We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 304)
used
COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...
used
Platen dimensions: 1700x1250mm, with documentation, an inspection is possible.
used
Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.
used
Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.
used
M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp
used
Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018.
used
Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included
used
COEMTER BAG MAKER for BAGS-ON-ROLL TER CORE, type 92-90 38-25, constructed in 2001, n.2 nearly equal machines available, For LDPE LLDPE HDPE, Max bag width 900 mm., The machine is offered checked for good conditions, Constructors description:, AUTOMATION OF THE MANUFACTURING PROCESS, Bag making machines in continuous for bags in roll with core, with two tracks, making point-of-sale bags, freezer bags, refuse collection bags, etc., Robust and high-tech construction with continuous movement design to guarantee maximum reliability and minimum and easy maintenance., The sealing drum makes possible to work at low temperatures thanks to the long sealing time, and offers excellent adaptability to different types of materials, with maximum sealing guarantee., Mixed sealing optional., Use of independent band aligners before rewinding for perfect roll making., Placement of core container at floor ...
used
THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp
used
Two full lines forming MEICO FC600 WM Meico FC 600E thermoforming machine Year: 2006
used
THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...
used
used
M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...
used
A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content v ...
new
The ENR series are air-cooled chillers for industrial use for outdoor and indoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Cooling capacity 13.5 Kw We have a lot of chillers available directly from stock used and new. contact us for a non-binding offer.
used
I will sell Armor thermoforming machine, 1990s, fully renovated and renovated, all electronic devices replaced. Fully functional. Working area 2000x1800x650. Vacuum included. bathtub: 2000x2700 mm
used
complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR
used
Multivac R085 Seeking an entry-level thermoformer with exceptional adaptability? Look no further than the Multivac R085! This powerful machine seamlessly integrates into diverse production lines, tackling standard applications with an impressive level of configuration. Unmatched Versatility: 5 Diverse Tooling Options: Choose from 1×1, 1×3, 2×2, 4×1, or 4×2 configurations to perfectly suit your packaging needs. Flexible Packaging Sizes: Create packages ranging from 100×97.75mm to 375x185mm, accommodating various products. Adjustable Forming Depth: Adapt to product heights up to 80mm for optimal presentation and protection. Additional Highlights: User-Friendly Operation: Streamline your workflow with an intuitive interface. Durable Construction: Built to last in demanding production environments. Cost-Effective Solution: Ideal for businesses seeking performance without break ...
used
Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.
used
Thermopak LPA10 packaging machine Thermopack LPA10 Year: 2006 power: 16Kw
used
OMSO DM144/ 6 LIDS, 6-Color Lid Printer, only used for 26,000 hrs ! Infeed Conveyor for feeding Vertical Lid Stacks Robotic removal of Lids from stack to Print Conveyor Auto-Denester Unit No Lid no Ink and No Lid no Print System ARCOTEC CG20-2 Pretreatment station Main 6-Color Print Unit Speed Control for Ink Fountain Rollers Printing Roller self-cleaning device Max. speed 30,000 Lids/ hr (depending on Lid size & shape) Max. Lid dia. Ø 200 mm Min. Lid dia. Ø 50 mm Max. Lid Height 25 mm Max. Rectangular Lid size: 200 x 200 mm Max. Printing dimensions: 180 x 180 mm No. of Printing Blankets 4 UV Tunnel TUV 0077-99 UV-Tunnel power rating : 8 kW Main printer power rating: 20kW Polytype Counter/ Stacker unit delivers Counted Lid Stacks. 400 V 3phase, 50 Hz, Printing Plate Pre-registration Unit. with Monitor Display
used
A device for closing trays by Multivac with a capacity of up to 20 cycles per minute. This Multivac T700 packer is in very good condition with only 429 operating hours. This particular model comes with the SKIN packing tool. Tray size: 238 x 166 (D13); New Busch vacuum pump 360m3 / h; Input conveyor; Water cooling unit; Instructions;
used
PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts
used
Tray thermoforming machine for packaging meat products and derivatives. Compact machine made up of a thermoforming module, loading area, upper film applicator, welding area and cross section. Bottom film width: 520mm Upper film width: 515mm Mold 4 x 2 trays dimensions: 150 x 120mm With ink injector IMAGE mod. 9040
used
Used Van Dam 568 COMIII , 8-Color Cup Printing Line, Age 1999:- Dual Lane Auto Elevator Tray Feeder Cross conveyor Standard Van Dam "Goose-neck" Cup Stack feeder to Main Print Unit Universal Screw Denester SOFTAL Corona Pretreater with Leak Tester Main 8-Color Print unit. Modern New Style Print Heads Each Print head consisting of : 8 x precision ground rollers. UVITERNO MONO-JUMBO 8015, 9 kW UV-On Mandrel Curing Unit Dual Timing Belt Take-Off Counter/ Stacker Unit, with Ejector Tray Cup Rim dia. 50 to 200 mm. Max. taper 10°. Parker Hannifin IPX/ IPC Power Station PLC. Parker OPC with Color Display Touch Screen added new in 2013 Updated Vacuum Pump Max. Production Speed 500 Cups/ min depending on Cup size & Shape
used
Multivac C 500 is double chamber packing machine. This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber Machine dimensions W x D x H (with open chamber lid) in mm: 1,600 x 1,055 x 1,365 Sealing bar arrangement/dimensions: 1 x front, 1 x rear (2 x 650 mm)
used
ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts
used
Little used automatic horizontal packaging machine Enflex F-19 for shaping and filling bags of heat-sealed foils. The machine is equipped with a device for gluing plastic zippers. The machine is without a discharge conveyor and a dispenser. Bag size width - min. 80 mm / max.190 mm height - min.120 mm / max. 300 mm bottom - min 40 mm / max 100 mm weld width top weld 6 mm, vertical weld 9 mm Machine output 30 to 50 bags per minute
used
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table
used
Capacity : 7,200 pieces (40 grams) per hour Machine is useful for honey, jam, butter, chocolate, margarine, ketchup, yogurt, water, juice, liquid soap, various medicines,