL Pacomat 5. Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance

502 presses / Channel baling presses
Entry date: 13.03.2024 item-No.: 163569245
New in: 2011

used

Seller: ARTechnic
Location: Land-pl
add to watchlist

used PAAL Pacomat V-80 C. Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic

503 shredders / Single shaft shredders
Entry date: 12.03.2024 item-No.: 163561090
approved
dealer

used

check Seller: agicom-pedergnana OG
Location: Land-at
add to watchlist

used Forrec AE-600R. Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg

503 shredders / Shredders
Entry date: 12.03.2024 item-No.: 163560158
New in: 1999

used

Seller: Karl Bachl Kunststoffverarbeitung GmbH & Co. KG
Location: Land-de
VS add to watchlist

used SAW Werschkull 4100 1520. For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

502 presses / Paper baling press
Entry date: 11.03.2024 item-No.: 163553878
New in: 2023

used

Seller: HFM-Group - Dienstleistungen
Location: Land-de
Price: VB 4.900 € add to watchlist

used Macfab 75. We offer one of our new paper balers from MacFab for sale. This is the "75" model. We have several in use, since we have currently closed a location, the press will now be handed over. It is in absolutely excellent condition. It was on weekly duty from August 2023 to February 2024. Details can be found in the pictures. If you have any further questions, please do not hesitate to contact us!

505 other machinery for waste disposal and recycling / Sorting plants
Entry date: 11.03.2024 item-No.: 163553862
approved
dealer
New in: 2015

used

check Seller: RS Recycling Solutions GmbH
Location: Land-de
add to watchlist

used Pellenc Mistral 800. - Complete system - incl. conveyor belt width 800 mm - Incl. discharge hood with separating parting - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015

505 other machinery for waste disposal and recycling / Sorting plants
Entry date: 11.03.2024 item-No.: 163553861
approved
dealer
New in: 2015

used

check Seller: RS Recycling Solutions GmbH
Location: Land-de
add to watchlist

used Pellenc Mistral 2400. - Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015

505 other machinery for waste disposal and recycling / Sorting plants
Entry date: 11.03.2024 item-No.: 163553859
approved
dealer
New in: 2015

used

check Seller: RS Recycling Solutions GmbH
Location: Land-de
add to watchlist

used Pellenc Mistral 2400. - Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - incl. ADDITIONAL METAL DETECTOR - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015

503 shredders / Shredders
Entry date: 07.03.2024 item-No.: 163526877
approved
dealer
New in: 2003

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl
add to watchlist

used Kleemann SHB 14. Kleemann Impact Mill Brand: Kleemann. Type: SHB 14 Inlet opening: 1430 x 950mm Incl.: electric motor and inlet box

504 sieving machines / Screening machines
Entry date: 07.03.2024 item-No.: 163526875
approved
dealer
New in: 2003

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl
add to watchlist

used Kleemann 18/55-3. Screening machine Kleemann 18/55-3 Brand: Kleemann Screen surface: length 5500 mm, width 1800 mm - 3 deckers Incl.: engine and springs.

502 presses / Channel baling presses
Entry date: 07.03.2024 item-No.: 163526759
New in: 1993

used

Seller: ARTechnic
Location: 43300 Bielsko-Biala Land-pl
add to watchlist

used PRESONA LP50 VH2. Specifications Maximum pressure: 50 tons Press force: 63 tons/m² Duct cross-section: 720 x 1100 mm Bale weight: 400-550 kg Power supply: 400 V/ 37 kW Year of construction: 1993 Number of ties: 5 Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 17 tones Bale tying: automatic Press capacity under operating conditions: max 340 m³/hour Press capacity at idle: max 730 m³/hour Theoretical throughput: to density 30kg/m³) 10 tons/hour Theoretical throughput: to density 50kg/m³) 14 tons/hour Theoretical throughput: to density 100kg/m³) 22 tons/hour Brief description of the features: Open hopper allows filling with the conveyor belt. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press ...

503 shredders
Entry date: 05.03.2024 item-No.: 163510513
approved
dealer
New in: 2007

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl
add to watchlist

used Metso-Nordberg 1315 SR Impact mill. Impact mill Metso-Nordberg Brand: Metso / Nordberg Type: 1315 SR Inlet opening: 1550 x 950mm

502 presses / Channel baling presses
Entry date: 05.03.2024 item-No.: 163510502
New in: 2014

used

Seller: ARTechnic
Location: Land-pl
add to watchlist

used Strautmann BaleTainer. Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional

502 presses
Entry date: 04.03.2024 item-No.: 163504411
approved
dealer
ankerimg

used

checkTOP Seller: HERBOLD Meckesheim GmbH
Location: 74909 Meckesheim Land-de
add to watchlist

used HERBOLD EPS 75 Press screw. Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

503 shredders / Shredders
Entry date: 04.03.2024 item-No.: 163503565
approved
dealer
New in: 1994

used

check Seller: Kuno Floeter e.k.
Location: 67122 Altrip Land-de
Price: 17.000 € add to watchlist

used Erdwich/Erema Z 780 H. Twin shaft shredder from Erdwich, opening 800x780 mm, hydraulic drive 30 Kw., with control cabinet mounted on frame. 1 set of new knives additionally available.

504 sieving machines / Screening machines
Entry date: 02.03.2024 item-No.: 163490099
approved
dealer

used

check Seller: S&F GmbH - Siebmaschinen und Fördertechnik
Location: 88287 Grünkraut-Gullen Land-de
add to watchlist

used Bezner TWD. Bezner Screening Machine | Roller classifier type TWD Refurbished (workshop overhauled) - Make: Bezner - Type: TWD - Condition: refurbished - Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) - Screen area: 6.0 m² per screen mesh size - Fractions: 3 - Screen decks: 2 pieces - Drive power: 5.5 kW - L x W x H: 4,000 x 2,200 x 1,700 mm - Machine weight: approx. 5,500 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and ball plates are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibrating screen | Wood chip sieve | Vibrating Screening Machine | Standin ...

503 shredders / Shredders
Entry date: 02.03.2024 item-No.: 163490098
approved
dealer
New in: 1998

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: Land-nl
add to watchlist

used Kleemann SHB12. Kleemann Impact Mill Brand: Kleemann. Type: SHB 12 Inlet opening: 1430 x 1050mm Incl.: steel construction and inlet box.

503 shredders / Shredders
Entry date: 02.03.2024 item-No.: 163490097
approved
dealer
New in: 2003

used

check Seller: L. Koreman & Zn Handelsonderneming BV
Location: 6222 NS Maastricht Land-nl
add to watchlist

used SBM Austria HSB 125/112 4F. Impact mill SBM Austria Brand: SBM Austria Type: HSB 125/112 4F for hard rock Inlet opening : 1150 x 450 mm Incl.: E-Motor & Hydroliek-unit

504 sieving machines / Screening machines
Entry date: 26.02.2024 item-No.: 163446539
approved
dealer
New in: 2023

used

check Seller:
Location: München Land-de
add to watchlist

used Anlagenbau Günther MS ONE. Star Screening Plant 60/80mm Target - Screen Grain Electric drive with oversize recirculation for wood and lumpy material

502 presses / Baling presses
Entry date: 23.02.2024 item-No.: 163426999
approved
dealer
New in: 2004

used

check Seller: Intermachinery GmbH
Location: 67126 Hochdorf Assenheim Land-de
add to watchlist

used AVERMANN AVOS 1410. Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg

505 other machinery for waste disposal and recycling
Entry date: 23.02.2024 item-No.: 163426869
approved
dealer
New in: 2015

used

check Seller: RDA Recycling Machinery GmbH
Location: 28816 Stuhr/Bremen - Germany Land-de
add to watchlist

used Zeno ZSS 1200 x 4500 Disc separator. Disc separator Zeno, type ZSS 1200 x 4500, with FE separator and conveyor technology, very good condition Specifications Disc separator with elevation Manufacturer: Zeno Type: ZSS 1200 x 4500 Year of construction: 2015 Grain size: 0-30 mm Working width: 1200 mm Length: 4500 mm Drive power: 3 x 7.5 kW Separate control panel Elevation height: 1000 mm FE separators Manufacturer: Solau Type: DND-AC M5 Working width: 800 mm Drive power: 2.2 kW Self-Cleaning Device – Wiper Conveyor Feed belt Length: 5000 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.3 m/s Discharge belt Length: 3500 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.4 m/s Discharge height: min. 2000 mm C ...

503 shredders / Shredders
Entry date: 23.02.2024 item-No.: 163426840
approved
dealer
New in: 2011

used

check Seller: RDA Recycling Machinery GmbH
Location: Land-de
add to watchlist

used Höcker Polytechnik PHSS 40/110. Hump shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Material: Punching Waste, Cardboard Punching Mesh, Corrugated Cardboard

503 shredders / Shredders
Entry date: 22.02.2024 item-No.: 163416354
approved
dealer
New in: 2009

used

check Seller: Intermachinery GmbH
Location: 67126 Hochdorf Assenheim Land-de
add to watchlist

used HAMMEL VB 750 D. With magnet

503 shredders / Shredders
Entry date: 22.02.2024 item-No.: 163415552
approved
dealer
New in: 2020

used

check Seller: Intermachinery GmbH
Location: Land-de
add to watchlist

used Willibald EP 5500. 32 solid single flails

502 presses / Baling presses
Entry date: 22.02.2024 item-No.: 163415551
approved
dealer
New in: 1996

used

check Seller: Intermachinery GmbH
Location: Land-de
add to watchlist

used BOA 2060 30K. Tot.kW 43 Volt 400V /50Hz

503 shredders / Shredders
Entry date: 21.02.2024 item-No.: 163408068
New in: 1989

used

Seller: ARTechnic
Location: 43300 Bielsko-Biala Land-pl
add to watchlist

used EBA 3040 EC. Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW

502 presses / Baling presses
Entry date: 21.02.2024 item-No.: 163407266
New in: 2001

used

Seller: ARTechnic
Location: 43300 Bielsko-Biala Land-pl
add to watchlist

used HSM KP 88. Specifications Maximum pressure: 9 tons Duct cross-section: 500 x 500 mm Power supply: 400 V/ 50 Hz Year of construction: 2001 Dimensions of the tailgate: 400 x 450 mm

502 presses / Baling presses
Entry date: 21.02.2024 item-No.: 163407264
New in: 1991

used

Seller: ARTechnic
Location: 43300 Bielsko-Biala Land-pl
add to watchlist

used HSM 12 GIGANT. Specifications Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000)mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1991 Productivity: approx. 3 bales/hr

502 presses / Baling presses
Entry date: 21.02.2024 item-No.: 163407261
New in: 2003

used

Seller: ARTechnic
Location: 43300 Bielsko-Biala Land-pl
add to watchlist

used HSM 155.2 VL. Specifications Maximum pressure: 16 tons Press force: 2.08 kg/cm² Bale size: 1100x700x800 mm Bale weight: approx. 150-250 kg Power supply: 400V / 4kW Year of construction: 2003 Productivity: approx. 3 bales/hr Machine is fully functional, after technical supervision.

502 presses / Channel baling presses
Entry date: 21.02.2024 item-No.: 163407205
New in: 2020

used

Seller: ARTechnic
Location: Land-pl
add to watchlist

used PAAL Pacomat II-50 D. Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1050 mm Year of construction: 2020 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 8.5 tons/hour Theoretical throughput to density 50kg/m3: 11.6 tons/hour

502 presses / Channel baling presses
Entry date: 21.02.2024 item-No.: 163407203
New in: 2015

used

Seller: ARTechnic
Location: Land-pl
add to watchlist

used PAAL Pacomat II-50 C. Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1200 mm Year of construction: 2015 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 6.7 tons/hour Theoretical throughput to density 50kg/m3: 9 tons/hour Press capacity: max 190 m³/h

502 presses / Baling presses
Entry date: 20.02.2024 item-No.: 163400179
approved
dealer

used

check Seller: Brauner Recyclingtech GmbH
Location: 49324 Melle Land-de
add to watchlist

used WELGER SB 2000L. automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t

502 presses / Baling presses
Entry date: 20.02.2024 item-No.: 163400173
approved
dealer

used

check Seller: Brauner Recyclingtech GmbH
Location: Land-de
add to watchlist

used WELGER SB 2000. automatic baler Manufacturer: WELGER Type: SB 2000 Machine No.: 1307 51 584 specifications: Pressing force: 7 t Drive power: 11 kW Fuse: 35 A Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t Machine dimensions: approx. 4,600 x 2,000 x 2,015 mm (L x W x H)

505 other machinery for waste disposal and recycling / Conveying belts
Entry date: 19.02.2024 item-No.: 163394181
approved
dealer
New in: 2018

used

check Seller: Rottenkolber Umwelttechnik
Location: 84072 Au in der Hallertau Land-de
Price: VB 17.500 € add to watchlist

used SHW 7 m. Screw conveyor for various materials in very high-quality design with replaceable wear parts, electrically driven, feed length approx. 7 m, feed width approx. 1 m, discharge in the middle, hardly run, very good condition, for example suitable for filling a conveyor belt with the wheel loader, etc.

503 shredders / Double shaft shredders
Entry date: 19.02.2024 item-No.: 163394175
approved
dealer
New in: 2013

used

check Seller: Rottenkolber Umwelttechnik
Location: 84072 Au in der Hallertau Land-de
Price: VB 225.000 € add to watchlist

used Komptech Crambo 5200 direkt. Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

503 shredders / Pre-shredders
Entry date: 18.02.2024 item-No.: 163387195
approved
dealer
New in: 2012

used

check Seller: Rottenkolber Umwelttechnik
Location: 84072 Au in der Hallertau Land-de
Price: VB 215.000 € add to watchlist

used Doppstadt DW 3060 Biopower. Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.

back